• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.278-278
• /
• 2022

Recently, the yield potential of high yield Tongil-type rice varieties has greatly increased, reaching 817kg/10a(Geumgang No.1). Moreover, in order to promote rice consumption and strengthen the competitiveness of the rice processing industry, the R&D of high yield Tongil-type rice varieties for each processing purpose, such as rice noodles, grain feed and industrial materials, has been continuously carried out. However, because Tongil-type rice varieties or lines are generally very vulnerable to cold damage, cold tolerance test can be said to be absolutely necessary to improve the cultivation safety. This study is the result of the seedling and field cold tolerance characteristic tests carried out in 2021 of high yield Tongil-type rice breeding lines. For the cold tolerance characteristic test of seedlings, total 303 high yield rice breeding lines for processing were treated in cold water of 13℃ and irrigation depth of 4cm for 10 days from the third-leaf age, then it was evaluated by comparing the degree of discoloration and withering with the checked varieties(Boramchan, Hanahreum No.2). Also, for the test of field, total 186 high yield rice breeding lines for processing were treated in cold water of 17℃ by keeping pouring day and night from 30 days after transplanting to ripening stage, then it was evaluated by comparing the degree of discoloration, delay of heading, shortening rate of stem length and percent of fertile grain etc. with the checked varieties. And the cold tolerance evaluative criteria were classified as strong(1~3), medium(4~6) and weak(7~9) in overall cold tolerance. (Seedling test) As for the degree of cold tolerance of the check variety, 'Boramchan' and 'Hanahreum No.2' showed a response of 'medium' and 'weak', respectively. However, there was no 'strong' line in the high yield rice breeding lines, 2 lines showed a 'medium' response, and 301 lines showed a 'weak' response. Therefore, except for a few lines(0.7%), most lines(99.3%) showed a 'weak' response. (Field test) In terms of the overall cold tolerance of the check variety, both 'Boramchan' and 'Hanahreum No.2' showed a 'medium' response. Similarly, there was no 'strong' line in the case of high yield rice breeding lines, 20 lines showed a 'medium' response, and 166 lines showed a 'weak' response. Therefore, except for some(10.8%) lines, most(89.2%) lines showed a 'weak' response. From the above results, we selected about 100 individuals with less seed shattering and degeneration of the ear tip, and with a relatively high percent of fertile grain, and are continuing to select lines with improved cold tolerance in the F4~F5 group in this year. As such, most of the Tongil-type rice varieties have poor cold tolerance and thus have low cultivation safety at low temperatures. However, it is important to select improved lines through generational progress because there are some lines that still have a certain level of cold tolerance among them.

• Journal of Drive and Control
• /
• v.21 no.2
• /
• pp.36-43
• /
• 2024

The yield is basic and necessary information in precision agriculture that reduces input resources and enhances productivity. Yield information is important because it can be used to set up farming plans and evaluate farming results. Yield monitoring systems are commercialized in the United States and Japan but not in Korea. Therefore, such a system must be developed. This study was conducted to develop a yield monitoring system that improved performance by correcting a previously developed flow sensor using a grain tank-weighing system. An impact-plated type flow sensor was installed in a grain tank where grains are placed, and grain tank-weighing sensors were installed under the grain tank to estimate the weight of the grain inside the tank. The grain flow rate and grain weight prediction models showed high correlations, with coefficient of determinations (R2) of 0.9979 and 0.9991, respectively. A main controller of the yield monitoring system that calculated the real-time yield using a sensor output value was also developed and installed in a combine harvester. Field tests of the combine harvester yield monitoring system were conducted in a rice paddy field. The developed yield monitoring system showed high accuracy with an error of 0.13%. Therefore, the newly developed yield monitoring system can be used to predict grain weight with high accuracy.

• Industrial Engineering and Management Systems
• /
• v.4 no.2
• /
• pp.158-164
• /
• 2005

Kusukawa and Ohta presented the $CS_{CQ-r}$ chart to monitor the process defect $rate{\lambda}$ in high-yield processes that is derived from the count of defects. The $CS_{CQ-r}$ chart is more sensitive to $monitor{\lambda}$ than the CQ (Cumulative Quantity) chart proposed by Chan et al.. As a more superior chart in high-yield processes, we propose a Synthetic chart that is the integration of the CQ_-r chart and the $CS_{CQ-r}$chart. The quality characteristic of both charts is the number of units y required to observe r $({\geq}2)$ defects. It is assumed that this quantity is an Erlang random variable from the property that the quality characteristic of the CQ chart follows the exponential distribution. In use of the proposed Synthetic chart, the process is initially judged as either in-control or out-of-control by using the $CS_{CQ-r}$chart. If the process was not judged as in-control by the $CS_{CQ-r}$chart, the process is successively judged by using the $CQ_{-r}$chart to confirm the judgment of the $CS_{CQ-r}$chart. Through comparisons of ARL (Average Run Length), the proposed Synthetic chart is more superior to monitor the process defect rate in high-yield processes to the stand-alone $CS_{CQ-r}$ chart.

• Journal of Korean Society of Forest Science
• /
• v.57 no.1
• /
• pp.14-19
• /
• 1982

Fines in high-yield sulfite pulp have much higher water retention value as compared with fines in Stone groundwood pulp. Therefore, they are apt to adhere partially or entirely onto the fiber surface during the paper making. This tendency is greatly enhance with decrease of the pretreated yield and increase of the water retention value of fines. Fines, which adhere onto the fiber surface in paper, contribute to the light scattering of the paper. Accordingly, the specific scattering coefficient of fines in high-yield sulfite pulp is considerably lower than that of fines in stone groundwood pulp, which hardly adhere onto the fiber surface. The fact that high-yield sulfite pulp is inferior to stone groundwood pulp in opacity is explained on the basis of the high degree of swelling of fined in addition to the softening of fiber fraction.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.10 no.1
• /
• pp.1-9
• /
• 1990

Tillering of orchardgrass during establishment year was considered as an important factor for ground cover and forage yield. Field experiment was conducted to examine seasonal fluctuation of tiller number in three cultivars of orchardgrass; Potomac, Hall-mark, and Sumas, after transplanting with five planting density. Also, effects of plant density and nitrogen application in cultivar, Potomac were studied on tillering, forage yield and various growth characteristics in pot experiment Tillers per plant decreased with increased density and showed seasonal variations. It increased up to July, decreased during summer months, and increased again from October. Sumas had less tillers than other cultivars, especially at high density. Tillers per unit area kept high during spring. After then, there was stady decrease through summer and remained constant without affecting by planting density. Nitrogen application increased tillers per unit area in Potomac up to 20kg/10a, but decreased its tiller production at 40kg/lOa. Maximum number of tiller was obtained in the combinations of 20kg application of nitrogen with higher density than 324 plant per square meter. Forage yield increased as nitrogen application increased, while it did not respond to plant density. Forage yield had high linear correlation between LAI, leaf number with a peak at 2800 culrns. For high forage yielding, it was suggested to obtain optimum number of tillers per unit area in early season as possible, applying of adequate amount of nitrogen with relative high density depend on cultural condition.

• Korean Journal of Metals and Materials
• /
• v.48 no.7
• /
• pp.598-604
• /
• 2010

Tensile tests are widely used for evaluating mechanical properties of materials including flow curves as well as Young's modulus, yield strength, tensile strength, and yield point elongation. This research aims at analyzing the plastic flow behavior of high strength steels for automotive bodies using the finite element method in conjunction with the viscoplastic model considering the yield point elongation phenomenon. The plastic flow behavior of the high strength steel was successfully predicted, by considering an operating deformation mechanism, in terms of normalization dislocation density, and strain hardening and accumulative damage of high strength steel using the modified constitutive model. In addition, the finite element method is employed to track the properties of the high strength steel pertaining to the deformation histories in a skin pass mill process.

• Plant Resources
• /
• v.8 no.1
• /
• pp.9-12
• /
• 2005

TO select the most suitable crop and variety of forage for productivity at the southern part of Korea, The crops of wheat, barley and rye were grown from Oct. 1999 to June 2000. Paldanghomil variety of rye crop was shown to have the highest productivity in comparison to other varieties of crops used in this experiment. It showed relatively high plant height, number of tiller, forage yield and dry matter yield. There fore, it was concluded that Paldanghomil of rye crop was the most suitable crop with high yield in the southern part of Korea. The heritabilities of all characters were estimated to be high.

• Journal of Environmental Science International
• /
• v.24 no.6
• /
• pp.769-776
• /
• 2015

This study was conducted to determine the effects of high temperature and deficit irrigation on growth and yield of hot pepper. Hot pepper was subjected to four irrigation treatments: fully irrigation (FI), 10, 20, and 30 days deficit irrigation (DI) combination with high temperature treatment. Control plants were grown natural environment and conventional culture methods. The plant height treated with high temperature was significantly higher than that of control plant. At FI combination with high temperature treatment, growth parameters such as stem diameter, leaf area, fresh and dry weight were the greatest. The yield was the greatest (2,036 kg/10a) under control, DI combination with high temperature treatment decreased by approximately 42% compare with FI combination with high temperature treatment. The number of abnormal fruits was approximately 38/plant under control, which was the smallest and that of 30 days DI combination with high temperature was higher 3.3 times compare with control. Flower abscission and calcium deficiency induced by DI treatments, especially those physiological disorder promoted by increasing DI treatments period. Results indicated that yield of hot pepper reduced by DI treatments, these results suggest that the growers should irrigate to proper soil moisture for preventing reduction of total fruit yield.

• Korean Journal of Breeding Science
• /
• v.40 no.4
• /
• pp.371-376
• /
• 2008

For the purpose of breeding a high-yield superior variety of Korean raisin tree (Hovenia dulcis var. koreana Nakai), whose value as an edible and medicinal resource is increasing, tree candidates for superior individuals were selected from its 11 habitats in Korea from 1996 to 1998. A clone bank preserve was created in 1998 with 70 clones proliferated by grafting; the fruition traits (e.g., the number of fructified laterals, the average number of bunches per fructified lateral, the average number of bunches per fruiting lateral, the fruitpetiole weight per individual, and the yield per individual) of 47 clones that had bloomed and borne fruit were investigated and analyzed in 2002; five upper-ranking clones whose yield per individual exhibited a 261% improvement against the total average were picked in 2005; and three clones, including 'Poong-Sung 1', that showed a difference in their fruit petiole ripening stage, were finally selected in 2007 as high-yield new cultivars of Korean raisin tree.

• Korean Journal of Organic Agriculture
• /
• v.24 no.4
• /
• pp.957-967
• /
• 2016

The present study was conducted to investigate effect of dietary protected amino acid on milk yield and composition in dairy cow using meta-analysis. Total 21 research papers were employed in analysis, and mixed model was used for the analysis of effects. Effect of protected methionine (PM) and combination of protected methionine and lysine (PML) were investigated under two different levels of dietary crude protein (CP, <18% and >18%). For performance of dairy cow, milk yield, milk composition including milk fat and protein content and yield and 4% FCM (fat corrected milk) production were used for analysis. In case of milk yield, a trend of increment was found at PM supplementation at low CP (P=0.055). However, the effect of PM at high CP was detected as not significant (P>0.05). In case of milk protein, inclusion of PM at low CP showed significant decrement (P<0.05). However, there was no significant effect of MP on milk protein at high CP (P>0.05). Supplementation of MP at high CP level showed significant increment of milk fat (P<0.05). MP supplementation represented significant increment of 4% FCM production (P<0.05) regardless of dietary CP levels. Effects of PML on milk yield and composition at both of low and high dietary CP were not significant in this study. However, it seem to be that there was a possible positive effect of MPL application at high dietary CP on performance of dairy cow.