• 제목/요약/키워드: hoop layer

검색결과 28건 처리시간 0.022초

복합재 연소관의 쐐기형 체결부 구조 해석 (The Structural Analysis of Wedge Joint in Composite Motor Case)

  • 황태경;도영대;김유준
    • 한국추진공학회지
    • /
    • 제4권3호
    • /
    • pp.64-73
    • /
    • 2000
  • 본 체결부는 필라멘트 와인딩으로 제작된 연소관, 복합재 쐐기 그리고 알루미늄 내부 링으로 구성된다. 여기서 연소관은 헬리컬 층과 후프 층으로 이루어져 있다. 이러한 복합재 연소관의 성능 향상을 위해 체결부의 설계 변수에 따른 유한 요소 응력 해석이 수행되었다. 이때 접착 층을 난-소성 거동 재질로, 쐐기부와 알루미늄 링간의 접촉 상태는 ABAQUS의 접촉 표면 요소로 모사 되었다. 또한 해석 결과의 정확성을 입증하기 위해 내압에 의한 체결부 밀림 변위와 연소관 몸체의 원주 방향 변형도를 수압 시험과 비교하였다. 쐐기와 알루미늄 링간의 완벽 접착은 쐐기와 연소관간의 접착 층에 높은 전단 변형을 발생시켜 체결부 조기 파괴의 원인이 된다. 쐐기와 알루미늄 링간의 미 접착은 쐐기와 연소관사이의 접착 층 전단 응력을 감소시키는 반면 내부 알루미늄 링의 미끄러짐 거동으로 체결부 복합재의 반경 방향 변형을 증가시켜 파괴를 유발하였다. 그러나 쐐기부와 알루미늄 링간의 미접착 상태에서, 원주 방향 와인딩으로 체결부 지점을 보강한 경우, 알루미늄 링의 미끌어짐이 억제되어 체결부 지점의 복합재 원주 방향 변형값이 감소했다.

  • PDF

FEV 자동차용 복합소재 연료탱크의 강도안전성에 미치는 기여율에 관한 해석적 연구 (The Effects of Affecting Ratios on the Strength Safety of a Composite Fuel Tank for FEV Vehicles)

  • 김청균;김도현
    • 한국가스학회지
    • /
    • 제15권1호
    • /
    • pp.35-39
    • /
    • 2011
  • 본 논문에서는 FEV 차량용 복합소재 연료탱크의 탄소섬유 적층두께에 따라 달라지는 강도안전성에 미치는 기여율의 영향을 해석하고자 한다. 기여율에 의한 영향을 FEM 모델링으로 고찰하기 위해, 복합소재 연료탱크의 알루미늄 라이너와 탄소섬유 적층에 작용하는 von Mises 등가응력을 후프방향과 헤리컬방향에 대하여 각각 계산 하였다. FEM 해석결과에 따르면, 알루미늄 라이너에 작용하는 등가응력 기여율은 후프방향으로는 77.5%, $70^{\circ}C$ 경사진 헤리컬방향으로는 18.11%, $12^{\circ}C$ 경사진 헤리컬방향으로는 4.39%로 각각 작용하는 것으로 나타났다. $12^{\circ}C$ 경사진 탄소섬유의 적층 두께비가 후프방향 적층 두께비의 42% 정도로 높게 유지됨에도 불구하고 알루미늄 라이너 소재에서 보여준 기여율 경향은 탄소섬유 적층의 강도안전성에 대해서도 유사한 것으로 나타났다. 결과적으로, 탄소섬유 연료탱크의 강도안전성은 탄소섬유 적층의 두께보다 와인딩 각도에 의해 더 많은 영향을 받는다는 계산결과를 보여주고 있다.

Type 2 고압용기를 위한 금속선재의 Hoop Wrap에 관한 이론 연구 (Theoretical Study on Hoop Wrap of the Metal Wire for Type 2 High Pressure Tank)

  • 김승환;한진목;정영관
    • 한국수소및신에너지학회논문집
    • /
    • 제31권2호
    • /
    • pp.194-201
    • /
    • 2020
  • Recently, Type 2 high-pressure hydrogen storage tank is studied due to fast defect detection, easy manufacturing, and cost efficiency. Moreover, the dry winding a high-strength metal wire will make increased economic efficiency compare with the wet winding method and the carbon/glass fiber winding method. In this study, a theoretical study on the dry winding of a Type 2 high pressure hydrogen tank using a metal wire was done, and the equations of the total stress on the aligned and the staggered winding for the hoop winding were derived, and the following results were obtained by using these equations. As the diameter of the metal wire, the number of winding layers, and the outer diameter of the liner increase, the maximum stress decreases, but the difference between the maximum stress occurring in the aligned winding and the staggered winding increases. As the pressure increases, the thickness of the winding layer increases, but as the strength of the metal wire increases, the thickness of the winding layer decreases. In addition, regardless of the strength of the metal wire, the thickness of the winding layer of the staggered winding was about 13.4% thinner than that of the aligned winding.

전기주석도금강판의 표면특성이 투피스캔 제관공정의 아이어닝 가공시 마찰특성에 미치는 영향 (Effects of surface characteristics of electrolytic tinplate on frictional properties during ironing operaration of 2-piece can-making process)

  • 김태엽
    • 한국표면공학회지
    • /
    • 제30권3호
    • /
    • pp.191-201
    • /
    • 1997
  • Non-passivated electrolytic tinplates withour conventinal chemical treatment self-oxidize in ambient atmosphere to from yellow stain on the outermost surface during the long-term storage. The degree of yellowness of the stain increased linerly with the oxide thickness due to the interfeefence color of the $SnO_2$ Even though the thickness of the oxide layer was very thin, less than 100$\AA$ , it exerts an undesirable influence on the can-making processes, particularly the stripping behavior after ironing. Investigations were carried out on the morphologies of the coating layer, the changes in oxide thickness during successive can-making processes and the averge friction coefficients with the different oxide thinkness. These oxide layers were broken up and distributed within the bulk tin coating during the ironing process. This redistribution of the oxide layer prvented smooth pressing-aside of the tin coating layer, resulting in an increase in the ironing friction coefficient. As the friction was increased, the residual stress along the can wall thinkness(i.e., the hoop stress) was also increased. Due to both the oxibe layer accumulation, which increased the friction coefficient, and the hoop stress, can stripping efficiency without roll-back is reduced.

  • PDF

핵연료 피복관용 다중층 SiC 복합체 튜브의 Hoop Stress 전산모사 연구 (FEA Study on Hoop Stress of Multilayered SiC Composite Tube for Nuclear Fuel Cladding)

  • 이현근;김대종;박지연;김원주
    • 한국세라믹학회지
    • /
    • 제51권5호
    • /
    • pp.435-441
    • /
    • 2014
  • Silicon carbide-based ceramics and their composites have been studied for application to fusion and advanced fission energy systems. For fission reactors, $SiC_f$/SiC composites can be applied to core structural materials. Multilayered SiC composite fuel cladding, owing to its superior high temperature strength and low hydrogen generation under severe accident conditions, is a candidate for the replacement of zirconium alloy cladding. The SiC composite cladding has to retain its mechanical properties and original structure under the inner pressure caused by fission products; as such it can be applied as a cladding in fission reactor. A hoop strength test using an expandable polyurethane plug was designed in order to evaluate the mechanical properties of the fuel cladding. In this paper, a hoop strength test of the multilayered SiC composite tube for nuclear fuel cladding was simulated using FEA. The stress caused by the plug was distributed nonuniformly because of the friction coefficient difference between the inner surface of the tube and the plug. Hoop stress and shear stress at the tube was evaluated and the relationship between the concentrated stress at the inner layer of the tube and the fracture behavior of the tube was investigated.

탄성지반상에 놓인 철근콘크리트 축대칭 쉘의 정적 및 동적 해석 (III) -비선형 정적거동을 중심으로- (Static and Dynamic Analysis of Reinforced Concrete Axisymmetric Shell on the Elastic Foundation -With Application to an Static Behavior Analysis of Axisymmetric Shell-)

  • 조진구
    • 한국농공학회지
    • /
    • 제39권3호
    • /
    • pp.72-82
    • /
    • 1997
  • In all inelastic deformations time rate effects are always present to some degree. Whether or not their exclusion has a significant influence on the prediction of the material behaviour depends upon several factors. In the study of structural components under static loading conditions at normal temperature it is accepted that time rate effects are generally not important. However metals, especially under high temperatures, exhibit simultaneously the phenomena of creep and viscoplasticity. In this study, elastoplastic and elasto-viscoplastic models include nonlinear geometrical effects were developed and several numerical examples are also included to verify the computer programming work developed here in this work. Comparisons of the calculated results, for the elasto-viscoplastic analysis of an internally pressurised thick cylinder under plane strain condition, have shown that the model yields excellent results. The results obtained from the numerical examples for an elasto-viscoplastic analysis of the Nuclear Reinforced Concrete Containment Structure(NRCCS) subjected to an incrementally applied internal pressure were summarized as follows : 1. The steady state hoop stress distribution along the shell layer of dome and dome wall junction part of NRCCS were linearly behave and the stress in interior surfaces was larger than that in exterior. 2.However in the upper part of the wall of NRCCS the steady state hoop stress in creased linearly from its inner to outer surfaces, being the exact reverse to the previous case of dome/dome-wall junction part. 3.At the lower part of wall of NRCCS, the linear change of steady state hoop stress along its wall layer began to disturb above a certain level of load increase.

  • PDF

다층구조물내의 탄성파 전파해석 (An Analysis of Elastic Wave Propagation in Multilayered Media)

  • 김현실
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 1999년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
    • /
    • pp.143-150
    • /
    • 1999
  • Elastic wave propagation in a multilayered elastic half-plane is studied by using the Cagniard-de Hoop method. After the unknowns are expressed in terms of the reflection and transmission coefficients in the in terms of the reflection and transmission coefficients in the integral-transformed domains they are assmbled to form the global matrix equation. The inverse Laplace transform of each term is done by applying the Cagniard-de Hoop methods. As a numerical example a four-layered half-plane is considered where a point source is applied to the first layer. The method described in the present study can be used in checking other numerical methods such as FDM.

  • PDF

마이크로 유전자 알고리즘을 이용한 외부 수압을 받는 필라멘트 와인딩 복합재 원통의 최적 설계 (Optimal Design of Filament Wound Composite Cylinders under External Hydrostatic Pressure using a Micro-Genetic Algorithm)

  • 문철진;권진회;최진호
    • Composites Research
    • /
    • 제23권4호
    • /
    • pp.14-20
    • /
    • 2010
  • 본 연구에서는 마이크로 유전자 알고리즘을 이용하여 외부 수압을 받는 필라멘트 와인딩 복합재 원통의 최적설계를 수행하였다. 목적함수는 파손하중과 좌굴하중을 동시에 고려하여 설계하중을 최대화하는 것이다. 좌굴 및 파손해석은 MSC.NASTRAN을 이용하였고, Carroll의 공개된 마이크로 유전자 알고리즘에 기초한 최적화작업을 수행하였다. 설계변수로는 헬리컬(helical) 와인딩 각도와 후프(hoop) 와인딩 층의 두께비가 고려되었다. 본 연구를 통해 마이크로 유전자 알고리즘을 이용하여 다양한 형상을 갖는 필라멘트 와인딩 복합재 원통의 좌굴 및 파손하중 최적화가 가능함을 확인하였고, 제안된 알고리즘이 일반 유전자 알고리즘과 비교해서도 높은 효율을 보였다.

복합재 압력용기의 성능지수 최대화를 위한 적층 설계변수 연구 (Research on Laminate Design Parameters to Maximize Performance Index of Composite Pressure Vessel)

  • 정승민;황태경
    • 한국추진공학회지
    • /
    • 제22권3호
    • /
    • pp.21-27
    • /
    • 2018
  • 본 연구에서는 복합재 압력용기의 성능지수를 최대화하기 위한 적층 설계변수의 영향도 평가 및 최적설계를 수행하였다. 성능지수를 최대화하기 위하여 압력용기의 내부체적이 고정되어 있다는 가정 하에 헬리컬 및 후프 층의 두께와 후프 층의 길이, 총 세 가지 변수를 고려하였다. 선정된 변수들의 최적화를 위하여 대체모델의 구축에 필요한 반응표면법이 도입되었고, 변수의 영향도를 평가하기 위한 분산분석이 수행되었다. 최적설계 문제는 내압성능 제약조건 하에 성능지수를 최대화하는 문제로 정식화하였다. 도출된 최적화 모델에 대한 추가적인 수치해석을 통해 본 연구의 효용성을 입증하였다.

Dry storage of spent nuclear fuel and high active waste in Germany-Current situation and technical aspects on inventories integrity for a prolonged storage time

  • Spykman, Gerold
    • Nuclear Engineering and Technology
    • /
    • 제50권2호
    • /
    • pp.313-317
    • /
    • 2018
  • Licenses for the storage of spent nuclear fuel (SNF) and vitrified highly active waste in casks under dry conditions are limited to 40 years and have to be renewed for prolonged storage periods. If such a license renewal has to be expected since as in accordance with the new site selection procedure a final repository for spent fuel in Germany will not be available before the year 2050. For transport and possible unloading and loading in new casks for final storage, the integrity and the maintenance of the geometry of the cask's inventory is essential because the SNF rod cladding and the cladding of the vitrified highly active waste are stipulated as a barrier in the storage concept. For SNF, the cladding integrity is ensured currently by limiting the hoop stress and hoop strain as well as the maximum temperature to certain values for a 40-year storage period. For a prolonged storage period, other cladding degradation mechanisms such as inner and outer oxide layer formation, hydrogen pick up, irradiation damages in cladding material crystal structure, helium production from alpha decay, and long-term fission gas release may become leading effects driving degradation mechanisms that have to be discussed.