• Journal of the Korean Society of Safety
• /
• v.25 no.3
• /
• pp.34-39
• /
• 2010

Unidirectional Carbon Fiber Reinforced Plastics (CFRP) are advanced materials which combine the characteristics of the light weight, high stiffness and strength. For those reasons, the use of the unidirectional CFRP has increased in jet fighters, aerospace structures. However, unidirectional CFRP composites have a lot of problems, especially delamination, compared with traditional materials such as steels and aluminums, and so forth. Therefore, the interlaminar fracture toughness for a laminate CFRP composite is very important. In this study, The mode II interlaminar fracture toughness was measured by using center notched flexure(CNF) test specimen. The CNF specimens using unidirectional carbon prepreg were fabricated by a hot-press with the gage pressure and temperature controller. And three kinds of a/L ratio was applied to these specimens. Here, we discuss the relations of the crack growth and the mode II interlaminar fracture under the four point bending CNF test. From the results, we shows that mode II interlaminar was occurred when the more $a_0$/L ratio, the less load. And $G_{IIC}$ also were obtained as 5.33, 2.9 and $0.58kJ/m^2$ according to $a_0$/L ratio=0.2, 0.3 and 0.4.

• Journal of the Korean Society for Heat Treatment
• /
• v.20 no.5
• /
• pp.237-242
• /
• 2007

Friction coefficient of SM45C steel was surprisingly reduced with $H_2S$ and $C_3H_8$ gas during plasma sulf-nitriding. During the plasma sulf-nitriding, 100-700 sccm of $H_2S$ gas and 100 sccm of $C_3H_8$ gas were added and working pressure and temperature were 2 torr, $500-550^{\circ}C$, respectively. As $H_2S$ gas amount increased over 500 sccm, flake-like structures were developed on top of the nitriding layer and grain size of the nitriding layer were about 100 nm. The friction coefficient for the sample treated plasma sulf-nitriding under $N_2-H_2S$ gas was 0.4 - 0.5. The structure became more finer and amorphous-like along with $N_2-H_2S-C_3H_8$ gas and the nano-sized surface microstructures resulted in high hardness and significantly low friction coefficient of 0.2.

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.2
• /
• pp.213-222
• /
• 2001

Cylindrical type ceramic filers, that is 60 O.D$\times$10t$\times$600L and 60 O.D$\times$10t$\times$1,000L were manufactured by vacuum forming processes using ceramic ray materials. For cylindrical type ceramic filters, porosity and bulk density were measured for, 80 to 90% and 0.3 to 0.4 g/㎤, respectively at uniform pore size of 41 to 45${\mu}{\textrm}{m}$. Bench scale candle filters (60$\psi$ $\times$10t$\times$600L) were tested using different dusts collected from many industries including chemical processing, glass processing and metal manufacturing pants. Collection efficiencies found out to range from 99.87% to 99.90%, while resistance coefficients from 1.1$\times$10(sup)11/$m^2$ to 1.7$\times$10(sup)11/$m^2$ . Full scale low density ceramic filters (60$\psi$ $\times$10t$\times$1,000L) were also tested at 1 atm, $600^{\circ}C$ to reveal the filtration efficiency, conditioning, and resistance coefficients using two different types of dust as chemical processing and metal refined processing. Darcys law resistance coefficients were measured to range 1.44$\times$10(sup)11/$m^2$ to 2.74$\times$10(sup)11/$m^2$, and collection efficiencies on the range 99.84 to 99.96%, Finally, results of long term performance test showed that filters were conditioned after 170hrs. Experimental conditions for effective filtration were examined under the condition 10 cm/sec face velocity, 3kg/$\textrm{cm}^2$ pulsing pressure, 5 min filtration cycle, and 300msec pulse opening time.

• Women's Health Nursing
• /
• v.8 no.1
• /
• pp.34-54
• /
• 2002

This study was conducted to assess the knowledge and educational need of pregnant women relating to antepartum, delivery, puerperium period and to identify the variables which influenced their knowledge and educational need. The study subjects were 77 antepartum women who had antenatal educations and 106 antepartum women who did not have antenatal education. Number of total antepartum women were 183. Data were collected from women who visited for antenatal care at general hospitals and public health centers in Pusan and Kyungnam area using qestionnaires from Feb. 1. 1998 to Apr. 20. 1998. SAS/PC program was used for data analysis. ; Chi-square test, t-test, Pearson's Correlation Coefficient, ANOVA(Duncan procedure) and MANOVA. The results of this study were as follows: 1. Relating to the antepartum period between two groups, the knowledge about the number of antenatal care was low, relating to labor the knowledge about the time fix the fetal position and relating to postpartum, the knowledge about the change of blood pressure and body temperature was low. 2. The comparision means of knowledge were adjusted by social demographic characteristics related to knowledge. There were statistically significant differences in total mean score of knowledge about pregnancy, delivery and postpartum between two groups. In full marks 19, the mean scores of the educational group and non-educational group were 13.08 and 11.74 respectively (P=.000). In resultly, there are statistically significant differences between two groups. The effectiveness of antenatal education group was very high and showed its importance. 3. The comparision means of educational need were adjusted by social demographic characteristics related to educational need. The mean scores of educational need were statistically significantly different in pregnancy, delivery and puerperium period. 4. There were positive correlations between the knowledge and educational level, duration of marriage and total numbers of pregnancy. There were negative correlation between the educational need and age, educational level, duration of marriage and total number of pregnancy. The above results showed the effects of antenatal education.

• Journal of Powder Materials
• /
• v.27 no.2
• /
• pp.139-145
• /
• 2020

The powder manufacturing process using the gas atomizer process is easy for mass production, has a fine powder particle size, and has excellent mechanical properties compared to the existing casting process, so it can be applied to various industries such as automobiles, electronic devices, aviation, and 3D printers. In this study, a modified A4032-xSn (x = 0, 1, 3, 5, and 10 wt.%) alloy with low melting point properties is investigated. After maintaining an argon (Ar) gas atmosphere, the main crucible is tilted; containing molten metal at 1,000℃ by melting the master alloy at a high frequency, and Ar gas is sprayed at 10 bar gas pressure after the molten metal inflow to the tundish crucible, which is maintained at 800℃. The manufactured powder is measured using a particle size analyzer, and FESEM is used to observe the shape and surface of the alloy powder. DSC is performed to investigate the change in shape, according to the melting point and temperature change. The microstructure of added tin (Sn) was observed by heat treatment at 575℃ for 10 min. As the content of Sn increased, the volume fraction increased to 1.1, 3.1, 6.4, and 10.9%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1284-1288
• /
• 2008

Recently, there is increasing the development requirement of middleware and interface for GPS(Global Positioning System), RFID(Radio Frequency IDentification), sensor networks. GPS supports a useful location based service. RFID supports products logistic and distribution services through the identification. A sensor network collects a context information, such as humidity, temperature and atmospheric pressure. This paper implements and verifies a integrated service middleware for supporting efficiently process of sensing data collected from RFID, GPS and sensor network. This middleware have the temporary store function, the redundancy exclusion function, certification function, the classification function and the database storage function. Additionary, this middleware connects with low-level adaptor using socket interface and supports the high-level application services using database connection. Therefore, user can develop easily various many ubiquitous application system using proposed middleware instead of each RFID middleware, GPS middleware and, middleware based on sensor network.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.3
• /
• pp.394-404
• /
• 2015

This study investigated the pharmacodynamics of betaine on the blood profile and short chain fatty acid levels in meat ducks exposed to heat wave. 400 heads of Cherry valley (Anasplatyrhynchos) meat ducks were completely randomized to 5 treatments (4 repetitions each), and were raised for 42 days. They were grouped into T1 (heat wave control group without betaine), T2 (betaine 400 ppm), T3 (betaine 800 ppm), T4 (betaine 1200 ppm), and T5 (normal control group without betaine). Compared to T1, the betaine addition groups showed higher body weight gain at shipment, with T3 showing the highest significant difference. For hematological indictors measured (red blood cells and platelets), the betaine addition groups showed significantly higher values than the heat wave control group. The pH of the former was lower but their electrolytes ($K^+$, $P^+$, and $Cl^-$) were significantly higher compared to the latter. For blood gas concentration, the former showed a significantly higher value than the latter. For the total short chain fatty acids, acetic acid, and propionic acid, the betaine addition groups and group fed broiler-high temperature diet showed higher values than the heat wave control group. On the other hand, the former showed significantly lower values in butyric acid, isobutyric acid, valeric acid, and isovaleric acid than the latter group. These results suggest that betaine has the pharmacodynamics that mediate heat stress, via the maintenance and control of the blood profile, osmotic pressure, gas concentration, and short chain fatty acid, of meat ducks under heat wave.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.524-527
• /
• 2007

[ $Bi_2Sr_2Ca_{n-1}Cu_nO_x$ ](n=0, 1, 2) thin films have been fabricated by co-deposition at an ultra-low growth rate using ion beam sputtering(IBS) method. Bi 2212 phase appeared in the temperature range of 750 and $795^{\circ}C$ and single phase of Bi 2201 existed in the lower region than $785^{\circ}C$. Whereas, $PO_3$ dependance on structural formation was scarcely observed regardless of the pressure variation. And high quality of c-axis oriented Bi 2212 thin film with $T_c$(onset) of about % K and $T_c$(zero) of about 45 K is obtained. Only a small amount of CuO in some films was observed as impurity, and no impurity phase such as $ CaCuO_2$ was observed in all of the obtained films.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.10
• /
• pp.1495-1499
• /
• 2020

The study of climate and respiratory viral infections using big data may enable the recognition and interpretation of relationships between disease occurrence and climatic variables. In this study, real-time reverse transcription quantitative PCR (qPCR) methods were used to identify Human respiratory coronaviruses (HCoV). infections in patients below 10 years of age with respiratory infections who visited Dankook University Hospital in Cheonan, South Korea, from January 1, 2012, to December 31, 2018. Out of the 9010 patients who underwent respiratory virus real-time reverse transcription qPCR test, 364 tested positive for HCoV infections. Among these 364 patients, 72.8% (n = 265) were below 10 years of age. Data regarding the frequency of infections was used to uncover the seasonal pattern of the two viral strains, which was then compared with local meteorological data for the same time period. HCoV-229E and HCoV-OC43 showed high infection rates in patients below 10 years of age. There was a negative relationship between HCoV-229E and HCoV-OC43 infections with air temperature and wind-chill temperatures. Both HCoV-229E and HCoV-OC43 rates of infection were positively related to atmospheric pressure, while HCoV-229E was also positively associated with particulate matter concentrations. Our results suggest that climatic variables affect the rate in which children below 10 years of age are infected with HCoV. These findings may help to predict when prevention strategies may be most effective.

• Journal of Advanced Navigation Technology
• /
• v.20 no.1
• /
• pp.29-36
• /
• 2016

Accuracy of GPS (global positioning system) deteriorates dramatically or positioning is impossible in urban area occasionally since high-rise buildings and elevated roads make the reception of navigation signal very difficult so that number of visible satellites decreases. In these cases, vertical error usually becomes much larger than the horizontal error due to the intrinsic geometry of GPS satellites. To obtain more accurate and reliable height information, this paper proposes a hybrid method that combines GPS and a low-cost barometric altimeter. In the proposed method, the sea-level pressure and the sea-surface temperature are applied to the output of the altimeter. Next, the difference between the ellipsoid and the geoid is compensated. Finally, a simple Kalman filter combines the compensated barometric altitude and the GPS height. By static and car experiments, performance of the proposed method is evaluated. By the experiment results, it can be seen that the proposed method improves the altitude accuracy considerably.