• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.1073-1087
• /
• 1993

Many investigations have been carried out concerning tillage tool performance, including energy requirement . Since the performance of tillage could also be evaluated through the change of soil , then it is necessary to investigate the soil cutting process and the pattern of soil failure. This study was conducted using indoor soil bin, STILT (Soil Tillage Tool Interaction) system. The result shows that the soil bin experiments could provide the clear understandings about phenomena of soil failure. The movement of sil , the successive failures was clearly visualized. The relations between the horizontal and vertical forces to the linear motion blade, the shear force on the shear plane which devides soil layer into several segments were indicated by the fluctuation/vibration of the recorded resistance and forces. The results show that the horizontal force(Fx) and vertical force (Fz) develope their frequencies as the change of velocity of blade (10, 20, 40 mm/sec) for each cutting angle (35, 45, 60 degrees). Resultant force of Fx and Fz are much influenced by the cutting angle.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.8
• /
• pp.42-50
• /
• 2013

The reactionary responses to control human standing dynamics were estimated under the assumption that postural complexity mainly occurs in the mid-sagittal plane. During the experiment, the subject was exposed to continuous horizontal perturbation. The ankle and hip joint rotations of the subject mainly contributed to maintaining standing postural control. The designed mobile platform generated anterior/posterior (AP) motion. Non-predictive random translation was used as input for the system. The mean acceleration generated by the platform was measured as $0.44m/s^2$. The measured data were analyzed in the frequency domain by the coherence function and the frequency response function to estimate its dynamic responses. The significant correlation found between the input and output of the postural control system. The frequency response function revealed prominent resonant peaks within its frequency spectrum and magnitude. Subjects behaved as a non-rigid two link inverted pendulum. The analyzed data are consistent with the outcome hypothesized for this study.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.8
• /
• pp.21-29
• /
• 2013

The functional behaviors of human standing postural control were investigated when they were exposed to long-term horizontal vibration in the sagittal plane. For complexity of human postural control, a useful alternative method that has been based on a black-box approach was taken; that is, where the feedback mechanism was lumped into a single element. A motor-driven support platform was designed as a source of vibration. The AC Servo-controlled motors produced continuous anterior/posterior (AP) motion. The data were analyzed both in the time and frequency domain. The cross-correlation and coherency functions were estimated. Subjects behaved as a non-rigid pendulum with a mass and a spring throughout the whole period of the platform motion, as consistent with the plan chosen for this study.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.208-213
• /
• 2008

Since The measured solar radiation incident on tilted surfaces by all directions has been widely used as important solar radiation data in installing solar flat-plate collectors. To maximize the incident beam radiation, the slope, which is the angle between the plane of the surface in question and the horizontal, and the solar azimuth angles are needed for these solar thermal systems. This is because the performance of the solar thermal system is much affected by angle and direction of incident rays. Recognizing those factors mentioned above are of importance, actual experiment has been performed in this research to obtain the angle of inclination with which the maximum incident rays can be absorbed. The results obtained in this research could be used in installing optimal solar flat-plate collectors.

• Journal of Oral Medicine and Pain
• /
• v.6 no.1
• /
• pp.9-14
• /
• 1981

Maximal active movements of the mandible in the vertical and the horizontal plane were measured in 106 mem and 78 women. ranging from 20 to 29 years old, with a method devised by agerberg. The studied persons who were dental students of the School of Dentistry Seoul National University (SNU), nurses and dental auxiliaries of the SNU Hospital, had no pain or severe symptoms of dysfunction of the masticatory system. The obtained results were as follows : 1. The mean values for maximal opening and protrusion differed significantly between men and women, 55.9 mm and 49.7 mm, 9.3 mm and 7.4 mm respectively. 2. The means found for maximal lateral movement to the right and to the left were practically the same, 8.5 - 9 mm and did not differ with sex. 3. The lower limit of the normal range of horizontal movements may be regarded as 4 mm for men and 3 mm for women and maximal opening as 44 mm for men and 39 mm for women. 4. The maximal mandibular movement ranges of 20-year old person with 95 % probability were calculated and presented grphically.

• Journal of computational fluids engineering
• /
• v.4 no.2
• /
• pp.1-8
• /
• 1999

Natural convection in a horizontal annulus with the inner cylinder heated by the application of a constant heat flux and the isothermally cooled outer cylinder is considered, and the transition of flows and the bifurcation phenomenon are numerically investigated for air with Pr=0.7. The zero initial condition always induces a crescent-sheped eddy flow. A bicellular flow in which the fluid descends along the vertical central plane of the annulus can be obtained at high Rayleigh number by introducing artificial numerical disturbances. Dual solutions are found above a certain critical Rayleigh number. Hysteresis phenomena have not been observed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.4
• /
• pp.551-561
• /
• 1997

Mixed convection of air in a horizontal concentric cylindrical annulus is investigated numerically. Isothermal boundary conditions are prescribed at the inner and outer cylinders, with the inner cylinder being warmer. The forced flow is induced by the outer cylinder which is rotating slowly with constant angular velocity with its axis at the center of the annulus. The effect of the forced flow on the flow pattern and heat transfer of natural convection is investigated for the annulus of (inner-cylinder radius/gap width) = 1. There appear two eddies, one eddy or no eddy according to the Rayleigh and Reynolds numbers. Map of the three flow regimes is constructed on the Ra-Re plane. (author). 28 refs., 9 figs., 2 tabs.

• Journal of Oral Medicine and Pain
• /
• v.9 no.1
• /
• pp.51-64
• /
• 1984

In order to obtain the basic data of movements of the mandible for diagnosis and prgnosis determination of the TMJ dysfunction, the author measured the ranges and shapes of movements of the mandibule in the frontal, sagittal and horizontal trajectory with Saphon Visi-Trainer C-Ⅱ(Tokyo Shizaisha Inc.) in 61 men. The subjects who were undergraduate and graduate students of the School of Dentistry, Seoul Nationa University(SNU) had no pain or symptoms of dysfunction of the masticatory system. The obtained results were as follows: 1. The mean for maximal right and left laterotrusion in the frontal trajectory were 11.3 mm and 10.9mm, respectively and didn't differ significantly. Right and left larero-opening at 15mm, 25mm and 35mm mouth opening respectively didn't differ significantly. Area of border movement of the mandible was 770.33㎟. 2. The mean for maximal protrusion in the sagital trajectory was 10.2mm, antero-posterior deviation between ICP and RCP 1.2mm and angel of maximal protrusion and horizontal plane 20.5。. 3. The mean for right and left laterotrusion is 11.1mm &11.2mm,respectively, and didn't diffef significantly.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.436-438
• /
• 2003

Wind-induced oscillations are known to cause damage to the conductors and related hardware through fatigue, clashing of the bundled conductors and bolt loosening. Wake-induced oscillations have been known since the advent of bundled conductors, they are caused by aerodynamically unstable forces acting on the leeward conductors in the wake of the windward conductors, They take the form of horizontal galloping, snaking or rolling, in which case all subconductors move together in unison. They can also take the form of the subspan oscillation, which appear as elliptical motions of the subconductors moving out of phase, mainly in the horizontal plane within a subspan. In order to decrease amplitudes of the oscillation, this paper examines the application status of the spacer dampers and suggests proper installation methods.

• Geomechanics and Engineering
• /
• v.5 no.4
• /
• pp.299-312
• /
• 2013

The horizontal pullout capacity of a group of two vertical strip plate anchors, placed along the same vertical plane, in a fully cohesive soil has been computed by using the lower bound finite element limit analysis. The effect of spacing between the plate anchors on the magnitude of total group failure load ($P_{uT}$) has been evaluated. An increase of soil cohesion with depth has also been incorporated in the analysis. For a weightless medium, the total pullout resistance of the group becomes maximum corresponding to a certain optimum spacing between the anchor plates which has been found to vary generally between 0.5B and B; where B is the width of the anchor plate. As compared to a single plate anchor, the increase in the pullout resistance for a group of two anchors becomes greater at a higher embedment ratio. The effect of soil unit weight has also been analyzed. It is noted that the interference effect on the pullout resistance increases further with an increase in the unit weight of soil mass.