• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권2호
• /
• pp.107-112
• /
• 2005

We present an AlGaN/GaN metal-insulator-semiconductor-heterostructure field effect transistor (MIS-HFET) with an $Al_2O_3-HfO_2$ laminated high-k dielectric, deposited by plasma enhanced atomic layer deposition (PEALD). Based on capacitance-voltage measurements, the dielectric constant of the deposited $Al_2O_3-HfO_2$ laminated layer was estimated to be as high as 15. The fabricated MIS-HFET with a gate length of 102 m exhibited a maximum drain current of 500 mA/mm and maximum tr-ansconductance of 125 mS/mm. The gate leakage current was at least 4 orders of magnitude lower than that of the reference HFET. The pulsed current-voltage curve revealed that the $Al_2O_3-HfO_2$ laminated dielectric effectively passivated the surface of the device.

• 한국재료학회지
• /
• 제18권3호
• /
• pp.123-127
• /
• 2008

The production of tin oxide ($SnO_2$) microrods on iridium (Ir)-coated substrates was achieved through the thermal evaporation of Sn powders in which a sufficiently high $O_2$ partial pressure was employed. Scanning electron microscopy revealed that the product consisted of microrods with diameters that ranged from 0.9 to $40\;{\mu}m$. X-ray diffraction, high-resolution transmission electron microscopy, and selected area electron diffraction indicated that the microrods were $SnO_2$ with a rutile structure. As the microrod tips were free of metal particles, it was determined that the growth of $SnO_2$ microrods via the present route was dominated by a vapor-solid mechanism. The thickening of rod-like structures was related to the utilization of sufficiently high $O_2$ partial pressure during the synthesis process, whereas low $O_2$ partial pressure facilitated the production of thin rods.

• 한국세라믹학회지
• /
• 제20권3호
• /
• pp.250-254
• /
• 1983

The effects of the various amount of $CeO_2$ $MnO_2$ and $Fe_2O_3$ added to the high lead-silicate glasses on the X-ray induced coloration were studied. The light transmissions and chromaticities of the glasses before and after exposing to X-ray radiation were measured to investigate the effects by additivies. The results are as follows ; 1. High lead-silicate glass added $CeO_2$ or $MnO_2$ has a little effect on the transmission but has a considerable effect on the chromaticity. The chromaticies of 56.6wt% PbO content glasses were changed as 3-7 times as those of 28.3wt% PbO content glasses. 2. By the X-ray irradiation glasses containing 0.2-0.5wt% $CeO_2$ were changed the least in chromaticity that is the most effective in preventing the X-ray induced coloration. 3. By X-ray irradiation $MnO_2$ reduced the transmissions and showed purple coloration. 4. Transmission change amounts of the glasses added $CeO_2$ and $Fe_2O_3$ were less than those of the glasses added $CeO_2$ alone by X-ray irradiation.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.199-209
• /
• 2018

Polyethersulfone (PES)/sulfonated $TiO_2$ ($STiO_2$) nanoparticles (NPs) UF blended membranes were fabricated with different loadings of $STiO_2$. The modified membranes exhibited significant improvement in surface roughness, porosity, and pore size when compared to the PES membrane. The $P-STiO_2$ 1 and $P-TiO_2$ 1 blended membranes exhibited higher water flux, approximately 102.4% and 62.6%, respectively, compared to PES. SPP-$STiO_2$ and $P-STiO_2$ showed lower Rir fouling resistance than the $P-TiO_2$ blended membrane. Overall, the $STiO_2$-blended membranes provide high hydrophilicity permeability, anti-fouling performance, and improved BSA rejection attributed to the hydrogen bonding force and more electrostatic repulsion properties of $STiO_2$.

• Bulletin of the Korean Chemical Society
• /
• 제27권6호
• /
• pp.821-829
• /
• 2006

A series of catalysts, $NiO/La_2O_3-ZrO_2/WO_3$, for acid catalysis was prepared by the precipitation and impregnation methods. For the $NiO/La_2O_3-ZrO_2/WO_3$ samples, no diffraction lines of nickel oxide were observed, indicating good dispersion of nickel oxide on the catalyst surface. The catalyst was amorphous to X-ray diffraction up to 300 ${^{\circ}C}$ of calcination temperature, but the tetragonal phase of $ZrO_2$ and monoclinic phase of $WO_3$ by the calcination temperatures from 400 ${^{\circ}C}$ to 700 ${^{\circ}C}$ were observed. The role of $La_2O_3$ in the catalyst was to form a thermally stable solid solution with zirconia and consequently to give high surface area and acidity. The high acid strength and high acidity were responsible for the W=O bond nature of complex formed by the modification of $ZrO_2$ with $WO_3$. For 2-propanol dehydration the catalyst calcined at 400 ${^{\circ}C}$ exhibited the highest catalytic activity, while for cumene dealkylation the catalyst calcined at 600 ${^{\circ}C}$ showed the highest catalytic activity. 25-$NiO/5-La_2O_3-ZrO_2/15-WO_3$ exhibited maximum catalytic activities for two reactions due to the effects of $WO_3$ modifying and $La_2O_3$ doping.

• 천문학회보
• /
• 제41권2호
• /
• pp.46.3-46.3
• /
• 2016

We present the ALMA Cycle 2 results "Two New SiO Maser Sources in High-Mass Star-Forming Regions" which was published in the Astrophysical Journal (Vol. 826, P157, 2016). Silicon monoxide (SiO) masers are rare in star forming regions, with the exception of five known SiO maser sources. However, we detected two new SiO maser sources from infrared loud clumps of the high-mass star forming regions G19.61-0.23 and G75.78+0.34 using the KVN single dish. High angular resolution observations with ALMA and JVLA toward G19.61-0.23 suggest that the deeply embedded young stellar object (YSO) of SMA 1 is powering the SiO masers. In addition, the SiO v=1, J=1-0 line shows four spike features while the v=2 maser shows combined features of one spike and broad wing components, implying energetic activities of the YSO of SMA 1 in the G19.61-0.23 hot molecular core. The SiO v=0, J=2-1 emission shows bipolar outflows in NE-SW direction with respect to the center of the SiO maser source. A high angular resolution map of the SiO v=1, J=2-1 maser in G75.78+0.34 shows that the SiO maser is associated with the CORE source at the earliest stage of high-mass star formation. Therefore, the newly detected SiO masers and their associated outflows will provide good probes for investigating this early high-mass star formation.

• 한국안광학회지
• /
• 제8권1호
• /
• pp.17-22
• /
• 2003

$PbO-Bi_2O_3-B_2O_3-SiO_2$ 유리계의 DTA 곡선과 FT-IR 스펙트럼을 조사하였다. 유리전이 온도의 조성비 의존성은 60 mol% $Bi_2O_3$에서 유리계의 구조가 변화하는 것으로 나타났다. 높은 비스무스 함량을 가지는 시료의 FT-IR 스펙트럼 조사에서 무거운 양이온 $Bi^{3+}$의 단위구조와 관계되는 결합이 우세했으며 그리고 고함량의 $Bi_2O_3$ 시료에서도 역시 붕소원자의 3배위와 4배위 진동이 있었다. PbO함량이 높은 유리계의 경우, 비가교 산소밴드의 낮은 강도는 PbO의 망목형성제 역할에 기인 한 것으로 생각된다. 유리의 흡수대는 결정화상태에서 강도가 매우 큰 변화를 보였다.

• 한국표면공학회지
• /
• 제36권5호
• /
• pp.406-412
• /
• 2003

FT-IR and thermography were used to investigate the infrared radiation characteristic of SiO$_2$ film and SiO$_2$/Fe$_2$O$_3$film coated on aluminum. Through FT-TR spectrum, SiO$_2$film showed high infrared absorption in accordance with the stretching vibration of Si-O-Si, and as$ Fe_2$$O_3$was mixed additional absorption band appeared resulting from the stretching vibration of Fe-O at $590cm^{-1}$ and the bond of Si-O-Fe at $900 cm^{-1}$ The two kinds of film measured by the integration method and the reflective method coincided with each other in the wavelength area of infrared absorption and radiation, and corresponded well with Kirchhoff's law as the infrared emissivity is high in wavelength where infrared absorption rate is high. The emissivity of $SiO_2$ film was 0.65 and that of $SiO_2$/Fe$_2$$O_3$film was 0.77, so the addition of$ Fe_2$$O_3$ raised the infrared emissivity by approximately 13%.$ SiO_2$$Fe_2$$O_3$ film is efficient as an infrared radiator at below $100^{\circ}C$. The temperature of heat radiation after 7 minutes was 117$^{\circ}C$ in aluminum plate and $155^{\circ}C$ in $SiO_2$$Fe_2$$O_3$ film, $38^{\circ}C$ higher than the former.

• 공업화학
• /
• 제23권2호
• /
• pp.190-194
• /
• 2012

다양한 상용 $TiO_2$ 담체를 이용한 10 wt%의 Mn계 촉매를 습윤함침법으로 제조하여 $NH_3$에 의한 NO의 저온 선택적 촉매환원법(SCR) 반응 특성을 연구하였다. 촉매의 특성은 BET, XRD, XPS 그리고 TPR과 같은 물리화학적 분석을 통해 수행되었다. MnOx/$TiO_2$ 촉매의 MnOx 표면밀도는 비표면적에 영향을 받는다. 고분산된 망간산화물에 의한 낮은 MnOx surface density로 저온 SCR 활성이 증가하고 망간산화물의 $MnO_2$에서 $Mn_2O_3$로 환원되는 온도가 감소되었다. 우수한 SCR활성을 위해서는 망간산화물을 높은 비표면적을 가진 $TiO_2$에 담지되어야 하고 고분산된 비정질종이 존재해야 한다.

• 한국재료학회지
• /
• 제30권4호
• /
• pp.176-183
• /
• 2020

The high-temperature stability of YSZ specimens fabricated by die pressure and cold isostatic press (CIP) is investigated in CaCl₂-CaF₂-CaO molten salt at 1,150 ℃. The experimental results are as follows: green density 46.7 % and 50.9 %; sintering density 93.3 % and 99.3 % for die press and CIP, respectively. YSZ foremd by CIP exhibits higher stability than YSZ formed by die press due to denseness dependency after high-temperature stability test. YSZ shows peaks mainly attributed to CaZrO₃, with a small t-ZrO₂ peak, unlike the high-intensity tetragonal-ZrO₂ (t-ZrO₂) peak observed for the asreceived specimen. The t-ZrO₂ phase of YSZ is likely stabilized by Y₂O₃, and the leaching of Y₂O₃ results in phase transformation from t-ZrO₂ to m-ZrO₂. CaZrO₃ likely forms from the reaction between CaO and m-ZrO₂. As the exposure time increases, more CaZrO₃ is observed in the internal region of YSZ, which could be attributed to the inward diffusion of molten salt and outward diffusion of the stabilizer (Y₂O₃) through the pores. This results in greater susceptibility to phase transformation and CaZrO₃ formation. To use SOM anodes for the electroreduction of various metals, YSZ stability must be improved by adjusting the high-density in the forming process.