• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.344-344
• /
• 2014

Transparent amorphous oxide semiconductors such as a In-Ga-Zn-O (a-IGZO) have advantages for large area electronic devices; e.g., uniform deposition at a large area, optical transparency, a smooth surface, and large electron mobility >10 cm2/Vs, which is more than an order of magnitude larger than that of hydrogen amorphous silicon (a-Si;H).1) Thin film transistors (TFTs) that employ amorphous oxide semiconductors such as ZnO, In-Ga-Zn-O, or Hf-In-Zn-O (HIZO) are currently subject of intensive study owing to their high potential for application in flat panel displays. The device fabrication process involves a series of thin film deposition and photolithographic patterning steps. In order to minimize contamination, the substrates usually undergo a cleaning procedure using deionized water, before and after the growth of thin films by sputtering methods. The devices structure were fabricated top-contact gate TFTs using the a-IGZO films on the plastic substrates. The channel width and length were 80 and 20 um, respectively. The source and drain electrode regions were defined by photolithography and wet etching process. The electrodes consisting of Ti(15 nm)/Al(120 nm)/Ti(15nm) trilayers were deposited by direct current sputtering. The 30 nm thickness active IGZO layer deposited by rf magnetron sputtering at room temperature. The deposition condition is as follows: a rf power 200 W, a pressure of 5 mtorr, 10% of oxygen [O2/(O2+Ar)=0.1], and room temperature. A 9-nm-thick Al2O3 layer was formed as a first, third gate insulator by ALD deposition. A 290-nm-thick SS6908 organic dielectrics formed as second gate insulator by spin-coating. The schematic structure of the IGZO TFT is top gate contact geometry device structure for typical TFTs fabricated in this study. Drain current (IDS) versus drain-source voltage (VDS) output characteristics curve of a IGZO TFTs fabricated using the 3-layer gate insulator on a plastic substrate and log(IDS)-gate voltage (VG) characteristics for typical IGZO TFTs. The TFTs device has a channel width (W) of $80{\mu}m$ and a channel length (L) of $20{\mu}m$. The IDS-VDS curves showed well-defined transistor characteristics with saturation effects at VG>-10 V and VDS>-20 V for the inkjet printing IGZO device. The carrier charge mobility was determined to be 15.18 cm^2 V-1s-1 with FET threshold voltage of -3 V and on/off current ratio 10^9.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.7176-7181
• /
• 2015

This thesis is about the system where the solar module is attached to the high functional guardrail posts with anti-weed, anti-plant, and road-kill applied to produce internal power, enabling the integrated control and real-time monitoring of appearance of wildlife and road conditions using the USN. The whole system consists of a photovoltaic module(PV), a detection sensor(pyroelectric), a controller(operation select and motion sensor), the USN system, the DB(sound and flash), an output unit of sound and flash, and the control system of road-kill prevention and safety induction for vehicles. Thus this study aims to address the remote control and monitoring system of multipurpose guardrails to improve road environment, prevent road-kills, protect wild animals, and guide cars safely by using the USN which is combined with new renewable energy and IT convergence technology. As a result of the study on the remote control and monitoring system using the USN, it was ascertained that the response time of the unmanned sensing system was within 5.1 ms with the current consumption of 0.328 mA, and the data transmission speed of the remote control system was 250 kbps with the current consumption of 0.283 mA.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.4
• /
• pp.283-296
• /
• 2008

The numerical simulations for groundwater flow were carried out to support the input parameters for safety assessment in LILW repository site. As the input parameters for safety assessment, the groundwater flux into the underground facilities during construction, flow rate through the disposal silo after closure of disposal silo and flow pathway from the disposal silo to discharge area were analyzed using the 10 cases groundwater flow simulations. From the total 10 numerical simulation results, the statistics of estimated output were similar to among 10 cases. In some cases, the analyzed input parameters were strongly governed by locally existed high permeable fracture zone at radioactive waste disposed depth. Indeed, numerical simulation for well scenario as a human intrusion scenario was carried out using the hydraulically severe case model. Using the results of well scenario, the input parameters for safety assessment were also obtained through the numerical simulation.

• The Journal of the Korea Contents Association
• /
• v.12 no.9
• /
• pp.172-181
• /
• 2012

The film industry is a high value-added industry, boosts the self-esteem of the people as a measure of a country's culture industry, and is one of the strategic industries to be fostered. However, the film industry is struggling due to the lack of national consensus on the importance and value of the film industry. Therefore, in order to resolve this issue, the study used the film Input-Output Table of year 2009 of korea to analyze how much the film industry contributes to the national economy. The results shows that film industry induce 82,838.7 billion won of national production, especially the film industry(the sector of film product & distribution and film screenings) shows that production inducement coefficient is 2.324(2.240, 2.478), Index of the power of dispersion is 1.163(1.121, 1.240), index of the sensitivity of dispersion is 0.825(0.825, 0.501), value-added coefficient is 0.884(0.479, 0.547), income inducement coefficient is 0.454(0.211, 0.236), tax inducement coefficient is 0.110(0.090, 0.146) and employment inducement coefficient is 0.017(0.014, 0.022).

• The Mathematical Education
• /
• v.27 no.1
• /
• pp.15-23
• /
• 1988

We are at the onset of a major revolution in education, a revolution unparalleled since the invention of the printing press. The computer will be the instrument of this revolution. Computers and computer application are everywhere these days. Everyone can't avoid the influence of the computer in today's world. The computer is no longer a magical, unfamiliar tool that is used only by researchers or scholars or scientists. The computer helps us do our jobs and even routine tasks more effectively and efficiently. More importantly, it gives us power never before available to solve complex problems. Mathematics instruction in secondary schools is frequently perceived to be more a amendable to the use of computers than are other areas of the school curriculum. This is based on the perception of mathematics as a subject with clearly defined objectives and outcomes that can be reliably measured by devices readily at hand or easily constructed by teachers or researchers. Because of this reason, the first large-scale computerized curriculum projects were in mathematics, and the first educational computer games were mathematics games. And now, the entire mathematics curriculum appears to be the first of the traditional school curriculum areas to be undergoing substantial trasformation because of computers. Recently, many research-Institutes of our country are going to study on computers in orders to use it in mathematics education, but the study is still start ing-step. In order to keep abreast of this trend necessity, and to enhance mathematics teaching/learning which is instructed lecture-based teaching/learning at the present time, this study aims to develop/present practical method of computer-using. This is devided into three methods. 1. Programming teaching/learning method This part is presented the following five types which can teach/learn the mathematical concepts and principle through concise program. (Type 1) Complete a program. (Type 2) Know the given program's content and predict the output. (Type 3) Write a program of the given flow-chart and solve the problem. (Type 4) Make an inference from an error message, find errors and correct them. (Type 5) Investigate complex mathematical fact through program and annotate a program. 2. Problem-solving teaching/learning method solving This part is illustrated how a computer can be used as a tool to help students solve realistic mathematical problems while simultaneously reinforcing their understanding of problem-solving processes. Here, four different problems are presented. For each problem, a four-stage problem-solving model of polya is given: Problem statement, Problem analysis, Computer program, and Looking back/Looking ahead. 3. CAI program teaching/learning method This part is developed/presented courseware of sine theorem section (Mathematics I for high school) in order to avail individualized learning or interactive learning with teacher. (Appendix I, II)

• Management & Information Systems Review
• /
• v.15
• /
• pp.109-145
• /
• 2004

Upcoming 21st century, Management circumstance for a small and medium enterprise have been rapidly changed by Knowledge management, Informationization, Hi-technology. Changing from an era of small concept to strong concept, It will be a severe innovation period and can not survive with life as the same as the past, It is the era of best which mean only the best can survive, None of the average faculty can survive. Due to rapid proceeding of innovation of Informationization, It stimulate acceleration of technology innovation, infinity competition regardless the nation boarder, result in proceeding to Informationization. A small and medium enterprise is defined as smaller size of business than big business as point of capital, employee, output. It is concept, which usually used against concept of big business. When define a small and medium enterprise, criteria to determine a small and medium enterprise is depends on country and a category of business. However, In every country, A small and medium enterprise is getting be bigger and importance factor in whole industry. A small and medium enterprise is well developed and also well balanced with a large enterprise in the developed country. All around in the world, Interest about a small and medium enterprise is becoming higher. It is actively researching into a small and medium enterprise as the mean to create new employment, new industry, as means to from integration of a all and medium enterprise,as source of high competitive power. The status quo of rapid changing into informationization have been realized at considerable level in Korea. Information society is defined as information technology is main key to determine individuals competitiveness, which can solve effectively the side effect result from industrialization. It cleary imply that information technology is the most promising and important industry in 21st century. Therefore, We should seek to foster independent a small and medium enterprise and develop them corresponding to new concept of a small and medium enterprise in 21st century. The main frame of policy should be new economic system, which can contribute establishment of a small and medium enterprise, management innovation. It also attribute a small and medium enterprise to reveal their creative. New economic paradigm in 21st will be expanded with organization, market, technology. So far, a small and medium enterprise has been acknowledge as economic weaker and the one should be protected. However, In 21st century a small and medium enterprise will be considered as active majority or a source of creative. Development of technology to produce a small quantity with variety product and acceleration of knowledge and informationization will result in comparative merits of a small and medium enterprise. Hereby, The role and relative importance of a small and medium enterprise in our economic will getting be larger and It will be developed as the main force to activate the economic. However, Only a small and medium enterprise, which overcome difficulty with active desire and effort to improve their lot can be developed as a competitive enterprise in 21st century in considering themselves to be developed as diversity, active, independent, business by an enterprise.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.2
• /
• pp.7-13
• /
• 2011

This paper presents a Time-to-Digital Converter which is a key block of an All-Digital Phase Locked Loop. In this work, a Vernier Delay Line is added in a conventional Gated Ring Oscillator, so it could get multi-phases and a high resolution. The Gated Ring Oscillator uses 7 unit delay cell, the Vernier Delay Line is used each delay cell. So proposed Time-to-Digital Converter uses total 21 phases. This Time-to-Digital Converter circuit is designed and laid out in $0.13{\mu}m$ 1P-6M CMOS technology. The proposed Time-to-Digital Converter achieves 26ps resolution, maximum input signal frequency is 100MHz and the digital output of proposed Time-to-Digital Converter are 8-bits. The proposed TDC detect 5ns phase difference between Start and Stop signal. A power consumption is 8.4~12.7mW depending on Enable signal width.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.4
• /
• pp.47-53
• /
• 2011

The Electric Multiple Unit (EMU) has many types of door system such as sliding door, plug door etc.al. according to customer's requirements. The sliding door is widely used in Korea but has weak point in the noise problem. In the low operation speed, the noise coming from outer side of the EMU is not an important factor. As the speed is higher than before, noise is increased and make a problem. The main cause of noise is the imperfect air tightness in the EMU. The plug door system has advantages for the noise reduction characteristic in the high speed area. We have been developing electric plug-in door. The door is controlled by Door Control Unit(DCU) following the order of Automatic Train Protection (ATP) that is a kind of train signalling system. DCU has to simultaneously open and close the doors and the operation of it is related to the passengers safety. So DCU is a safety device that is important to reliability and safety. DCU is composed of several devices of control, motor driving, Input/Output, communication and power. In this paper, we will describe the functions, characteristic, requirement, subsystem and test results of DCU used for the electric plug-in door.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.29-33
• /
• 2004

In this paper, we took the basic experiment in order to explore the characteristics of optical CT(optical current transformer) for measuring high current in a superhigh voltage condition using faraday effect and wrote that. We used the 1,310[nm] Laser Diode for the source of light and PIN-Photodiode for receiver. The transmission line of light was composed of the single-mode fiber of 30[m] which could maintain the state of polarization in the optical fiber. The range of current was from 400[A] to 1300[A]. In addition, the temperature ranged from $20[^{\circ}C}]\;to\;50[^{\circ}C]$. In a same experiment condition, a power magnitude increases in proportion as input current is increasing and temperature become low. The maximum ratio of error in temperature of $50[^{\circ}C]$ appears 0.15[%] and the 0.16[%], 1.24[%] and 0.07[%] is ratio of error in respectively $40[^{\circ}C],\;30[^{\circ}C],\;and\;20[^{\circ}C]$.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.359-369
• /
• 2020

In this paper, we proposed a charge pump (CP) circuit that has a wide operating range while reducing the current mismatch for the PLL that generates the main clock of the CMOS X-Ray detector. The operating range and current mismatch of the CP circuit are determined by the characteristics of the current source circuit for the CP circuit. The proposed CP circuit is implemented with a wide operating current mirror bias circuit to secure a wide operating range and a cascode structure with a large output resistance to reduce current mismatch. The proposed wide operating range cascode CP circuit was fabricated as a chip using a 350nm CMOS process, and current matching characteristics were measured using a source measurement unit. At this time, the power supply voltage was 3.3 V and the CP circuit current ICP = 100 ㎂. The operating range of the proposed CP circuit is △VO_Swing=2.7V, and the maximum current mismatch is 5.15 % and the maximum current deviation is 2.64 %. The proposed CP circuit has low current mismatch characteristics and can cope with a wide frequency range, so it can be applied to systems requiring various clock speed.