• 제목/요약/키워드: high K

Search Result 125,621, Processing Time 0.101 seconds

Pulse Density Modulated Zero Voltage Soft-Switching High-Frequency Inverter with Single Switch for Xenon Gas Dielectric Barrier Discharge Lamp Dimming

  • Sugimura, Hisayuki;Suh, Ki-Young;Lee, Hyun-Woo;Nakaoka, Mutsuo
    • Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
    • /
    • 2006.05a
    • /
    • pp.391-394
    • /
    • 2006
  • This paper presents soft switching zero voltage switching high frequency inverter for rare gas fluorescent lamp using dielectric-barrier discharge phenomenon. The simple high-frequency inverter can completely achieve stable zero voltage soft switching (ZVS) commutation for wide its output power regulation ranges and load variations under its constant high frequency pulse density modulation (PDM) scheme. Its transient and steady state operating principle is originally described and discussed for a constant high-frequency PDM control strategy under a stable ZVS operation commutation, together with its output effective power regulation characteristics-based on the high frequency PDM strategy. The experimental operating performances of this high frequency Inverter are illustrated as compared with computer simulation results and experimental ones. Its light dimming characteristics due to power regulation scheme are evaluated and discussed on the basis of simulation and experimental results. The feasible effectiveness of this high frequency inverter appliance implemented here is proven from the practical point of view.

  • PDF

The regulatory mechanism of insulin like growth factor secretion by high glucose in mesangial cell: involvement of cAMP (Mesangial 세포에서 고포도당에 의한 insulin-like growth factor의 분비조절기전에 관한 연구: cAMP와의 관련성)

  • Heo, Jung-sun;Kang, Chang-won;Han, Ho-jae;Park, Soo-hyun
    • Korean Journal of Veterinary Research
    • /
    • v.43 no.4
    • /
    • pp.563-571
    • /
    • 2003
  • Dysfunction of mesangial cells has been contributed to the onset of diabetic nephropathy. Insulin like growth factors (IGFs) are also implicated in the pathogenesis of diabetic nephropathy. However, it is not yet known about the effect of high glucose on IGF-I and IGF-II secretion in the mesangial cells. Furthermore, the relationship between cAMP and high glucose on the secretion of IGFs was not elucidated. Thus, we examined the mechanisms by which high glucose regulates secretion of IGFs in mesangial cells. Glucose increased IGF-I secretion in a time- (>8 hr) and dose- (>15 mM) dependent manner (p<0.05). Stimulatory effect of high glucose on IGF-I secretion is predominantly observed in 25 mM glucose (high glucose), while 25 mM glucose did not affect cell viability and lactate dehydrogenase release. High glucose also increased IGF-II secretion. The increase of IGF-I and IGF-II secretion is not mediated by osmotic effect, since mannitol and L-glucose did not affect IGF-I and IGF-II secretion. 8-Br-cAMP mimicked high glucose-induced secretion of IGF-I and IGF-II. High glucose-induced stimulation of IGF-I and IGF-II secretion was blocked not by pertussis toxin but by SQ 22536 (adenylate cyclase inhibitor). Rp-cAMP (cAMP antagonist), and myristoylated protein kinase A (PKA) inhibitor amide 14-22 (protein kinase A inhibitor). These results suggest that cAMP/PKA pathways independent of Gi protein may mediate high glucose-induced increase of IGF-I and IGF-II secretion in mesangial cells. Indeed, glucose (>15 mM glucose) increased cAMP formation. In conclusion, high glucose stimulates IGF-I and IGF-II secretion via cAMP/PKA pathway in mesangial cells.

Antioxidative and Anti-aging Effects of Sancho (Zanthoxylum schinifolium) Extract in Rats Fed High Fat Diet

  • Jang Mi-Jin;Woo Mi-Hee;Rhee Soon-Jae;Cho Sung-Hee
    • Nutritional Sciences
    • /
    • v.9 no.3
    • /
    • pp.159-166
    • /
    • 2006
  • This study was performed to investigate antioxidative and anti-aging action of extracts from Sancho (Zanthoxylum schinifolium) leaves. Two extracts were obtained by 80% methanol extraction followed by subsequent fractionation with methylene chloride (MC) and n-butanol (B) and fed at one or three levels to rats on normal level (5%) of fat (control) and high fat(20%) in diets. Male Sprague-Dawley rats weighing about 100 g were divided into ten groups such as control diet group(C), control diet+0.50%B group (CB), control diet+0.50%MC group (CMC), high-fat diet group (HF), high-fat diet+0.25%B group (HBL), high-fat diet+0.50%B group (HBM), high-fat diet+0.75%B group (HBH), high-fat diet+0.25%MC group (HMCL), high-fat diet+0.50%MC group (HMCM) and high-fat diet+ 0.75%MC group (HMCH) and fed each diet for four weeks. The effects of the extracts on antioxidant enzyme activities and indices of lipid peroxidation and aging were seen only in high fat diet groups. Hepatic superoxide dismutase and aryleaterase activities were not changed by Sancho extracts. But glutathione peroxidase, catalase and paraxonase activities were significantly restored by both MC and B at the level of 0.75% lipid peroxide which was increased by high fat diet was significantly reduced by B and MC at the level of 0.25% and over. Lipofuscin fluorescence and cabonyl value were increased by high fat diet were reduced by B and MC at the level of 0.5% and over. It is concluded that the Sancho extracts can be utilized as functional ingredients of health foods for reducing oxidative stress.

A Method for Forecasting Demand of High Touch Product Using Matrix Analysis of Target Populations and Product Functions (Target Population과 Product Function의 Matrix 분석을 이용한 High Touch 신제품의 판매예측 방법)

  • Park, Won-Hui;Kim, Dae-Gap;Kim, Ki-Sun;Lee, Sang-Won;Lee, Myun-Woo
    • Journal of the Ergonomics Society of Korea
    • /
    • v.26 no.1
    • /
    • pp.79-85
    • /
    • 2007
  • Demand forecasting methods for a consumer product such as TV or refrigerator are widely known. However, sales forecast for a brand new product cannot be estimated using conventional forecasting methods. This study proposes a five-step procedure in forecasting a newly developed product. Step one defines functions in a High Touch product in order to estimate relative attraction of the product to consumer group. In step two, for a comparison purpose, a compatible product that is successfully penetrated into market is selected. Step three breaks a target population into many segments based on demography. Step four calculates relative attraction between the High Touch product and the compatible product. Finally, market penetration rate of the High Touch product is estimated using a bell-shaped diffusion curve of the compatible product. The process offers a method to estimate potential demand and growth pattern of the new High Touch product.

A Study on the Resistance Characteristics of a Stepped Planing Hull Using a High-Speed Towing System (고속 예인시스템을 이용한 단을 가진 활주형선의 저항특성 고찰)

  • Shin, Jeong-Il;Yang, Ji-Man;Park, Ho-Won;Kim, Jae-Sung;Kim, Hyo-Chul
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.42 no.4 s.142
    • /
    • pp.341-349
    • /
    • 2005
  • With increasing demands of high speed transportation, recently a lot of high speed marine vehicles, such as SWATH, semi-planing craft, planing craft, hydrofoil craft, SES and so on, have been paid attention especially in high speed region over the Froude number 0.5. The resistance characteristics of the vehicles should be experimentally evaluated in the towing tank. At the Seoul National University, a light-weight cantilever type towing carriage was devised and installed in the towing tank. Wireless measurement devices were also provided for appropriate data acquisition during high-speed towing tests. With the new carriage system, a series of model tests were performed to investigate the hydrodynamic characteristics of a stepped planning hull in the towing tank and the resistance performances of the hull are introduced in this report.

A High-Efficiency High-Power Step-Up Converter with Low Ripple Content

  • Kang Jeong-il;Roh Chung-Wook;Moon Gun-Woo;Youn Myung-Joong
    • Proceedings of the KIPE Conference
    • /
    • 2001.10a
    • /
    • pp.708-712
    • /
    • 2001
  • A new phase-shifted parallel-input/series-output (PI SO) dual inductor-fed push-pull converter for high-power step­up applications is proposed. This converter is operated at a constant duty cycle and employs an auxiliary circuit to control the output voltage with a phase-shift between the two modules. It features a voltage conversion characteristic which is linear to changes in the control input, and high step-up ratio with a greatly reduced switch turn-off stress resulting in a significant increase in the converter efficiency. It also shows a low ripple content and low root-mean-square (RMS) current in the output capacitor. The operational principle is analyzed and a comparative analysis with the conventional pulse-width-modulated (PWM) PISO dual inductor-fed push-pull converter is presented. A 50kHz, 800W, 350Vdc prototype with an input of 20-32Vdc has also been constructed to validate the proposed converter. The proposed converter compares favorably with the conventional counterpart and is considered well suited to high-power step-up applications.

  • PDF

High Gain Soft switching Bi-directional Converter for Eco-friendly Vehicle HDC (친환경 자동차 HDC를 위한 고승압 소프트스위칭 양방향 컨버터)

  • Oh, Se-Cheol;Park, Jun-Sung;Kwon, Min-Ho;Choi, Se-Wan
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.17 no.4
    • /
    • pp.322-329
    • /
    • 2012
  • This paper proposes a non-isolated bidirectional soft-switching converter with high voltage for high step-up/down and high power applications. Compared to the conventional boost converter the proposed converter can achieve approximately doubled voltage gain using the same duty cycle. The voltage ratings of the switch and diode are reduced to half, which result in the use of devices with lower $R_{DS(ON)}$ and on drop leading to reduced conduction losses. Also, voltage ratings of the passive components are reduced, and therefore the total energy volume is reduced to half. Further, the switch is turned on with ZVS in the CCM operation which results in negligible surge caused leading to reduced switching losses. The validity of the proposed converter is proved through a 10kW prototype.

Electric Power Conversion System for Flywheel Energy Storage System using High Tc Superconducting Bearings (고온초전도체 베어링을 사용하는 플라이휠 에너지 저장 시스템을 위한 전력변환 시스템)

  • Jeougn, Hwan-Myoung;Choi, Jae-Ho;Lee, Ho-Jin;Hong, Gye-Won
    • 한국초전도학회:학술대회논문집
    • /
    • v.9
    • /
    • pp.305-309
    • /
    • 1999
  • This paper presents an high efficiency energy conversion system for very high-speed flywheel energy storage system using high Tc superconducting bearings. Main configuration of power convertor is designed to replace of the conventional battery with EMB(Electro Mechanical Battery). PMSM(Permanent Magnet Synchronous Motor) using Halbach array is used as the energy conversion system of motor and generator. Some PWM methods for the high frequency inverter is described and the power factor effects to the torque characteristics and efficiency of the motor and generator is analyzed. As the results, it is verified that the inverter output current is well regulated to be in-phase or inverse-phase sinusoidal waveform to have the wide operational range from 2,500rpm to 42,000rpm. Proposed circuit is designed to obtain the very high speed, high efficiency and stable rotational characteristics, and to be applied to1.2r[kW]/65[Wh] system.

  • PDF