• Polymer(Korea)
• /
• v.39 no.2
• /
• pp.338-345
• /
• 2015

Poly(phenylene oxide) (PPO) and polyether imide (PEI) were sulfonated and aminated to create sulfonated poly(phenylene oxide) (SPPO) and aminated polyether imide (APEI), respectively. Characterization of the SPPO and APEI were performed via measurements of FTIR, thermogravimetry (TGA), swelling degree, ion exchange capacity (IEC), and ion conductivity. Next, the surfaces of these membranes were modified by surface fluorination at room temperature. The surface fluorinated SPPO and APEI membranes underwent characterization again for the mentioned measurements to determine any differences. The 3 types of bi-polar membranes were prepared by varying the IEC of the APEI at a fixed SPPO IEC value, which were applied to the low and high NaCl concentration of feed solution at the different current density, respectively. The hypochlorite concentration derived from the surface fluorinated membranes was dependent on the IEC of the APEI and ranged from 491 to 692 ppm at $80mA/m^2$. At low current density of $5mA/m^2$, the hypochlorite concentrations ranged from 18 to 28 ppm for the 4 hrs surface fluorinated membranes and their durability increased greatly.

• Membrane Journal
• /
• v.30 no.4
• /
• pp.228-241
• /
• 2020

Separators, which produces physical layer between a cathode and anode, are getting enormous attention as the quality of the separator determines the performance of lithium ion batteries (LIBs). Porous membranes based on polyethylene (PE) and polypropylene (PP) are generally utilized as the separator of LIBs because of their high electrochemical stability and suitable mechanical strength. However, low thermal resistance and wettability of PE and PP membranes limited the potential of LIBs. Operating at the temperature exceeding the melting point of membranes, the separators change their structures which lead to short circuit of LIBs. Low wettability of the separators corresponds to low ionic conductivity which increases the cell resistance. To overcome these weaknesses of PE and PP separators, different types of separator were prepared by co-electrospinning, applying coating layer, forming core shell around membrane, and papermaking method. The synthesized separator greatly enhanced the heat resistance and wettability of separator and mechanical properties like flexibility and tensile strength. In this review different type of polymer membrane used as separator in lithium ion battery are discussed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.13 no.3
• /
• pp.103-108
• /
• 1980

The contents of inorganic conservative constituents in Nagdong River water were determined at Mulgeum where the intake station for Busan city water is located. Samples were taken at intervals of one hour from 7 a.m. to 7 p.m. at spring and neap tides of every month from January 1979 to April 1980. Annual ranges and means of the chemical constituents were as follows: electrical conductivity $99-912\mu\mho/cm,\;200\mu\mho/cm;$ chlorides 6.0-256 ppm, 17.2 ppm; sulfates 4.1-37.9 ppm, 23.5 ppm; calcium 4.2-28 ppm, 13 ppm; magnesium 2.2-23 ppm, 5.6 ppm; sodium 5,0-126 ppm, 14 ppm; and potassium 1.2-10.8 ppm, 2.6 ppm respectively. At several times in this period, the concentrations of chloride ion exceeded 150 ppm that is the criteria for drinking water. The chloride ion concentration was higher at spring tides than that at neap tides and the contents of inorganic conservative constituents were higher in winter than those in summer. The chloride ion concentration showed the highest value at Mulgeum about 4 hors after the high water in Busan harbour.

• Journal of the Korean earth science society
• /
• v.24 no.4
• /
• pp.303-314
• /
• 2003

Ocean-air observation using an Automatic Weather Station (AWS) and Conductivity Temperature Depth (CTD) was conducted in the Mid-Yellow Sea off Korea during 8-10 July 2002. A water mass lower than 17$^{\circ}C$ around the Taean peninsula and a tidal front between 36$^{\circ}$20'N and 36$^{\circ}$30'N were observed. The horizontal distribution of air temperature was similar to that of sea surface temperature (SST). Hourly observation around Dukjuk island showed the cold and saline southwesterly and the warm and fresh northeasterly in phase with tidal current. Sea fogs two times formed at 2300 LST 8-0130 LST 9, and 0300-0600 LST 9 July 2002 during the observation period, respectively. During the initial stage of fogs, winds became northeasterly at the speed of 2-4m/s$^{-1}$, and air temperature dropped to 18$^{\circ}C$, as the North Pacific High weakened. The satellite image indicated that sea fogs formed over warm water in the western Yellow Sea and moved eastward toward the observation site, which could be called a steam fog. The fogs dissipated when wind speed and air temperature increased.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.6
• /
• pp.485-493
• /
• 2007

Introduction: Although several types of calcium-phosphate coumpound have been frequently applied to osseous defects at maxillofacial area for many years, there is a controversy about its efficiency on bone conductivity comprared to xenograft bone substitute. Alloplastic carbonapatite has been introduced to improve disadvantages of hydroxyapatite and to mimic natural bone containing carbon elements. However, a preclinical study about its efficiency of osteoconductivity has not been reported. This study was performed to evaluate the early osteoconductive potential of synthetic carbonapatite with multiple pores relative to anorganic bovine xenograft. Materials and methods: Total 5 beagle dogs were used for maxillary augmentation model. The control (anorganic bovine xenograft) and experimental groups (synthetic carbonapatite) were randomly distributed in the mouth split design. After bone graft, all animals were sacrificed 4 weeks after surgery. Histological specimens with Masson Trichrome staining were made and histomorphometrically analysed with image analyser. The statistical analysis was performed using paired t-test. Results: In both groups, all animals had no complications. The experimental group showed relatively much new bone formation around and along the bone substitutes, whereas it was clearly reduced in the control group. The ratios of new bone area to total area, to material area and to the residual area excluding materials were higher in the experimental group ($0.13{\pm}0.03,\;0.40{\pm}0.13,\;0.20{\pm}0.06$ respectively) than in the control group ($0.01{\pm}0.01,\;0.03{\pm}0.02,\;0.03{\pm}0.03$, respectively). And the differences between both groups were statistically significant (p<0.001, <0.01, <0.01, respectively), while the ratio of material area to total area in two groups was not significant. Conclusion: Carbonapatite showed a high osteoconductivity in the early stage of bone healing compared to bovine derived anorganic bone substitute. This study suggests that this bone materials can be applied as a reliable bone substitute in the clinical treatment.

• Journal of the Korean Ceramic Society
• /
• v.38 no.11
• /
• pp.973-979
• /
• 2001

Tin-doped indium oxide (ITO) thin films were deposited using r.f. magnetron reactive sputtering and the electrical properties, such as the resistivity, carrier concentration and mobility, were investigated as a function of the sample position under a given magnetron sputtering condition. The nonhomogeneity of the electrical properties with the sample position was observed under a given magnetron sputtering condition. The resistivity of ITO thin film on the substrate which corresponded to the center of the target had a minimum value, 2∼4$\times$10$\^$-4/$\Omega$$.$cm, and it increased symmetrically when the substrate deviated from the center. The density measurement result also showed that ITO thin film deposited at the center has a maximum density of 7.0g/cm$^3$, which was a relative density of about 97%, and the density decreased symmetrically as the substrate deviated from the center. The nonhomogeneity of electrical properties with the deposition position could be explained with the incidence angle of the source beam alpha, which is related with an atomic self-shadowing effect. It was confirmed experimentally that the density in film affect both the carrier mobility and the conductivity. In the case where the density of ITO thin film is 7.0g/cm$^3$, the magnitude of the mean free path was identical with that of the grain size(the diameter of column). However, in the other cases, the mean free path was smaller than the grain size. These results showed that the scattering of the free electrons at the grain boundary is the major factor for the electrical conduction in ITO thin films having a high density, and there exists other scattering sources such as vacancies, holes, or pores in ITO thin films having a low density.ing a low density.

• Journal of IKEEE
• /
• v.18 no.2
• /
• pp.272-281
• /
• 2014

In electrical impedance tomography (EIT), modified Newton Raphson (mNR) method is widely used inverse algorithm for static image reconstruction due to its convergence speed and estimation accuracy. The unknown conductivity distribution is estimated iteratively by minimizing a cost functional such that the residual error namely the difference in measured and calculated voltages is reduced. Although, mNR method has good estimation performance, EIT inverse problem still suffers from ill-conditioned and ill-posedness nature. To mitigate the ill-posedness, generally, regularization methods are adopted. The inverse solution is highly dependent on the choice of regularization parameter. In most cases, the regularization parameter has a constant value and is chosen based on experience or trail and error approach. In situations, when the internal distribution changes or with high measurement noise, the solution does not get converged with the use of constant regularization parameter. Therefore, in this paper, in order to improve the image reconstruction performance, we propose a new scheme to determine the regularization parameter. The regularization parameter is computed based on residual error and updated every iteration. The proposed scheme is tested with numerical simulations and laboratory phantom experiments. The results show an improved reconstruction performance when using the proposed regularization scheme as compared to constant regularization scheme.

• Korean Chemical Engineering Research
• /
• v.51 no.5
• /
• pp.550-555
• /
• 2013

A hydrogel electrolyte consisting of potassium poly(acrylate) (PAAK) (3 wt%) in 6 M KOH aqueous solution is coated on poly(acrylonitrile) nonwoven separator to examine high-rate characteristics of activated carbon supercapacitor adopting the separator. The hydrogel is homogeneously coated on the surface pores of the nonwoven separator. The electrolyte uptake of the PAAK hydrogel maintains for 24 days higher than 230% and the coated separator shows slightly lower ionic conductivity ($2.9{\times}10^{-2}Scm^{-1}$) than that ($3.6{\times}10^{-2}Scm^{-1}$) of using 6 M KOH only. The activated carbon supercapacitor adopting the coated separator shows a specific capacitance higher than $27Fg^{-1}$ at $1000mVs^{-1}$ and a retention ratio higher than 97% after the 1000th cycle. This is due to strong interfacial contact of coated hydrogel electrolyte between the activated carbon electrode and the nonwoven separator.

• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.5
• /
• pp.735-742
• /
• 2010

Biogenic amines are synthesized by microbial decarboxylation for the putrefaction or fermentation of foods containing protein. Although biogenic amines such as histamine, tyramine, and putrescine are required for many physiological functions in humans and animals, consumption of high amounts of biogenic amines can cause toxicological effects, including serious gastrointestinal, cutaneous, hemodynamic, and neurological symptoms. In this study, a novel amperometric biosensor wasdeveloped to detect biogenic amines. The biosensor consisted of a working electrode, a reference electrode, a counter electrode, an enzyme reactor with immobilized diamine oxidase, an injector, a peristaltic pump and a potentiostat. A working electrode was fabricated with a glassy carbon electrode (GCE) by coating functionalized multi-walled carbon nanotubes (MWCNT-$NH_2$) and by electrodepositing Prussian blue (PB) to enhance electrical conductivity. A sensor system with PB/MWCNT-$NH_2$/GCE showed linearity in the range of $0.5 {\mu}M{\sim}100 {\mu}M$ hydrogen peroxide with a detection limit of $0.5 {\mu}M$. The responses for tyramine, 2-phenylethylamine, and tryptamine were 95%, 75%, and 70% compared to that of histamine, respectively. These results imply that the biosensor system can be applied to the quantitative measurement of biogenic amines.

• Korean Journal of Agricultural Science
• /
• v.24 no.2
• /
• pp.132-137
• /
• 1997

Effective storage facilities are required to stabilize the price of agricultural and marine products to preserve their qualities due to the big fluctuation of shrimp price in Korea. It is easy to make the cave because of good conditions of the land configuration, soil and convenient transportation. The cave storage can save the cost about 40% in building site and equipment, and about 50% in maintenance comparing to existing low temperature storage facilities. The cave storage provide to improve the quality of their stored products with the low heat conductivity, the constant temperature and humidity year round. Therefore, more low temperature storage facilities are required because the items are expanded from potatoes, sweet potatoes, onions, garlics, apples and chestnuts to tangerines, grapes, cabbages, radishes, and wet ginsengs. The demands of the low temperature storage facilities can be substituted into the cave storage facilities. Thus, studies are conducted to observe the changes of the components of the pure and the seasoned salted shrimps with fermentation period during stored at room temperature in cave and to establish the storing at underground facilities to produce high quality salted fish to make profit.