• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.78.1-78.1
• /
• 2014

An ionization front (IF) surrounding an H II region is a sharp interface through which a cold neutral gas makes transition to a warm ionized phase by absorbing UV photons from central massive stars. We investigate the structure and instability of a plane-parallel D-type IF threaded by magnetic fields parallel to the front. We find that magnetic fields increase the maximum propagation speed of the IFs, while reducing the expansion factor, defined as the density ratio of neutral to ionized phases. IFs become unstable to distortional perturbations due to gas expansion across the fronts, exactly analogous to the Darrieus-Landau instability of ablation fronts in terrestrial flames. The growth rate of the IF instability is proportional linearly to the perturbation wavenumber as well as the upstream flow speed. The IF instability is stabilized by gas compressibility and becomes completely quenched when the front is D-critical. The instability is also stabilized by magnetic pressure when the perturbations propagate in the direction perpendicular to the fields. When the perturbations propagate in the direction parallel to the fields, on the other hand, it is magnetic tension that reduces the growth rate, completely suppressing the instability when ${\beta}$ < 1.5, with ${\beta}$ denoting the square of the ratio of the sound speed to the Alfven speed in the pre-IF region. When the front experiences an acceleration, the IF instability cooperates with the Rayleigh-Taylor instability to make the front more unstable. We discuss potential effects of IF instability on the evolution and dynamics of IFs in the interstellar medium.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.10 no.1
• /
• pp.95-105
• /
• 2006

The speed of hard disk which is based on mechanical operation is more slow than processor. The growth of processor speed is rapid by semiconductor technology, but the growth of disk speed which is based on mechanical operation is not enough. Buffer cache in main memory and disk cache in disk controller have been used in computer system to solve the speed gap between processor and I/O subsystem. In this paper, an efficient buffer cache and disk cache management scheme was proposed to restrict duplicated disk block between buffer cache and disk cache. The performance of the proposed algorithm was evaluated by simulation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.1
• /
• pp.114-121
• /
• 2004

Frictional heating in brakes causes thermoelastic distortion of the contacting bodies and hence affects the contact pressure distribution. The resulting thermo-mechanical coupling can cause thermoelastic instability (TEI) if the sliding speed is sufficiently high, leading to non-uniform heating called hot spots and low frequency vibration known as hot judder. The vibration of brakes to the known phenomenon of frictionally-excited thermoelastic instability is estimated studying the interface temperature and pressure evolution with time. A simple model has been considered where a layer with half-thickness$\alpha$slides with speed V between two half-planes which are rigid and non-conducting. The advantage of this properlysimple model permits us to deduce analytically the critical conditions for the onset of instability, which is the relation between the critical speed and the growth rate of the interface temperature and pressure. Symmetrical component of pressure and temperature distribution at the layer interfaces can be more unstable than antisymmetrical component. As the thickness $\alpha$ reduces, the system becomes more apt to thermoelastic instability. For perturbations with wave number smaller than the critical$m_{cr}$ the temperature increases with m vice versa for perturbations with wave number larges than $m_{cr}$ , the temperature decreases with m.

• Journal of Bio-Environment Control
• /
• v.7 no.1
• /
• pp.9-14
• /
• 1998

Air current speeds were controlled of 0.3, 0.5, 0.7 and 0.9 m.s$^{-1}$ to investigate the effects of air current speeds on the growth of eggplant plug seedlings (Solanum melongena L.) in a wind tunnel under artificial lighting. Growth of plug seedlings was influenced by the magnitude of air current speed and the traveling distance of regulated air flow. Stem length. ratio of length to diameter in stem, plant height .and number of leaves of plug seedlings decreased with the increasing air current speed and were significantly different at 5% level. Net photosynthetic rates of plug stand increased with the increasing air current speed and took a maximum value at the air current speed of 0.7~09 m.s$^{-1}$ . Stem diameter decreased and leaf area increased with the traveling distance of regulated air flow. Fresh weight and T/R ratio of dried weight were not influenced by the air current speed. Optimum control for microclimates inside the plug stand is needed to produce the uniform growth and high quality of plug seedlings in a semi-closed plant Production system under artificial lighting.

• Journal of the Society of Disaster Information
• /
• v.19 no.3
• /
• pp.608-623
• /
• 2023

Purpose: Recently, the number of logistics warehouses has been on the rise. In addition, as the number of such logistics warehouses increases, number of fire accidents also increases every year, increasing the importance of preventing fires in large logistics warehouses. Method: investigated aspirating smoke detectors that are emerging as adaptive fire detectors in logistics warehouses. Then, through fire simulation (FDS), logistics warehouse modeling was conducted to compare and analyze the detection speed of general smoke detectors and aspirating smoke detectors according to four stages of fire growth and three locations of fire in the logistics warehouse. Result: Growth speed in Slow-class fires and Mediumclass fires, the detection speed of aspirating smoke detectors was faster regardless of the location of the fire. However, in Fast-class fires and Ultra-Fast-class fires, it was confirmed that the detection speed of general smoke detectors was faster depending on the location of the fire. Conclusion: It was confirmed that the detection performance of the aspirating smoke detector decreased as the fire growth speed increased and the location of the fire occurred further than the receiver of the aspirating smoke detector. Therefore, even if an aspirating smoke detector is installed in a warehouse that stores combustibles with high fire growth rates, it is judged that an additional smoke detector is attached far away from the receiver of the general smoke detector to increase fire safety.

• KSBB Journal
• /
• v.15 no.3
• /
• pp.280-284
• /
• 2000

The simple imcroprocessor device was provided for the control of dissolved oxygen(DO) level. The DO analog signal output from fementer was used as a measurement variable and the agitation speed of fermenter was used as a manipulatio variable. Agitation speed was manipulated to maintain DO level above 10% of saturation condition during cell growth period with microprocessor. Since the experimental resultsshowed that the DO level was maintained above 10% and agitation speed was inverse proportional to DO level ithis simple control device can be used for the DO control of fermenter.

• Journal of the Korean Society of Industry Convergence
• /
• v.4 no.2
• /
• pp.199-205
• /
• 2001

With the growth of BiCMOS technology in ASIC design, the issue of analyzing fault characteristics and testing techniques for BiCMOS circuits become more important In this paper, we analyze the fault models and characteristics of high speed full-swing BiCMOS circuits and the DFT technique to enhance the testability of full-swing high speed BiCMOS circuits is discussed. The SPICE simulation is used to analyze faults characteristics and to confirm the validity of DFT technique.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.12 no.2
• /
• pp.111-122
• /
• 1992

This experiment was conducted to determine the effects of spring seeding dates on the growth, yield and quality of early and late maturing spring oat (Auena sativa L.) cultivars on the forage experimental field, College of Agriculture, Seoul National University, Suwon from March to June, 1991. The experiment was arranged as a split plot with three replications. Oat cultivars, Cayuse and Speed oat, were the main plots, and seeding dates consisted of March 15, 22, 29, April 5 and 12 were the subplots. 1. A 7-day delay in seeding represents approximately 3~8 days being early in heading. The heading date of the early maturing cultivar, Speed oat, was 14 days earlier than that of the late maturing cultivar, Cayuse. 2. The concentrations of Crude protein (CP), Acid detergent fiber (ADF), Neutral detergent fiber (NDF) and zn uitro dry matter digestibility (IVDMD) of the late maturing cultivar, Cayuse, harvested May 29 were 19.6, 30.0, 44.9, and 82.7 %, respectively, but those of the early maturing cultivar, Speed oat, were 14.8. 33.3. 52.3, and 71.2 %, respectively. Chemical analyses of oat forage indicated that the contents of crude protein and lVDMD were increased from March 15 to April 12 seeding, while crude fiber was decreased. 3. Theaverage dry matter, IVDDM and CP yields of oats harvested May 29 were 2,960, 2,435 and 572 kg per ha, respectively with the late maturing cultivar. Cayuse. while the early maturing cultivar, Speed oat, recorded 3,255, 2.298 and 475 kg per ha, respectively. No significant dry matter yield differences were found among the different seeding dates of March 15, 22 and 29 for the two oat cultivars. but a significant yield decrease was found from April 5 seeding. No interactions in dry matter yield were observed between oat cultivars and seeding dates. 4. Maximum Leaf area index (LAI) and Leaf area index duration (LAID) were observed with earlier seeding and the LA1 of Cayuse cultivar was twice or three times as much as that of Speed oat cult~var as the growth progresses. 5. As the seeding date was earlier. the Crop growth rate (CGR) of the late maturing cultivar, Cayuse. was increased continuously. but that of the early maturing cultivar, Speed oat, was declined after May 29. This trend was also found on the Net assimilation rate (NAR) of Speed oat cultivar. The present experiment indicates that spring oats can be successfully produced as forages by seeding in March with early maturing cultivars.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.4 no.1 s.6
• /
• pp.97-106
• /
• 2005

Since traffic engineering in 1950's, 'speed control technology' has experienced tremendous growth and developed constantly. However, speeding remains a major safety concern on many roadways. Many crashes is believed to be the result of driving too fast. Recently the speed reduction device, the speed monitoring display with ITS technologies have developed and introduced in many countries including our nation, Korea. Therefore This paper describes an evaluation of the use of a speed monitoring display, speed limit sign, and school zone sign. Two conditions were evaluated; without installation of Speed Monitoring Display, in Operation of Speed Monitoring Display.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.4
• /
• pp.210-218
• /
• 2013

The sea breeze shows different characteristics compared to land breeze, such as high wind speed and more rapider shift period. One of the major factors affecting plant early growth is wind speed. In the early growth stage, tree growth-rates rise with decreasing wind speed. Thus, the study was performed to identify wind break effects on wind characteristics and tree growth. The wind break used in this study was about 130 meters length and 3 meters height, made up with poly-ethylene (with 40% openness). We installed one vane and fifteen anemographs at three different heights (1, 2 and 3 meters) on the inner and outer wind break areas. The wind characteristic and plant growth data were collected from Jun. 2011 to Oct. over 2012. The wind rose of the Saemangum seawall area presented the north (21.5%) and it was followed by north-west (18.1%), east (14.9%) and north-east (13.7%) and the remainder with other directions. Wind speeds at height were different. The tree height was 159.6 cm at inside and 129.6 cm at outside. The diameter at root-collar was 36.9 mm at inside and 32.6 mm at outside from wind break.