• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.6
• /
• pp.752-759
• /
• 2014

Varieties of research on turbulent-induced noise is conducted with combinations of acoustic analogy methods and computational fluid dynamic methods to analyze efficiently and accurately. Application of FW-H acoustic analogy without turbulent noise is the most popular method due to its calculation cost. In this paper, turbulent-induced noise is predicted using RANS turbulence model and permeable FW-H method. For simplicity, noise from 2D cylinder is examined using three different methods, direct method of RANS, FW-H method without turbulent noise and permeable FW-H method which can take into account of turbulent-induced noise. Turbulent noise was well predicted using permeable FW-H method with same computational cost of original FW-H method. Also, ability of permeable FW-H method to predict highly accurate turbulent-induced noise by applying adequate permeable surface is presented. The procedure to predict turbulent-induced noise using permeable FW-H is established and its usability is shown.

• Journal of Pharmaceutical Investigation
• /
• v.30 no.2
• /
• pp.99-105
• /
• 2000

This study compared the permeability of $[^3H]taurine,\;[^3H]phenylalanine,\;and\;[^3H]oxytocin$ through the blood-brain barrier (BBB) in mice and rats with common carotid artery perfusion (CCAP) method that modified internal carotid artery perfusion (ICAP) method. External carotid artery (ECA) was cannulated with coagulating pterygopalatine artery (PPA) in ICAP method, while CCA was cannulated without coagulating PPA in CCAP method. Also, for evaluation of BBB permeability of drugs in mice and rats, we used intravenous injection technique. The results of CCAP method in mice at a perfusion flow-rate of 2 ml/min, the brian volume of distribution $(V_D)$ of $[^{14}C]sucrose,\;[^3H]taurine,\;[^3H]phenylalanine,\;and\;[^3H]oxytocin$ were similar to the result of ICAP method in rats at perfusion flow rate of 4 ml/min. The area under the plasma concentration-time curve and brain uptake of $[^3H]taurine$ by intravenous injection technique, were $65.5{\pm}9.7%ID^*min/ml\;and\;0.515{\pm}0.093%ID/g$, respectively, in mice, and the corresponding values were $8.00{\pm}0.03%ID^*min/ml\;and\;0.052{\pm}0.003%ID/g$ in rats. But the BBB permeability surface-area product of $[^3H]taurine$ was similar between mice and rats. In conclusion, the CCAP method in mice was simple, fast and comparable to ICAP method in rats for drug permeability through the BBB.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.213-216
• /
• 2001

The H.263 Annex I method for the intraframe coding is based on the prediction in DCT domain, unlike JPEG, MPEG-1, and MPEG-2 where the intraframe coding uses block DCT, independent of the neighboring blocks. In this paper, we show the ineffectiveness of H.263 Annex I prediction method by mathematically deriving the spatial domain meaning of H.263 Annex I prediction method. Based on the derivation, we propose a prediction method which is based on the spatial correlation property of image signals. From the experiment and derivation, we verified the proposed method.

• Computational Structural Engineering
• /
• v.6 no.3
• /
• pp.125-137
• /
• 1993

Recently, many researches are being dealt with the adaptive method for improving the accuracy of finite element solution. This paper deals with rh-methods that are the combination of r and h-method ; r-method is to relocate the nodes for the grid optimization, h-method is to divide the elements with great error into the equal shape. As a results, rh-method has the same error decrease and convergence as h-method in the same degree of freedom, but it has more exact result of finite element in the state of restraining degrees of freedom than h-method alone.

• Korean Journal of Veterinary Service
• /
• v.20 no.3
• /
• pp.313-321
• /
• 1997

The antibiotic residues of the urine, the liver, the lung, the kidney and the spleen in slaughtered pigs at Kyongbuk province were detected by TLC(505 kit) and EEC-4 plate method. 1. The positive rate of residual sulfamethazine which was detected by 505 kit in the urine (n=200) was 0.0%. 2. The positive rate of residual sulfamethazine which was detected by EEC-4 plate in the urine (n=126), the liver(n=98), the kidney(n=72), the spleen (n=68) and the lung(n=48) were 63%, 49%, 36%, 34% and 24%, respectively. 3. By EEC-4 plate method, the positive detection rates of the urine were 53.0% in BS(pH 6.0), 29.0% in BS(pH 7.2), 11.5% in BS(pH 8.0) and 13.0% in ML(pH 8.0) medium, that of the liver 41.5% in BS(pH 6.0), 22.0% in BS(pH 7.2), 6.5% in BS(pH 8.0) and 5.0%, in ML (pH 8.0) medium, that of the lung 21.0% in BS(pH 6.0), 9.5%, in BS(pH 7.2) and 8.5% in BS(pH 8.0) medium, and that of the kidney 31.5% in BS(pH 6.0), 14.5% in BS(pH 7.2), 20.0% in BS(pH 8.0) and 3.0% in ML(pH 8.0) medium. In the spleen, only in BS(pH 6.0) medium the positive rate was detected as 33.5 %. 4. The positive rates of samples which shown TLC-positive detected by EEC-4 plate method were 53.9% in no band, 77.8% in one band, 80.9% in two bands, 66.7% in three bands, respectively. In conclusion, the EEC-4 plate method could be applied for the detection of residual antibiotics in samples which shown as out of standard Rf values by TLC-method (SOS kit).

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.10
• /
• pp.1517-1524
• /
• 2007

The [$^2H_5$]phenylalanine model was compared with the [1-$^{13}C$]leucine method to determine whole body protein synthesis (WBPS) and degradation (WBPD) in sheep fed at two levels. The animals were fed either 103 (M-diet) or 151 (H-diet) kcal $ME/kg^{0.75}/day$ once daily in a crossover design for 21 days each. The isotope dilutions were simultaneously conducted as a primed-continuous infusion of [$^2H_5$]phenylalanine, [$^2H_2$]tyrosine and [1-$^{13}C$]leucine on each dietary treatment. The WBPS and WBPD calculated from the [$^2H_5$]phenylalanine model were lower (p = 0.009 and p = 0.003, respectively) than those calculated from the [1-$^{13}C$]leucine method. The WBPS tended to be higher (p = 0.08) and WBPD was numerically higher (p = 0.33) for H-diet than M-diet in the [$^2H_5$]phenylalanine model, whereas the WBPS was numerically higher (p = 0.37) for H-diet and WBPS remained similar (p = 0.79) between diets in the [1-$^{13}C$]leucine method. However, the absolute values and the directions of WBPS as well as WBPD from M-diet to H-diet were comparable between the [$^2H_5$]phenylalanine model and [1-$^{13}C$]leucine method. Moreover, the values vary depending on the use of the respective amino acid contents in the carcass protein when calculating WBPS and WBPD. Therefore, it is concluded that the [$^2H_5$]phenylalanine model could be used as an alternative to the [1-$^{13}C$]leucine method for the determination of WBPS and WBPD in sheep.

• The KIPS Transactions:PartC
• /
• v.17C no.5
• /
• pp.415-426
• /
• 2010

CAS is an access control system by which only legal users can access contents. IPTV is a spotlighted system that uses CAS. H.264/SVC is a coding standard that provides a scalable coding method by which users who are in various network environments and have various devices can receive the contents. In this method, the contents are coded in a layered structure to make users choose the quality of the receiving contents. Therefore, contents provider should be able to control users to access only appropriate contents according to their subscriptions. The structure of CAS being employed in many applications is not suitable to control access for H.264/SVC. In this paper, we provide an efficient access control method and a key management method for H.264/SVC contents using CAS.

• International Journal of Automotive Technology
• /
• v.8 no.4
• /
• pp.493-504
• /
• 2007

This paper proposes a stereo vision-based forward obstacle detection and distance measurement method. In general, stereo vision-based obstacle detection methods in automotive applications can be classified into two categories: IPM (Inverse Perspective Mapping)-based and disparity histogram-based. The existing disparity histogram-based method was developed for stop-and-go applications. The proposed method extends the scope of the disparity histogram-based method to highway applications by 1) replacing the fixed rectangular ROI (Region Of Interest) with the traveling lane-based ROI, and 2) replacing the peak detection with a constant threshold with peak detection using the threshold-line and peakness evaluation. In order to increase the true positive rate while decreasing the false positive rate, multiple candidate peaks were generated and then verified by the edge feature correlation method. By testing the proposed method with images captured on the highway, it was shown that the proposed method was able to overcome problems in previous implementations while being applied successfully to highway collision warning/avoidance conditions, In addition, comparisons with laser radar showed that vision sensors with a wider FOV (Field Of View) provided faster responses to cutting-in vehicles. Finally, we integrated the proposed method into a longitudinal collision avoidance system. Experimental results showed that activated braking by risk assessment using the state of the ego-vehicle and measuring the distance to upcoming obstacles could successfully prevent collisions.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.3
• /
• pp.257-266
• /
• 1999

The aim of this paper is to suggest a design method of the optimal multivariable $H_{\infty}$ control system using genetic algorithm (GA). This $H_{\infty}$ control system is designed by applying GA to the optimal determination of weighting functions and design parameter $\gamma$ that are given by Glover-Doyle algorithm which can design $H_{\infty}$ controller in the state space. The first method to do this is that the gains of weighting functions and $\gamma$ are optimized simultaneously by GA with tournament method. And the second method is that not only the gains and $\gamma$ but also the dynamics of weighting functions are optimized at the same time by eA with roulette-wheel method. The effectiveness of this $H_{\infty}$ control system is verified by computer simulation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.5
• /
• pp.1095-1105
• /
• 1993

Shape rolling processes to produce H-section beams are numerically simulated by the simplified three-dimensional finite element method. The 2-dimensional finite element method, used for the generalized plane strain condition, is combined with the slab method. Computer simulation results of the 19-passes in H-section beam rolling in practice include the grid distortions, the cross-sectional area changes, the roll separating forces, and the roll torques. Also, the amount of side spread can be found during the multi-pass rolling simulations. The finite element mesh system is remeshed with I-DEAS whenever the billet distorts severely. This study would contribute to CAD/CAM of shape rolling process through the optimal roll pass schedule.