• Transactions of the Korean Society of Mechanical Engineers
• /
• v.2 no.2
• /
• pp.47-51
• /
• 1978

In order to improve the hitting rate in the shot of rifles, it is required that the analysis of exterior ballistics and the line of sight. One of the important factors influenced a marksman using a rifle obtained the zero-setting of a rifle at the horizontal range, is the deviation of the impact point from the aiming point when the shooting is performed in an inclined ranges. The deviation usually cccurs from the reaction force along the bore line, the characteristics of exterior ballistics, and the error of a shooting range judgement by the inclined range. This study is concerned with the problem of the vertical difference between the impact and aiming point in the inclined shooting ranges. The computing method to find the vertical difference is represented. This method is applied for and experimental rifle in three cases, (1) hofizontal shooting ranges, (2) upper inclined shooting ranges, and (3) lower inclined shooting ranges.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.20 no.1
• /
• pp.71-78
• /
• 1990

This research was made to investigate the change of the image layer and of the vertical and horizontal magnification on the Panelipse radiographic image by the control of profile index. Using the Panelipse, a series of 60 exposures were taken with the steel balls placed in the holes of the plastic model plate, and then evaluated by 4 observers. Two points were assigned for a reading of sharp, one for middling sharp, and zero for unsharp. Each ball image then could be given a total reader score of 0 to 8. The author analyzed the image layer as defined by a sharpness score of 6 or more. The results obtained were as follows: As the profile index was increased, the shape of the image layer was not changed, and the width of the image layer was increased, and the position of the layer shifted away from the rotation center. As the profile index was increased, the ranges of vertical and horizontal magnification was increased, especially the ranges of horizontal magnification was greater than that of vertical magnification.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.11
• /
• pp.63-69
• /
• 1995

A novel programming architecture for antifuse FPGA(Field Programmable Gate Array) is described. This architecture prevents programming transistors from breakdown which occurs due to high voltage across the transistors during antifuse programming. Extra mask and processes can be avoided using this proposed architecture. To reduce the applied voltage across the terminals of programming transistors, different voltage ranges are supplied to vertical and horizontal tracks; between programming voltage Vp and Vp/2 for vertical tracks and between Vp/2 and 0V for horizontal tracks. Therefore, Maximum voltage across the programming transistors is half of the programming voltage and an designated antifuse can be programmed by applying maximum voltage for vertical track and minimum voltage for horizontal track while others are subjected to voltage difference below Vp/2.

• Journal of Biosystems Engineering
• /
• v.18 no.3
• /
• pp.191-198
• /
• 1993

Vertical and horizontal ride vibrations of the selected agricultural tractors were measured and evaluated with respect to the ISO 2631 'guide for the evaluation of human exposure to whole body vibration'. Evaluation showed that at the normal transportation speeds of 1.4~20km/h on both the concret and ground surfaces tractor drivers were exposed to the vibrations whose magnitudes exceed the 8 hour fatigue decreased proficiency boundary in the frequency ranges of 2~16Hz in vertical and 1~2Hz in horizontal directions. Considering that tractor operation becomes as one of the specialized job for the future farming in Korea, measures must be made to protect the drivers against harmful ride vibrations of agricultural tractors.

• Journal of the Korean Geographical Society
• /
• v.39 no.4
• /
• pp.528-543
• /
• 2004

The biogeographical approach on the species composition, distributional range, and life form of native Korean conifers suggests that the Korean Peninsula harbors 4 families 10 genera 30 species. Early-evolved conifers maintain high species diversity and broad distribution. During the glacial periods, the ranges of cold-tolerant conifers expanded, on the other hand, those of warmth-tolerant ones reduced. Presence of endemic subalpine conifers might be the result of long-term isolation of conifers on high mountains. Horizontal and vertical ranges of native Korean conifers are classified into alpine, subalpine, montane, coastal, insular and disjunctive types, and then subdivided into twelve sub-types. Typical life form of native Korean conifers is evergreen tree, blooms in spring, and fruits ripe in autumn or following autumn. Oval and elliptical seeds with wing might be beneficial for their dispersal. Further works on the migration, dispersal, genetics, ecology of native Korean conifers are required for the better understanding of the biogeography of conifers.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.11
• /
• pp.1028-1034
• /
• 2004

Recently, the ice storage system using ice slurry has been used increasingly since it has been introduced where the rapid cooling load change is required. Because it overcomes a decrease of the melting performance and an increase of the thermal resistance on the ice layer in static ice thermal storage system. This study is performed to understand the effects of transporting ice slurry through horizontal, vertical and inclined tubes ($30^{\circ},\;45^{\circ}$). It used propylene glycol-water solution and ice particles (diameter of about 2 mm) in this experiment. The experiments were carried out under various conditions, with concentration of water solution ranging from 0 to $20wt\%$, and velocity of water solution at the entry ranging from 1.5 to 2.5 m/s. The results were as follows: Regarding the angle of inclined tube, the highest pressure loss was measured for vertical tube and the pressure loss for $45^{\circ},\;30^{\circ}$, horizontal straight tubes were lower successively. The lowest pressure loss in these tubes was measured at velocity of $2.0{\sim}2.5m/s$ and concentration of $10wt\%$. The outlet IPF was likewise stable in these ranges.

• Journal of Oral Medicine and Pain
• /
• v.6 no.1
• /
• pp.9-14
• /
• 1981

Maximal active movements of the mandible in the vertical and the horizontal plane were measured in 106 mem and 78 women. ranging from 20 to 29 years old, with a method devised by agerberg. The studied persons who were dental students of the School of Dentistry Seoul National University (SNU), nurses and dental auxiliaries of the SNU Hospital, had no pain or severe symptoms of dysfunction of the masticatory system. The obtained results were as follows : 1. The mean values for maximal opening and protrusion differed significantly between men and women, 55.9 mm and 49.7 mm, 9.3 mm and 7.4 mm respectively. 2. The means found for maximal lateral movement to the right and to the left were practically the same, 8.5 - 9 mm and did not differ with sex. 3. The lower limit of the normal range of horizontal movements may be regarded as 4 mm for men and 3 mm for women and maximal opening as 44 mm for men and 39 mm for women. 4. The maximal mandibular movement ranges of 20-year old person with 95 % probability were calculated and presented grphically.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.8B
• /
• pp.1021-1027
• /
• 2011

VHF is generally used for data or voice communications between ships and land stations. Although there exist many analytical and empirical channel models for radio waves on land, over-the-sea models are very limited to basic description. In this paper, a VHF channel is measured using vertical and/or horizontal whip antennas on shore and a moving ship for various ranges. The results show that the Doppler shift and changes in power for various ranges are observed. We can also find that the statistical analysis results in that the statistical parameters are rapidly changes, especially for V/H and H/V channels.

• Wind and Structures
• /
• v.28 no.2
• /
• pp.99-110
• /
• 2019

Vortex-Induced-Vibration (VIV) is one kind of the wind-induced vibrations, which may occur in the construction and operation period of bridges. This phenomenon can bring negative effects to the traffic safety or can cause bridge fatigue damage and should be eliminated or controlled within safe amplitudes.In the current VIV studies, one available mitigation countermeasure, the horizontal flow-isolating plate, shows satisfactory performance particularly in PI shaped bridge deck type. Details of the wind tunnel test are firstly presented to give an overall description of this appendage and its control effect. Then, the computational-fluid-dynamics(CFD) method is introduced to investigate the control mechanism, using two-dimensional Large-Eddy-Simulation to reproduce the VIV process. The Reynolds number of the cases involved in this paper ranges from $1{\times}10^5$ to $3{\times}10^5$, using the width of bridge deck as reference length. A field-filter technique and detailed analysis on wall pressure are used to give an intuitive demonstration of the changes brought by the horizontal flow-isolating plate. Results show that this aerodynamic appendage is equally effective in suppressing vertical and torsional VIV, indicating inspiring application prospect in similar PI shaped bridge decks.

• The korean journal of orthodontics
• /
• v.27 no.1
• /
• pp.65-78
• /
• 1997

This study was carried out in order to determine soft tissue response to incisor movement and mandibular repositioning and to determine feasibility of predicting vertical and horizontal changes in soft tissue with hard tissue movement. For this study, cephalometric records of 41 orthodontically treated adult females who had Angle's Class II division 1 malocclusion were selected and stepwise multiple regression analysis was employed. Following conclusions were obtained by analysing the changes of soft tissue and hard tissue before and after treatment. 1. Hard tissue measurements that showed significant changes before and after treatment were horizontal and angular changes of maxillary incisor, horizontal,vertical and angular changes of mandibular incisor, overjet, overbite, interincisal angle, mandibular repositioning, A,B, skeletal convexity and soft tissue measurements that showed significant changes were horizontal, thickness and angular changes of upper lip, horizontal and angular changes of lower lip, interlabial angle, nasolabial angle labiomental angle, Sri, Ss, Si and soft tissue convexity(P<0.05). 2. All Soft tissue measurements changed significantly before and after treatment had between one and four hard tissue independent variables at statistically significant level, indicating that all soft tissue changes were direct relationship with hard tissue changes 3. Ova jet, horizontal change of maxillary incisor, horizontal change of maxillary root apex and horizontal change of pogonion entered into prediction equations most frequentely indicating that they were more significant variables in prediction of vertical and horizontal changes in the soft tissue with treatment, but vertical changes of mandibular incisor not entered any prediction equations, indicating that it was not considered a good predictor for soft tissue changes with maxillary incisor retraction. 4. Horizontal and vertical changes in subnasale were found to have most independent variables, significant at the 0.05 level in prediction-equations(${\Delta}$Sn(H):Ur, Is(H), Pg(H), UIA,${\Delta}$Sn(V): Is(H), Pg(H), overjet, A), indicating that subnasale changes are influenced by complex hard tissue interaction. 5. Multiple correlation coefficient($R^2$) of the soft tissue prediction equations ranges from 0.2-0.6.