• Bulletin of the Korean Space Science Society
• /
• 2010.04a
• /
• pp.40.3-40.3
• /
• 2010

The most frequently suggested source for Pi2 pulsations in the inner magnetosphere (L < 4) is standing fast-mode waves trapped in the plasmasphere (i.e., plasmaspheric resonances). They have been considered as the source of low-latitude Pi2 pulsations. The plasmaspheric resonance model suggests that compressional fast-mode waves can be detected at all local times inside the plasmasphere provided reflection of the wave energy is efficient. Until now, however, there are no reports about compressional Pi2s observed in the dayside inner magnetosphere. That is, there is longitudinal limit of inner magnetosphere. In February 2008, THEMIS probes were near dawn and/or dusk sides, which are the transition regions between the nightside and dayside, in the inner magnetosphere (L = 2-4) when low-altitude Pi2s were identified at Bohyun (L = 1.35) station in Korea. Using the THEMIS electric field data, we examined if Pi2s are excited by longitudinally localized disturbances. We found that compressional Pi2s having high coherence with a low-latitude Pi2 pulsation occur on dawnside. However, any compressional pulsations in the Pi2 frequency band were not detected on duskside. This indicates that compressional Pi2s disappear near the duskside. Our observations are discussed with spatial plasmaspheric structure and possible Pi2 mechanisms.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.3
• /
• pp.246-251
• /
• 2013

Screen printing is commonly used to form the front/back electrodes in silicon solar cell. But it has caused high resistance and low aspect ratio, resulting in decreased conversion efficiency in solar cell. Recently the plating method has been combined with screen-printed c-Si solar cell to reduce the resistance and improve the aspect ratio. In this paper, we investigated the effect of light induced silver plating with screen-printed c-Si solar cells and compared their electrical properties. All wafers were textured, doped, and coated with anti-reflection layer. The metallization process was carried out with screen-printing, followed by co-fired. Then we performed light induced Ag plating by changing the plating time in the range of 20 sec~5min with/without external light. For comparison, we measured the light I-V characteristics and electrode width by optical microscope. During plating, silver ions fill the porous structure established in rapid silver particle sintering during co-firing step, which results in resistance decrease and efficiency improvement. The plating rate was increased in presence of light lamp, resulting in widening the electrode with and reducing the short-circuit current by shadowing loss. With the optimized plating condition, the conversion efficiency of solar cells was increased by 0.4% due to decreased series resistance. Finally we obtained the short-circuit current of 8.66 A, open-circuit voltage of 0.632 V, fill factor of 78.2%, and efficiency of 17.8% on a silicon solar cell.

• Journal of the Korean Vacuum Society
• /
• v.7 no.2
• /
• pp.77-81
• /
• 1998

The eptiaxial growth of Ge on the clean and surfactant (Sn) adsorbed surface of Ge(111) was studied by the intensity oscillation of a RHEED specular spot. In the case of epitaxial growth without the adsorbed surfactant, the RHEED intensity oscillation was stable and periodic up to 24 ML at the substrate temperature of $200^{\circ}C$. Therefore the optimum temperature for the epitaxial growth of Ge on clean Ge(111) seems to be $200^{\circ}C$. However, in the case of epitaxial growth with the adsorbed surfactant, the irregular oscillations are observed in the early stage of the growth. The RHEED intensity osicillation was very stable and periodic up to 38 ML, and the d2$\times$2 structure was not charged with continued adsorption of Ge at the substrate temperature of 2002$\times$2. These results may be explained by the fact that the diffusion length of Ge atoms is increased by decreasing the activation energy of the Ge surface diffusion, resulted by segregation of Sn toward the growing surface.

• Journal of the Korean Vacuum Society
• /
• v.12 no.4
• /
• pp.275-280
• /
• 2003

Epitaxial Gd$_2O_3:Eu^{3+}$luminescent thin films have been grout on Si(III) substrates using ionized Cluster Beam Deposition (ICBD). After the film growing, they were implanted and post annealed to change the crystal structure. The initial growth stage was monitored by using in-situ Reflection High Energy Electron Diffraction (RHEED). The formed crystal structure was identified with X-ray diffraction (XRD) technique and Fourier transform infrared (FT-R) spectroscopy. The electronic states variations were investigated by Near Edge X-ray Absorption Fine Structure (NEXAFS). Photoluminescence (PL), Cathodoluminescence (CL). and Vacuum ultraviolet (VUV) spectrum were used for examining the optical properties. We report the optical property changes depending on crystal structure and the electronic states.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.149-149
• /
• 2010

The double-layer antireflection (DLAR) coatings have significant advantages over single-layer antireflection (SLAR) coatings. This is because they will be able to cover a broad range of the solar spectrum which would enhance the overall performance of solar cells. Moreover films deposited at high frequency are expected to show excellent and UV-stable passivation in the refractive index that we adopted. In this work, we present a novel DLAR coating using SiNx:H thin films with refractive indices 1.9 and 2.3 as the top and bottom layers. This approach is cost effective when compared to earlier DLAR coatings with two different materials. SiNx:H films were deposited by Plasma enhanced chemical vapor deposition (PECVD) technique using $SiH_4$, $NH_3$ and $N_2$ gases with flow rates 20~80sccm, 200sccm and 85 sccm respectively. The RF power, plasma frequency and substrate temperature for the deposition were 300W, 13.56 MHz and $450^{\circ}C$, respectively. The optimum thickness and refractive indices values for DLAR coatings were estimated theoretically using Macleod simulation software as 82.24 nm for 1.9 and 68.58 nm for 2.3 respectively. Solar cells were fabricated with SLAR and DLAR coatings of SiNx:H films and compared the cell efficacy. SiNx:H> films deposited at a substrate temperature of $450^{\circ}C$ and that at 300 W power showed best effective minority carrier lifetime around $50.8\;{\mu}s$. Average reflectance values of SLAR coatings with refractive indices 1.9, 2.05 and 2.3 were 10.1%, 9.66% and 9.33% respectively. In contrast, optimized DLAR coating showed a reflectance value as low as 8.98% in the wavelength range 300nm - 1100nm.

• Journal of the Korean Vacuum Society
• /
• v.19 no.6
• /
• pp.467-474
• /
• 2010

Packet propagation and absorption for the 28 GHz superconducting ECRIS under developing by KBSI Pusan center is analyzed with limited parameter range. The microwave power generated by 28 GHz gyrotron is axially injected to the plasma cavity through waveguide system. According to the analytical ray tracing calculation, the wave packet launched quasi-longitudinally at a high magnetic field side changes its direction from outward to inward as it is approaching resonance layer. Therefore, initially diverging wave does not likely hit a conducting surface before absorbing by electron cyclotron resonance. Also, absorption by plasma with moderate electron density is so strong that reflection by an extraction plate may not be expected.

• The Journal of Internal Korean Medicine
• /
• v.30 no.1
• /
• pp.173-180
• /
• 2009

Objectives : The aim of this study was to investigate the evaluation of gastrointestinal parasympathetic nerve activity by comparing between HRV and bowel sound parameters in patients with functional dyspepsia. Methods : 62 patients (male 22, female 40) were enrolled. HRV was measured in all patients. and TP (total power), LF (low frequency density: 0.04$\sim$0.15Hz), HF (high frequency density: 0.15$\sim$0.4Hz). and LF/HF ratio were analyzed. HF band is a reflection of parasympathetic activity. and the LF-to-HF ratio is considered a marker of sympathovagal balance. Bowel sounds were recorded at the day after, and postprandial %BS was used to indicate the gastric vagal activity after eating. HRV and bowel sound parameters were compared. and correlation between them was analyzed. Results : There was no difference in LF/HF ratio between patient group and healthy group of other report. According to values of %BS, each patient was classified into a normal (>6 %BS) or hypoactivity (<6 %BS) of gastric vagus nerve group. HF component of the hypoactivity group was not significantly higher than that of the normal group. There was no correlation between HRV and bowel sound parameters. Conclusions : Because no correlation was found between HRV and bowel sound parameters in patients with functional dyspepsia, we concluded that it is not proper to evaluate gastric vagus nerve activity by HRV measurement.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.1
• /
• pp.27-34
• /
• 2016

The type of ultrasound transducer used influences the quality of a reconstructed ultrasound image. This study analyzed the effect of transducer type on ultrasound computed tomography (UCT) image quality. The UCT was modeled in an ultrasound simulator by using a 5 cm anatomy model and a ring-shape 5 MHz 128 transducer array, which considered attenuation, refraction, and reflection. Speed-of-sound images were reconstructed by the Radon transform as the UCT image modality. Acoustic impedance images were also reconstructed by the delay-and-sum (DAS) method, which considered the speed of sound information. To determine the optimal combination of transducers in observation, point-source, flat, and focused transducers were tested in combination as trasmitters and receivers; UCT images were constructed from each combination. The combination of point-source/flat transducer as transmitting and receiving devices presented the best reconstructed image quality. In UCT implementation, the combination of a flat transducer for transmitting and a point transducer for receiving permitted acceptable image quality.

• Journal of Fashion Business
• /
• v.13 no.4
• /
• pp.60-76
• /
• 2009

Expression of woman characters in fusion traditional dramas plays a role of making the progress of dramas not bigoted and new. Especially, woman characters have a high weight as a heroine by an increase in their image in fusion traditional dramas. Expression of characters harmonizing modern with tradition has also given a help in reflecting a trend of the present times. Hair style and face makeup of woman characters in fusion traditional dramas are in the process of fusionization getting an effect from postmodernism. They are expressing the hair style of symbolization modern elements of hair style to traditional hair styles. They also expressed a neutral image with faded hair styles in the shaggy cut style and dye of neoplaticism. Neo-hippie style was changed into the style of naturalism and nationalism and the hair style braided in various branches as the one of Indians was changed into a primitive and national feature. It is producing a new style by permitting even a long-hair permanent wave hair style. Expression of straight hair style, a long-hair shaggy & bulging wave style and a hair style of neoplaticism, was distinguished. In the side of face makeup, they expressed its luxurious and splendid style by attaching great importance to its luster and are exposing images of characters by a smoky makeup emphasizing eye lines. Their face makeup was almost never separated from present dramas as using pearl shadow in a glossy lips makeup and color, which made it possible to express it more dramatically in fusion traditional dramas than in present dramas. In the event of the makeup element of fusion traditional dramas permitting diversity, the character makeup of fusion traditional dramas made a foundation to show people diverse elements of makeup by mix & match a present elements and past elements of historical research, which made it possible to express a unique makeup or a special makeup. Diverse makeup expressions were limited by reflection of illumination even in the existing videos. Therefore, 'Fusion' made it possible to express it more freely in fusion traditional dramas than in present dramas.

• The Journal of the Korea Contents Association
• /
• v.17 no.5
• /
• pp.529-539
• /
• 2017

The purpose of this study is to categorize and analyze the communication competency of engineering undergraduates and to develop educational content in order to improve that. In this study, communication competency of engineering undergraduates was categorized into three areas: critical thinking, scientific communication, and media literacy. As a means to improve communication competency, the experience with and perception of writing were investigated. The communication competency of undergraduates needs to be improved overall. There is a high need for writing programs that enhance critical thinking oriented around practice. It suggests flipped learning based on smart education, E-community, problem-solving programs based on action learning, cooperative learning programs, reflection journals & portfolio, and collaborative writing programs as educational content. The results of this study can be used as basic data to design competency-based communication curriculum and practical applications for engineering undergraduates.