• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.464-468
• /
• 2003

Complex impedances with frequency and voltage variation were analyzed in $ITO/Alq_3(60nm)/Al$ device structure. At low frequency, complex impedance is mostly expressed by resistive component, and at the high frequency by resistance and capacitive component. We have also evaluated resistance, capacitance and permittivity.

• Current Optics and Photonics
• /
• v.5 no.5
• /
• pp.491-499
• /
• 2021

A scalar Fourier modal method for the numerical analysis of the scalar wave equation in inhomogeneous space with an arbitrary permittivity profile, is proposed as a novel theoretical embodiment of Fourier optics. The modeling of devices and systems using conventional Fourier optics is based on the thin-element approximation, but this approach becomes less accurate with high numerical aperture or thick optical elements. The proposed scalar Fourier modal method describes the wave optical characteristics of optical structures in terms of the generalized transmittance function, which can readily overcome a current limitation of Fourier optics.

• International Journal of Computer Science & Network Security
• /
• v.23 no.1
• /
• pp.120-124
• /
• 2023

Strong surface waves among collinearly arranged patch antenna arrays pose unwanted inter element coupling particularly when high permittivity dielectric materials are used. In order to avert those waves, a novel Defected Ground Structure (DGS) is carved out systematically between two E-plane patch antenna elements. The introduced low profile μ shaped structure consequently improves impedance bandwidth and reflection coefficient by suppressing surface waves considerably. Parametric simulation results are analyzed and discussed.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1988-1990
• /
• 2004

In this paper, we investigated electrical property of epoxy resin which includes elastomers to improve electrical and mechanical property, as varied to additive elastomer contents. There are four samples with 5[phr], 10[phr], 15[phr] and 20[phr]. We meIt was experimented with changing temperature($-80^{\circ}C{\sim}50^{\circ}C$) and frequency (10Hz, 60Hz, 1kHz, 10kHz) According to the experimental results, when the additive elastomer contents are increasing, the permittivity and tan${\delta}$ has very high value in particular at low frequency and high temperature. It also appears that those increasing rates relate to additive elastomer contents. That is to say, even though epoxy resin are improved in mechanical property according to elastomer contents, the elastic epoxy can has bad dielectric characteristics for electrical power application.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.4
• /
• pp.589-595
• /
• 2012

When surges and electromagnetic pulses from lightning or power conversion devices are considered, it is desirable to evaluate grounding system performance as grounding impedance. In the case of large-sized grounding electrodes or long counterpoises, the grounding impedance is increased with increasing the frequency of injected current. The grounding impedance is increased by the inductance of grounding electrodes. This paper presents the measured results of frequency-dependent grounding impedance and impedance phase as a function of the length of counterpoises. In order to analyze the frequency-dependent grounding impedance of the counterpoises, the frequency-dependent current dissipation rates were measured and simulated by the distributed parameter circuit model reflecting the frequency-dependent relative resistivity and permittivity of soil. As a result, the ground current dissipation rate is proportional to the soil resistivity near the counterpoises in a low frequency. On the other hand, the ground current dissipation near the injection point is increased as the frequency of injected current increases. Since the high frequency ground current cannot reach the far end of long counterpoise, the grounding impedance of long counterpoise approaches that of the short one in the high frequency. The results obtained from this work could be applied in design of grounding systems.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.296-296
• /
• 2016

ITO films doped with a small amount of high-permittivity materials not only retain the basic properties of ITO films but also improve some of their properties. We report the highly conductive and transparent (ITO:Zr) films with various substrate (RT to 300oC) temperatures on glass substrate for the HIT solar cell applications. We observed a decrease in sheet resistance from 36 to $11.8{\Omega}/{\Box}$ with the increasing substrate temperature from RT to 300oC, respectively. The ITO:Zr films showed also lowest resistivity of $1.38{\times}10-4{\Omega}.cm$ and high mobility of 42.37cm-3, respectively. The surface and grain boundaries are improved with the increase of substrate temperature as shown by SEM and AFM surface morphologies. The highly conductive and transparent ITO:Zr films were employed as front electrode in HIT solar cell and the best performance of device was found to be Voc = 710 mV, Jsc = 33.70 mA/cm2, FF = 0.742, ${\eta}=17.76%$ at the substrate temperature of $200^{\circ}C$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.8 s.99
• /
• pp.797-802
• /
• 2005

In this paper, we design a UHF band RFID tag antenna which is conjugate matched to an impedance of a chip and also mountable on conductive materials. The proposed tag antenna is very compact($50{\times}30{\times}4mm$) with a modified PIFA shape. The proposed tag antenna has an advantage of easy matching to various chip input impedances. The performance of the antenna is evaluated by monitoring RCS in the reader direction. The RCS of the designed tag is $-10.2\;dBm^2$ when the chip is shorted and is $-21\;dBm^2$ when the chip impedance is a complex conjugate of the antenna impedance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.1
• /
• pp.47-53
• /
• 2003

In this paper we proposed a novel dual-band compact folded patch antenna with the same linear polarizations and high isolation characteristic between the two frequency range. The antenna is loaded with a high permittivity dielectric material in order to reduce the antenna size and open circuit stubs are used in order to broaden the bandwidth. The fractional bandwidths of the optimized antenna with demensions 4 mm${\times}$3 mm${\times}$5 mm are 3.0 % at 5.6 GHz band and 2.8 % at 5.8 GHz band, respectively. The isolation characteristic between the two ports is less than -26 dB within the operating frequency range.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.2
• /
• pp.100-102
• /
• 2014

$Ag(Ta,Nb)O_3$ materials have a perovskite structure with a low loss tangent. These materials have been widely researched for their applications as high-frequency, passive components. Also, $Ag(Ta,Nb)O_3$ materials have weak frequency dispersion with high dielectric permittivity which gives them enormous potential for use in electronic components, including the filters, and embedded capacitors. Therefore, our research will discuss the structural and electrical relaxation properties of $Ag(Ta_{0.8}Nb_{0.2})O_3$ ceramics for device applications. We will investigate using X-ray diffraction to understand their structural properties and will analyze voltage dependent leakage current and timedependent relaxation behavior to understand their material properties.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.5
• /
• pp.984-989
• /
• 2011

Electrical insulation is one of the most important part in a high voltage apparatus. Recently, researchers are interested in the environmental friendly vegetable oil from environmental viewpoint. Accelerated aging transformer insulating material in vegetable oil was compared to that of mineral oil. Accelerated aging oil samples produced in the oven at $140^{\circ}C$ for 500, 1000, 1500, 2000hours. And Real transformer insulation oils samples of vegetable oil and mineral oil were aged by thermal cycles repeating from $30^{\circ}C$ to $120^{\circ}C$. Samples were analyzed at 42, 63, 93, 143, 190, 240, 300 cycles. The mineral and vegetable insulating oils were investigated for breakdown voltage, water content, total acid number, viscosity, volume resistivity, insulating paper and oil permittivity, and dissolved gas analyses. The breakdown voltage of the vegetable insulating oil is higher than that found for the mineral oil; the accelerated aging progress decreased the breakdown voltage. The vegetable oil had a higher water saturation than the mineral oil; the vegetable oil has the superior water characteristics and breakdown voltage. And high viscosity of vegetable oil, care has to be taken, especially when designing the cooling system for a large transformer.