• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 추계학술대회 논문집
• /
• pp.124-126
• /
• 2007

This paper presents an asymmetrical half-bridge flyback converter with universal input voltage range. The leakage inductance and output capacitance of active switches are used to realize zero voltage switching(ZVS) operation during the transition state between two switches. In this paper, the operating principle and system analysis of the adopted converter are discussed in detail. A 5V/20A prototype has been implemented to verify the proposed topology and theoretical operation under various load condition and universal input voltage range.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.538-541
• /
• 2002

Dynamic analysis and compensation design for an asymmetrical half bridge do-dc converter are presented. A small-signal model is developed using the averaging method. Based on the proposed small-signal average model, the open loop transfer functions of the power stage were obtained and used for the compensation design. All theoretical predictions are validated by experiments on a prototype converter.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.142-143
• /
• 2010

An active-clamped current-fed half-bridge converter for the high step-up application is proposed in this paper. The proposed converter is composed of active clamping snubber circuits and a voltage doubler rectifier. The operational principle, theoretical analysis, and design considerations are presented. To confirm the operation, features, and validity of the proposed circuit, the experimental result for a 200W, 24V input and 400V output prototype are presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.164-167
• /
• 2005

This paper present ZVS Half-Bridge converter Using IM(Integrated Magnetics). In converter system, magnetic components are important devices used for energy storage, energy transfer, galvanic isolation and filtering. The purposes of IM(Integrated Magnetics) are to reduce the number of magnetic components and voltage/current ripple. This topology is use of three magnetics components thus increasing the cost and size of the system. A prototype featuring 300V input, 15V output, 400kHz switching frequency, and 150W output power.

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.2224-2236
• /
• 2014

The performance of an isolated high voltage full bridge converter is improved using a voltage doubler. In a conventional high voltage full bridge converter, the diode of the transformer secondary voltage undergoes a voltage spike due to the leakage inductance of the transformer and the resonance occurring with the parasitic capacitance of the diode. In addition, in the phase shift control, conduction loss largely increases from the freewheeling mode because of the circulating current. The efficiency of the converter is thus reduced. However, in the proposed converter, the high voltage dual converter consists of a voltage doubler because the circulating current of the converter is reduced to increase efficiency. On the other hand, in the proposed converter, an input current is distributed when using parallel input / serial output and the output voltage can be doubled. However, the voltages in the 2 serial DC links might be unbalanced due to line impedance, passive and active components impedance, and sensor error. Considering these problems, DC injection is performed due to the complementary operations of half bridge inverters as well as the disadvantage of the unbalance in the DC link. Therefore, the serial output of the converter needs to control the balance of the algorithm. In this paper, the performance of the conventional converter is improved and a balance control algorithm is proposed for the proposed converter. Also, the system of the 1.5[kW] PCS is verified through an experiment examining the operation and stability.

• Journal of Power Electronics
• /
• 제19권5호
• /
• pp.1099-1107
• /
• 2019

A soft switching converter with wide voltage range operation is investigated in this paper. A series resonant converter is implemented to achieve a high circuit efficiency with soft switching characteristics on power switches and rectifier diodes. To improve the weakness of the narrow voltage range in LLC converters, an alternating current (ac) power switch is used on the primary side to select a half-bridge or full-bridge resonant circuit to implement 4:1 voltage range operation. On the secondary-side, another ac power switch is adopted to select a full-wave rectifier or voltage-doubler rectifier to achiever an additional 2:1 output voltage range. Therefore, the proposed resonant converter has the capacity for 8:1 (320V~40V) wide output voltage operation. A single-stage hybrid resonant converter is employed in the study circuit instead of a two-stage dc converter to achiever wide voltage range operation. As a result, the study converter has better converter efficiency. The theoretical analysis and circuit characteristics are verified by experiments with a prototype circuit.

• Journal of Power Electronics
• /
• 제12권4호
• /
• pp.643-653
• /
• 2012

An interleaved DC/DC converter with series-connected transformers is presented to implement the features of zero voltage switching (ZVS), load current sharing and ripple current reduction. The proposed converter includes two half-bridge converter cells connected in series to reduce the voltage stress of the switches at one-half of the input voltage. The output sides of the two converter cells with interleaved pulse-width modulation are connected in parallel to reduce the ripple current at the output capacitor and to achieve load current sharing. Therefore, the size of the output chokes and the capacitor can be reduced. The output capacitances of the MOSFETs and the resonant inductances are resonant at the transition instant to achieve ZVS turn-on. In addition, the switching losses on the power switches are reduced. Finally, experiments on a laboratory prototype (24V/40A) are provided to demonstrate the performance of the proposed converter.

• 조명전기설비학회논문지
• /
• 제14권2호
• /
• pp.52-58
• /
• 2000

본 논문애서는 2단 스위치 구조를 가져는 역률 보상 회로를 적용하여 도통 손실을 저감할 수 있는 새로운 결합형 1단방식 AC/DC half-bridge 컨버터에 대한 토폴라지를 제안하고, 이에 관한 전류 불연속 모드 제어와 소프트 스위칭 특성에 대하여 연구하였다. 도통손실의 저감은 기존의 역률 보상 회로 대신 새로운 형태의 이단 스위치 구조를 가지는 역률 보상 회로를 적용함으로써 이루어친다. 제안된 토폴라지의 타당성 검증을 위해서 입력전압 100[V], 출력전압 50[V]의 500[W]급 컨버터에 대한 시뮬레이션 결과를 제시하고 분석하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1039-1040
• /
• 2006

The resonant converters cause the high voltage stress according to the input voltage, which increases the conduction loss in converter power switches. The topology of LLC half bridge resonant converter provides ZVS characteristic and also the stress of voltage and current is not higher than that of the general resonant converters. So we can expect the higher efficiency. In this paper, the LLC resonant converter is designed for the notebook computer adapter. In the adapter design, we should consider the weight, the size and overheat of the adapter. Thus the higher efficiency is an essential particular. First of all, the optimal design of transformer is the most important facts. Some parameters should be considered in order to get the highest efficiency. The adapter is designed through the considering of these parameters including the PFC circuit of the pre-regulator. It converts AC line input into about $400V_{DC}$ Link voltage of the LLC converter input and the converter has $16V_{DC}/90W$ ratings. The efficiency measured is about up to 92%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1108-1110
• /
• 2007

The resonant converters cause the high voltage stress according to the input voltage, which increases the conduction loss in converter power switches. The topology of LLC half bridge resonant converter provides ZVS characteristic and also the stress of voltage and current is smaller than that of the general resonant converters. So we can expect the higher efficiency. In this paper, the LLC resonant converter is designed for slim adapter. In the adapter design, we should consider the weight, the size and overheat of the adapter. Thus the optimal design of transformer is the most important facts. Some parameters should be considered in order to get the highest efficiency. The LLC resonant converter input is 390VDC Link voltage of PFC and the output has 16VDC/90W ratings. The efficiency measured is about up to 93%.