• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.2
• /
• pp.189-194
• /
• 2018

Nowadays most integrated circuits are built using the bulk CMOS technology, but it has much difficulty in further reduction of the power consumption and die size. As a super low-power technology to solve such problems, the SOI technology attracts great attention recently. In this paper, the study results of the temperature dependency of the hot carrier effects in the n-channel MOSFETs fabricated on the thin SOI substrate were discussed. In spite that the devices employed the LDD structure, the hot carrier effects were more serious than expected due to the high series resistance between the channel region and the substrate contact to the ground, and were found to be less serious for the higher temperature with the more phonon scattering in the channel region, which resulted in reducing the hot electron generation.

• Journal of information and communication convergence engineering
• /
• v.11 no.4
• /
• pp.288-292
• /
• 2013

In this paper, a carbon implant is investigated in detail from the perspectives of performance advantages and side effects for the thick n-type metal-oxide-semiconductor field-effect transistor (n-MOSFET). Threshold voltage ($V_{th}$) adjustment using a carbon implant significantly improves the $V_{th}$ mismatch performance in a thick (3.3-V) n-MOS transistor. It has been reported that a bad mismatch occurs particularly in the case of 0.11-${\mu}m$ $V_{th}$ node technology. This paper investigates a carbon implant process as a promising candidate for the optimal $V_{th}$ roll-off curve. The carbon implant makes the $V_{th}$ roll-off curve perfectly flat, which is explained in detail. Further, the mechanism of hot carrier injection lifetime degradation by the carbon implant is investigated, and new process integration involving the addition of a nitrogen implant in the lightly doped drain process is offered as its solution. This paper presents the critical side effects, such as Isub increases and device performance shifts caused by the carbon implant and suggests an efficient method to avoid these issues.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1105-1108
• /
• 2003

In this paper, we have fabricated the hydrogenated n-channel polysilicon thin film transistor (TFT) with LDD structure and have analyzed the hot carrier degradation characteristics by electrical stress. We have compared the threshold voltage (Vth), sub-threshold slope (S), and trans-conductance (Gm) for devices with LDD (Lightly Doped Drain) structure and non-LDD at same active sizes. We have analyzed the hot carrier effects by the hydrogenation in devices. As a analyzed results, the threshold voltage, sub-threshold slope for n-channel poly-si TFT were increased, trans-conductance was decreased. The effects of hydrogenation in n-channel poly-si TFT with LDD structure were shown the lower variations of characteristics than devices of the non-LDD structure with nomal process.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.8
• /
• pp.63-71
• /
• 1993

To verify validity of the steady-state Nyquist theorem and the steady-state Nyquist theorem with hot carrier effects in semiconductor devices, we calculate thermal noise in n-i-n structures using both the steady-state Nyquist theorem and the Monte-Carlo method, and compare the results from these two-methods. When the carrier temperature is not far from the lattice temperature, the results from both methods agree with each other very well, but in the hot carrier regime there are some discrepancies. Our results support the argument that for MOSFETs and MESFETs operating in the linear region, the channel thermal noise should be explained by the steady-state Nyquist theorem rather than by the existing theories.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.2
• /
• pp.36-45
• /
• 1993

The n-channel MOSFETs with gate-$n^{-}$S/D overlapped structure have been fabricated by ITLDD(inverse-T gate lightly doped drain) technology. The gate length(L$_{mask}$) was 0.8$\mu$m. The degradation effects of hot carriers injected into the gate oxide were analyzed in terms of threshold voltage, transconductance and drain current variations. The degradation dependences on the gate voltage and drain voltage were characterized. The devices with higher n-concentration showed higher resistivity against the hot carrier injection. As the results of investigating the lifetime of the device, the lifetime showed longer than 10 years at V$_{d}$ = 5V for the overlapped devices with the implantation of an phosphorus dose of 5$\times$10$^{13}$ cm$^{-2}$ and an energy of 80 keV in the n$^{-}$resion.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.40-40
• /
• 2009

The electrical characteristic of the conventional self-aligned polycrystalline silicon (poly-Si) TFTs are known to present several undesired effects such as large leakage current, kink effect and hot-carrier effects. In this paper, LTPS TFTs with different GOLDD length were fabricated and investigated the effect of the GOLDD. GOLDD length of 1, 1.5 and $2{\mu}m$ were used, while the thickness of the gate dielectrics($SiN_x/SiO_2$) was fixed at 65nm(40nm/25nm). The electrical characteristics show that the kink effect is reduced at the LTPS TFTs, and degradation from the hot-carrier effect was also decreased by increasing GOLDD length.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.11
• /
• pp.869-873
• /
• 2001

The effects of alternate bias stress on p-channel poly-Si TFT\`s has been systematically investigated. We alternately applied positive and negative bias stress on p-channel poly-Si TFT\`s, device Performance(V$\_$th/, g$\_$m/, leakage current, S-slope) are alternately appeared to be increasing and decreasing. It has been shown that device performance degrade under the negative bias stress while improve under the positive bias stress. This effects have been related to the hot carrier injection into the gate oxide rather than the generation of defect states within the poly-Si/SiO$_2$ interface under alternate bias stress.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.172-175
• /
• 2009

n-type crystalline silicon wafers were passivated with intrinsic a-Si:H thin films on both sides using HWCVD. Minority carrier lifetime measurement was used to verify interface passivation properties between a-Si:H thin film and crystalline Si wafer. Thin film interface characteristics were investigated depending on $H_2/SiH_4$ ratio and hot wire deposition temperature. Vacuum annealing were processed after deposition a-Si:H thin films on both sides to investigate thermal effects from post process steps. We noticed the effect of interface passivation properties according to $H_2/SiH_4$ ratio and hot wire deposition temperature, and we had maximum point of minority carrier lifetime at H2/SiH4 10 ratio and $1600^{\circ}C$ wire temperature.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.142-142
• /
• 2012

최근 반도체 산업의 발전과 동시에 소자의 집적화에 따른 단채널 효과가 문제되고 있다. 채널 영역에 대한 게이트 영역의 제어능력이 떨어지면서 누설전류의 증가, 문턱전압의 변화가 발생하며, 이를 개선하기 위해 이중게이트 혹은 다중게이트 구조의 트랜지스터가 제안되었다. 하지만 채널길이가 수십나노미터 영역으로 줄어듦에 따라 소스/드레인과 채널간의 접합형성이 어렵고, 고온에서 열처리 과정을 거칠 경우 채널의 유효길이를 제어하기 힘들어진다. 최근에 제안된 Junctionless 트랜지스터의 경우, 소스/드레인과 채널간의 접합이 없기 때문에 접합형성 시 발생하는 공정상의 문제뿐만 아니라 누설전류영역을 개선하며, 기존의 CMOS 공정과 호환되는 이점이 있다. 한편, 집적화되는 반도체 기술에 따라, 동작 시 발생하는 스트레스가 소자의 신뢰성에 중요한 요인으로 작용하게 되며, 현재 Junctionless 트랜지스터의 신뢰성 특성에 관한 연구가 부족한 상황이다. 따라서, 본 연구에서는 Junctionless 트랜지스터의 NBTI 특성과 hot carrier effect에 의한 신뢰성 특성을 분석하였다. Junctionless 트랜지스터의 경우, 축적모드로 동작하기 때문에 스트레스에 의해 유기되는 캐리어의 에너지가 낮다. 그 결과, 반전모드로 동작하는 Junction type의 트랜지스터에 비해 스트레스에 의한 subthreshold swing 기울기의 열화와 문턱전압의 이동이 감소하였다. 또한 소스/드레인과 채널간의 접합이 없기 때문에 hot carrier effect에 의한 게이트 절연막 및 계면에서의 열화가 개선되었다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.82-89
• /
• 2017

In this work, InGaZnO thin film transistors with Ni, Al and ITO source and drain electrode materials were fabricated to analyze a hot carrier induced device degradation according to the electrode materials. From the electrical measurement results with electrode materials, Ni device shows the best electrical performances in terms of mobility, subthreshold swing, and $I_{ON}/I_{OFF}$. From the measurement results on the device degradation with source and drain electrode materials, Al device shows the worst device degradation. The threshold voltage shifts with different channel widths and stress drain voltages were measured to analyze a hot carrier induced device degradation mechanism. Hot carrier induced device degradation became more significant with increase of channel widths and stress drain voltages. From the results, we found that a hot carrier induced device degradation in InGaZnO thin film transistors was occurred with a combination of large channel electric field and Joule heating effects.