• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.608-613
• /
• 2010

This study is on development of UV-cured water soluble coating composition which have more improved anti-cigar burning to prevent a surface of PVC tile from damage of heat. To make an anti-cigar burning coating solution, thermostable agent that synthesize main materials phosphorus compound, guanidine and ammonium phosphate dibasic used temporary flame retardants, changing their contents from 10 to 30wt% against quantities of resin and compounded. After coating PVC tiles using bar-coating method that can adjust a thickness, we estimated surface properties of coated layer such as anti-cigar burning, adhesive power, chemical resistance, thickness of coating, and so on. Results showed that a coating composition added 30 wt% of phosphorus compound and coated with No.12 bar-coater had the best optimized surface property in anti-cigar burning effect, adhesive power and chemical resistance. Also, we could find anti-cigar burning effect was improved as thermostable agents content and coating thickness increased.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.26 no.2
• /
• pp.159-172
• /
• 1993

Collagenase existed in the internal organs of filefish Novoden modestrus was isolated with ammonium sulfate and was purified by ion exchange column chromatography with DEAE-Sephadex A-50 and gel filtration with Sephadex G-150. The activity of the purified enzyme was increased 92.4 folds than that of the crude one and the yield of the purified one was $10.9\%$. The optimum conditions showing the maximum activity of the crude enzyme to digest insoluble collagen(Type I) were $55^{\circ}C$ and pH 8.0, while those showing the maximum activity of the purified one were $55^{\circ}C$ and pH 7.75. However, the use of the crude enzyme for skinning of filefish was more profitable because the yield was 800 folds higher than that of the purified one and the cost was also able to economy. When hydrolysis for skinning of filefish was conducted with $0.3\%$(w/w) crude collagenase at $50^{\circ}C$ and pH 8.0 for 3hrs, there was some problem to cause a damage on muscle of the fish by heat. To solve such problem for the skinning, the hydrolysis at $18^{\circ}C$ for 4hrs with $0.3\%$ (w/w) crude enzyme after pretreated with 0.5M acetic acid for 10 min provided a good result for skinning of filefish.

• Journal of the Korean Society of Safety
• /
• v.35 no.4
• /
• pp.74-83
• /
• 2020

In Korea, about 110,000 LPG small storage tanks of less than three tons have been installed in restaurants, houses and factories, and are used as LPG supply facilities for cooking, heating and industrial use. In the case of combustible liquefied gas storage tanks, the tank may rupture due to the temperature increase of the tank steel plate (approximately 600℃) even when the safety valve is operating normally, causing large-scale damage in an instant. Therefore, in the event of a fire near the LPG small storage tank, it is necessary to accurately predict the timing of the BLEVE(Boiling Liquid Expanding Vapour Explosion) outbreak in order to secure golden time for lifesaving and safely carry out fire extinguishing activities. In this study, we have first investigated the results of a prior study on the prediction of the occurrence of BLEVE in the horizontal tanks. And we have developed thermodynamic models and simulation program on the prediction of BLEVE that can be applied to vertical tanks used in Korea, have studied the effects of the safety valve's ability to vent, heat flux strength of external fires, size of tanks, and gas remaining in tanks on the time of BLEVE occurrence and have suggested future utilization measures.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.6
• /
• pp.526-532
• /
• 2000

The paste on the glass or fabrication of the PDP(Plasma Display Panel) barrier rib was selectively etched using focused A $r_{+}$ laser(λ=514 nm) and Nd:YAG(λ=532, 266 nm) laser irradiation. The depth of the etched grooves increase with increasing a laser fluence and decreasing a laser beam scan speed. Using second harmonic of Nd:YAG laser(532 nm) the etching threshold laser fluence was 6.5 mJ/c $m^2$ for the sample of PDP barrier rib. The thickness of 180 ${\mu}{\textrm}{m}$ of the sample on the glass was clearly removed without any damage on the glass substrate by fluence of 19.5J/c $m^2$beam scan speed of 20${\mu}{\textrm}{m}$ /s. In order to increase the etch rate of the barrier rib material barrier rib samples heated by a resistive heater during laser irradiation. The heated sample has many defects and becomes to be fragile. This imperfection of the structure compared to the sample without heat treatment allows the effective etching by the focused laser beam. The etch rates were 65${\mu}{\textrm}{m}$/s and 270 ${\mu}{\textrm}{m}$/s at room temperature and 20$0^{\circ}C$, respectively.y.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.3 no.1
• /
• pp.33-45
• /
• 1966

The effect of thermal stress on a ship's hull is not considered to be serious by most naval architects. Frequently, however, cracking of hulls has been reported which occurred at sea while there were no external forces except the heat from the sun. Detailed investigations have been made of these reports and it has been reliably determined that the damage was initiated by solar heating. The author is not interested in all steel ship or in the applicability and validity of the formular itself, as it has already been proven by the experiments such as S.S. Boulder Victory. The author therefore proceeds directly to calculate the stress distribution on he hull and superstructure of the prototype model ship. These calculations are based on the experimental nonsymetrical temperature gradient data taken earlier on the Boulder Victory. The calculations were made principally to determine the extent of stresses which occurred on an all-steel ship in one case and secondly, those that occurred on a ship with a steel hull and an aluminum superstructure. From the calculations, the author expected the stress distribution of the two case would show distinctly different aspects, but the acquired results were very similar. Generally, at the point of junction of the steel hull and aluminum superstructure sharp peak stresses appeared. At the juncture of the superstructure and the main deck the ship with the aluminum superstructure registered almost 1000 psi more stress than did the ship with the all-steel construction. In the view of these findings, the author recommends to ship designers that pay particular attention to the point of junction of steel and aluminum plate. The author has proven that it is extremely important that a greater safety factor be used at the aluminum-steel junction point than at any other point. Although thermal effects cause high juncture-point stresses in all-steel ships, they are not nearly as critical as in ship constructed of two or more metals.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.5
• /
• pp.428-436
• /
• 2008

For Longevity of implant, considerations of biomechanical and microbiological aspects must be done. Recently, due to the remarkable development of bone grafting procedure. Implant has been implanted into the more favorable sites but peri-implantitis resulted from periodontal bacteria may obscure the long-term prognosis. Although many different modalities have been introduced to treat the failed implant. Implant's surface and irreversible bony destruction around the implant prevents good result. After Er,Cr:YSGG (waterlase) laser using the wave-length of 2780nm has been introduced to dental field, good results have been reported. Because waterlase uses the hydrokinetic force of water. It is excellent device to detoxify the implant surface mechanically without the heat generation and damage to the implant surface. We designed to evaluate waterlase effect on the peri-implantitis has been occurred after implantation. Four beagle dogs were involved. We have made four premolar extraction in each right and left side of the lower jaw and placed two implants in the anterior of the jaw as a control and six implant were placed posterior in each socket after extraction immediately as an experimental group. We tied floss-silk in each implant to make peri-implantitis intentionally. After three months, we explored peri-implant sites on each experimental fixtures. Using waterlase laser irradiation was performed on that implantitis sites under 3W, air 30% and water 20% intensity for 2 minutes. In control group, we repositioned the flap to cover the exposed fixture without any supportive care. Three months later, we sacrificed experimental animals and extracted and preparated bone blocks with Donath and Breuner (982), Donath (988)'s methods and examined under microscope. We have obtained good re-osseointegration around fixtures after treating with waterlaser irradiation. But it was shown fibroosseointegration in the control group.

• Korean Journal of Agricultural Science
• /
• v.46 no.4
• /
• pp.981-989
• /
• 2019

Coffee is a popular beverage worldwide, and the scale of consumption is growing rapidly. Many studies have shown that increased coffee consumption has various effects on human health, including beneficial effects on liver diseases, clinical type 2 diabetes, and Parkinson's disease. However, the influences of coffee or caffeine (a component of coffee) on the gut microbiota have not been examined in detail. Here, we tested whether caffeine could alter the antimicrobial activity of L. casei against E. coli. Interestingly, we found that treatment with 0.3 mg/mL caffeine increased the antimicrobial activity of L. casei against E. coli. This activity was not associated with the release of lactic acid but did appear to be related to a heat-labile factor present in the L. casei culture supernatant. Our analyses suggest that the putative antimicrobial factor found in the culture supernatant of L. casei treated with caffeine may be bacteriocin. Taken together, our results suggest that caffeine, which is an ingredient of coffee, increases the antimicrobial activity of L. casei against E. coli through the enhanced production of bacteriocin. These findings also suggest that coffee consumption affects the ability of beneficial bacteria to decrease pathogenic bacteria and/or prevent the progression of bacterial infection-associated diseases in the gut.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.6
• /
• pp.575-580
• /
• 2010

The research which sees the wild animals back with the system for the penetration prevention, when the wild animals approaches with the infrared ray sensor which composes a proposed system to use radiation department and the solar heat which occur and to make lead in the spiral which informs a guard to application of power department and back the edge where uses the battery of the application of power department which supplies all the member and the outside minute electric current to do in order to maximize a warning utterance or a luminous effect, an utterance department and the light for a prevention and about the system which restrains the wild animals is a thing. The proposed system which sees the express highway and the national road, with region degree establishes back the same wild animals appears and disappears frequently a day and night and between in circumference and goes without question appears and disappears the penetration of the wild animals which prevents and the animal the vehicle and prevents the damage which collides, joins in and driver and is the ecosystem of natural environment protects preserves.

• Child Health Nursing Research
• /
• v.16 no.4
• /
• pp.268-276
• /
• 2010

Purpose: The purpose of this study was to provide basic data to improve coping abilities of elementary school students in emergency situations. Method: The data were collected from 1633 3-6th grade elementary school students using a self-report questionnaire. Results: 1) The mean score for the coping ability of the students was low at .38(${\pm}.36$). 2) The mean scores for the 8 categories were, [Care for common symptoms], .54(${\pm}.48$), [Call for help & check], .47(${\pm}.43$), [Care for injury by heat cold & foreign body], .39(${\pm}.45$), [Care for tissue damage], .36(${\pm}.44$), [Offering help], .36(${\pm}.42$), [Rescue & escape], .31(${\pm}.51$), [Evacuation], .28(${\pm}.49$), and [Appropriate response for the situation], .27(${\pm}.43$). The mean scores for 2 areas were, 'Acting tips', .35(${\pm}.36$) and 'First aid', .42(${\pm}.40$). There were significant differences in coping ability according to students' gender (t=4.964, p<.001), and family type (t=-2.484, p=.013). 4) Among the categories, there were significant correlations between all 8 categories and significant correlation between 'Acting tips' and 'First aid' (r=.808, p<.001), 'Acting tips' and 'Coping ability' (r=.956, p<.001), and 'First aid' and 'Coping ability' (r=.946, p<.001). Conclusion: The findings indicate a need for programs to improve the coping ability of elementary school students in emergency situations.

• KIEAE Journal
• /
• v.14 no.6
• /
• pp.93-97
• /
• 2014

Curtain wall system of office buildings has recently become very common in Korea. As the multi-layer curtain glazing is exposed to outdoor environment, it is very subjected to direct environmental impact. Consequently, breakage and cracks of glazing due to heat expansion is frequently observed. This study explores various causes and aspects for destruction of multi-layer glazing. A sensitivity analysis was performed on the basis that thermal changes causes damage to the multi-layer glazing. Air temperature in air cavity within the multi-layer glazing was examined to find its effect on multi-layer glazing breakage. Analysis showed high deflection to depth ratio of 1:1.8 and that higher the aspect ratio, smaller is the deflection. Allowable pressure showed that the weakest value is for aspect ratio of 1:2.9. Sensitivity analysis by the area of the glazing showed that as area of glazing becomes higher, allowable pressure and deflection-depth ratio becomes smaller. For allowable pressure and allowable deflection-depth within air cavity, the glazing breakage occurred at least $107^{\circ}C$. The results from glazing breakage by thermal factor shows that it is hard to break the glazing with only an increase in air cavity temperature in multi-layer glazing applied in buildings.