• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.4
• /
• pp.166-169
• /
• 2001

6H-SiC bulk crystals were grown by sublimation method with different conditions in term of gaseous pressures ad source temperatures. In order to optimize the growth rate, pressure at growth period and source and substrate temperatures were investigated as experimental variables. the results were compared with each other and finally the optimum growth conditions were discussed. Furthermore the relation of the growth steps and defects formation was evaluates in the point of reducing the micropipes. Subsequently the growth steps and defects formation was evaluated in the point of reducing the micropipes. Subsequently the growth steps were observed leading to the lower step height with the lower growth rate.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.6
• /
• pp.294-297
• /
• 2019

New insights about macro-step formation has been investigated. The phenomena of surface instability caused by the interaction between step flow and fluid flow was describe in mechanical way. The rotation of the seed crystal in a clockwise direction was applied with a speed varied from 30 to 200 rpm during the TSSG process on the Si- and C-faces 4H-SiC. The macro-steps were formed along the two specific directions at different locations on the crystal for each, i.e., [10-10] or [01-10] directions or both. From the results, it is suggested that the macro-steps were generated from the micro-steps by interaction between step flow and fluid flow during the rotation of seed crystal. Furthermore, The fluid flow could be effective to control the micro- and/or macro-step behavior during solution growth.

• Journal of Power System Engineering
• /
• v.14 no.6
• /
• pp.41-46
• /
• 2010

Acoustic emission (AE) technique is a well-known non-destructive test technique. Fatigue crack growth test was performed using SM53C to check up the AE signal occurred by crack growth, so AE system was used to detect the crack signal. Features calculated by the AE signals were analyzed to evaluate the steps divided the crack growth into three. The steps, initiation, growth and breaking, were separated by velocity of the crack growth. Time waveform and power spectrum were created by the AE signal of each one of the steps and compared. In the feature domains, it was found that AE values changed rapidly as the velocity of the crack increasing.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.1
• /
• pp.44-49
• /
• 1995

Abstract The surface of 6H - SiC bulk crystal grown by sublimation process was investigated by optical microscope observation. Since, in the 6H crystal growing, the crystal had the habitual step growth attitude such that the lateral growth rate along the random a - axis orientation was higher than that along the c - axis of the growth direction, then many steps were developed. There were, also, many micropipes on the surface in the form of as-like large voids. However, they were differenciated with pores and cross- sectional shape of them were close to the circle. In this study, many micropipes, planar defects and the growth steps appeared on the grown crystal surface were investigated.

• Environmental Engineering Research
• /
• v.25 no.1
• /
• pp.1-17
• /
• 2020

With benefits to the human health, environment, economy, and energy, anaerobic digestion (AD) systems have attracted remarkable attention within the scientific community. Anaerobic digestion system is created from (bio)reactors to perform a series of bi-metabolism steps including hydrolysis/acidogenesis, acetogenesis, and methanogenesis. By considering the physical separation of the digestion steps above, AD systems can be classified into single-stage (all digestion steps in one reactor) and multi-stage (digestion steps in various reactors). Operation of the AD systems does not only depend on the type of digestion system but also relies on the interaction among growth factors (temperature, pH, and nutrients), the type of reactor, and operating parameters (retention time, organic loading rate). However, these interactions were often reviewed inadequately for the single-stage digestion systems. Therefore, this paper aims to provide a comprehensive review of both single-stage and multi-stage systems as well as the influence of the growth factors, operating conditions, and the type of reactor on them. From those points, the advantages, disadvantages, and application range of each system are well understood.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.2
• /
• pp.194-202
• /
• 1996

Transmission electron microscopy has been used to characterize the dislocation structure in hot-pressed titanium diboride. The thin foil samples were prepared by the conventional ion beam thinning technique and reveal the main features associated with the dislocations ; low-angle grain boundaries with dislocation arrays, high-angle grain boundaries with ledges/steps on the boundary planes. The ledges/steps on the grain boundaries were characterized as the origin of defect structures such as dislocation formation or crack propagation near grain boundaries. A fraction of the high angle grain boundaries contained periodic arrays of grain boundary dislocations. The Burger's vectors of the dislocations in the $TiB_{2}$specimens were determined.

• Journal of the Korean Society of Systems Engineering
• /
• v.14 no.2
• /
• pp.49-57
• /
• 2018

The main objective of this paper is come up with methodology approach for FPGA-based system in verification and validation lifecycle regarding software reliability using system engineering approach. The steps of both reverse engineering and re-engineering are carried out to implement an FPGA-based of safety critical system in Nuclear Power Plant. The reverse engineering methodology is applied to elicit the requirements of the system as well as gain understanding of the current life cycle and V&V activities of FPGA based-system. The re-engineering method is carried out to get a new methodology approach of software reliability, particularly Software Reliability Growth Model. For measure the software reliability of a given FPGA-based system, the following steps are executed as; requirements definition and measurement, evaluation of candidate reliability model, and the validation of the selected system. As conclusion, a new methodology approach for software reliability measurement using software reliability growth model is developed.

• Korean Journal of Poultry Science
• /
• v.27 no.1
• /
• pp.31-35
• /
• 2000

This study was investigated to observe Lactobacillus spp. population of poultry digestive organ, duodenum, ilium, cecum and colon by growing steps and to select of valuable lactobacilli as probiotics. Two strains of male broiler commercial chickens, Hybrid and Ross, were used to evaluate population of Lactobacillus spp. in intestinal tracts. Three strains of Lactobacillus were identified, and bile salts environment. The number of lactovacilli was the lowest in duodenum compared to other intestinal tracts which had similar population. Population of Lactobacillus was maintained constantly regardless growing steps after one week of age. Identification of Lactobacillus from cecum resulted in L.reuteri BC5, L. crispatus BC7, L.reuteri BC9. All strains was depressed in pH 1 and 2, although two strains could survive for one hour at pH 2. And they could survive at pH 4 for 4hours. In bile salts tolerance, L.reuteri BC5, L.crispatus BC7 were maintained for 2 hours, but the growth reduced from 2hours. Growth of L.reuteri BC9 was increased continuously. In conclusion, Lactobacillus of intestinal tracts were established at first week, and maintained constant population. They were influenced on severe acidic condition and bile salts. Cecal Lactobacillus has different growth charcteristics by strains.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.6
• /
• pp.547-552
• /
• 2014

This study was conducted to evaluate the influence of fertilization on characteristics of growth and accumulation of anthocyanin in fruit of Omija (Schisandra chinensis Baillon). Nitrogen supply mainly affected growth of fruit and the anthocyanin content in Omija respective of vegetative growth steps. The anthocyanin content in fruit was significantly low in high N supply and non-fertilization. The conjunctive supply of nitrogen and compost tea resulted in a higher anthocyanin content of fruit, total nitrogen content of leaf, and nitrate in soil. This result implies that nitrogen supply to Omija plant, affects the accumulation patterns of anthocyanin in different ways, e.g. it delays the quantitative biosynthesis at low nitrogen supply during fruit maturation or enhances anthocyanin degradation during the final maturation steps.

• Journal of the Korean institute of surface engineering
• /
• v.21 no.2
• /
• pp.68-75
• /
• 1988

To know the growth behavior of Conductive polyaniline file, the anodic oxidation of anilien on a platiunm in aqueous sulfuric acid solution has been studied. Cyclic votammetry and currenttime transisents method used to investigate the anodic oxidation of aniline to polyaniline films on a platinum. The oxidation of aniline is shown to occur in several steps dependent on the potential. it the phase growth resembles the deposition of a metal film.