• Earthquakes and Structures
• /
• 제13권1호
• /
• pp.79-87
• /
• 2017

Seismic analysis of local site conditions is fundamental for a reliable site seismic hazard assessment. It plays a major role in mitigation of seismic damage potential through the prediction of surface ground motion in terms of amplitude, frequency content and duration. Such analysis requires the determination of the transfer function, which is a simple tool for characterizing a soil profile by estimating its vibration frequencies and its amplification potential. In this study, numerical simulations are carried out and are then combined with a statistical study to allow the characterization of design sites classified by the Algerian Building Seismic Code (RPA99, ver 2003), by average transfer functions. The mean transfer functions are thereafter used to compute RPA99 average site factors. In this regard, coming up seismic fields are simulated based on Power Spectral Density Functions (PSDF) defined at the rock basement. Results are also used to compute average site factor where, actual and synthetic time histories are introduced. In absence of measurement data, it is found that the proposed approach can be used for a better soil characterization.

• Journal of the Korean Wood Science and Technology
• /
• 제50권4호
• /
• pp.256-271
• /
• 2022

Activated carbon (AC) derived from coconut shells (CS-AC) was obtained through pyrolysis at 700℃ and subsequently activated with H₃PO₄. AC was ground in a Wiley mill several times to form powder particles at particle scales of 80, 100, and 200 meshes. The characterization of the AC was studied using scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), Fourier-transform infrared spectroscopy (FT-IR), and surface area analysis (S_BET). The CS-AC-200 mesh resulted in a higher percentage of mesopores and surface area. This particle size had a larger surface area with angular, irregular, and crushed shapes in the SEM view. The smaller particles had smoother surfaces, less wear, and increased curing depth and ratio of the hardness of the resin composite. Based on the characterization results of the AC, it is evident that CS-AC with a 200 mesh particle size has the potential to be used as a filler in biocomposites.

• 지질공학
• /
• 제15권1호
• /
• pp.41-55
• /
• 2005

이 연구는 물리탐사를 이용하여 청주 화강암을 기반으로 한 지역의 지반특성을 파악하는데 목적이 있으며, 시험지역으로서 충북대학교 건물동을 선정하였다. 또한 시험지역의 동쪽에 위치한 노두에서 관찰되는 소규모의 단층과 관입암의 발달 양상을 물리탐사를 통해 확인하고, 이에 따른 풍화정도를 탐사에서 얻어진 각종 물성자료들과 비교, 파악하였다. 조사지역의 지반은 표준 암반분류표를 이용하여 탄성파 속도 800 m/s를 기준으로 크게 풍화토층과 풍화암층으로 구분되며 이층들은 표준관입시험결과 각각 중-고밀도와 고밀도의 값을 갖는다. 풍화토층은 탄성파속도 500 m/s와 전기비저항 200 ohm-m를 기준으로 불포화/포화 풍화토층으로 세분되며 불포화 층은 지하투과레이다탐사 자료와의 상관해석 결과 건조층과 습윤층으로 더욱 세분할 수 있다. 불포화/포화 풍화토층의 경계는 지하수면의 경계에 해당하는 것으로 지하투과레이다탐사 결과 대략 5～6.2 m에 발달하는 것으로 보이며 이는 시추조사 결과와 잘 일치한다. 그러나 건물 기초의 지지면이 되는 기반암 경계는 파악하기 어려웠다. 신축부지 동편의 노두에서 확인되는 단층 및 관입암은 지하투과레이다탐사 결과에서 신축부지까지 연장되지 않는 것으로 확인된다. 저비저항와 저속도대로 특징되는 노두구간의 풍화등급은 지질공학 조사결과 "완전풍화"에 해당된다.

• Earthquakes and Structures
• /
• 제10권4호
• /
• pp.735-755
• /
• 2016

This article presents a proposed analytical methodology to determine seismic force-resisting system R-values for steel diagrid framed systems. As current model building codes do not explicitly address the seismic design performance factors for this new and emerging structural system, the purpose of this study is to provide a sound and reliable basis for defining such seismic design parameters. An approach and methodology for the reliable determination of seismic performance factors for use in the design of steel diagrid framed structural systems is proposed. The recommended methodology is based on current state-of-the-art and state-of-the practice methods including structural nonlinear dynamic analysis techniques, testing data requirements, building code design procedures and earthquake ground motion characterization. In determining appropriate seismic performance factors (R, ${\Omega}_O$, $C_d$) for new archetypical building structural systems, the methodology defines acceptably low values of probability against collapse under maximum considered earthquake ground shaking.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.324-327
• /
• 2002

For the characterization of arbitrary shaped printed circuit board, lossy transmission line grid model based on SPICE netlist and analytical plane model based on the segmentation method are proposed in this paper. Two methods are compared with an arbitrary shaped power/ground plane. Furthermore, design considerations for the complete power distribution network structure are discussed to ensure the maximum value of the PDN impedance is low enough across the desired frequency range and to guide decoupling capacitor selection.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2006년도 하계학술대회
• /
• pp.153-157
• /
• 2006

본 논문에서는 SoC 공정에 적용 가능한 spiral 인덕터의 특성에 대해 다루었다. 일정한 크기의 인덕터에서 턴 수의 변화에 따른 인덕턴스와 Q-factor의 변화를 보았다. HFSS 프로그램을 사용하여 턴 수와 선로의 폭이 같은 조건하에서 사각형 구조와 팔각형 구조를 갖는 인덕터의 인덕턴스와 Q-factor의 ?냅? 계산하였다. 사각형 구조와 팔각형 구조 모두 선로 폭 보다는 턴 수가 증가할수록 인덕턴스가 증가하였다. 턴 수가 증가할수록 Q-factor의 값은 사각형 구조는 감소한 반면 팔각형 구조는 증가하였다. spiral과 실리콘 사이에 PGS(Patterned Ground Shield)를 삽입하여 인덕턴스 및 Q-factor의 변화를 비교 분석하였다. 그 결과 PGS의 사용으로 사각형 구조와 팔각형 구조에서 턴 수에 따라 Q-factor의 값이 구조에 따라 서로 다른 방향으로 증감하는 것을 확인할 수 있었다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.187-190
• /
• 2007

The Geostationary Ocean Color Imager (GOCI) is under development to provide a monitoring of ocean-color around the Korean Peninsula from geostationary platforms. It is planned to be loaded on Communication, Ocean, and Meteorological Satellite (COMS) of Korea. The GOCI has been designed to provide multi-spectral data to detect, monitor, quantify, and predict short term changes of coastal ocean environment for marine science research and application purpose. The target area of GOCI observation covers sea area around the Korean Peninsula. Based on the nonlinear radiometric model, the GOCI calibration method has been derived. The nonlinear radiometric model for GOCI will be validated through ground test. The GOCI radiometric calibration is based on on-board calibration devices; solar diffuser, DAMD (Diffuser Aging Monitoring Device). In this paper, the GOCI radiometric error propagation is analyzed. The radiometric model error due to the dark current nonlinearity is analyzed as a systematic error. Also the offset correction error due to gain/offset instability is considered. The radiometric accuracy depends mainly on the ground characterization accuracies of solar diffuser and DAMD.

• 한국농공학회지
• /
• 제45권2호
• /
• pp.96-106
• /
• 2003

134 Dutch cone (mechanical cone) and 9 piezocone (electronic cone) penetration tests have been performed in the southwestern part of Korea. In general, Dutch cone results may be different from that of piezocone due to the difference in structure of the cones. 6 Dutch cone and piezocone test data which were obtained at the same point respectively, were analyzed and plotted in soil classification chart proposed by Robertson et. al.(1986, 1990). Cone factors of Dutch cone and piezocone test empirically have been determined using laboratory and field vane test results. Using this cone factors, it was shown that there was good correlation between shear strength estimated using cone resistance and that of laboratory test and field vane tests. It was found that there was a good correlation between cone resistance from Dutch cone and that from piezocone. Relationship formula was also suggested. Dutch cone test provides a useful means for stratigraphic profiling in large project and has some advantage over piezocone in particular situations, such as very soft clay ground and dredged area.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.237-244
• /
• 2002

A comparative study of 134 mechanical (Dutch cone) and 9. electronic cone (Piezocone) penetration data from the southern part of Korea has been performed. In general, Dutch cone results may be different from piezocone results due to the difference in structure of the cones. Cone penetrometer test data were analyzed and plotted in soil classification chart proposed by Robertson et. al.(1986,1990) Cone factors of Dutch cone and piezocone test have empirically been determined using laboratory and field vane test results. Using this cone factors, it was shown that there was good correlation between shear strength estimated using cone resistance and that of laboratory test and field vane tests. It was found that there was a good correlation between cone resistance from Dutch cone and that from piezocone. Dutch cone test provides a useful means for stratigraphic profiling in large project and has some advantage over piezocone in particular situations, such as very soft clay ground and dredged area.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2002년도 추계학술대회 발표 논문집
• /
• pp.75-78
• /
• 2002

CNTs have been grown by the thermal CVD process in which $C_{2}H_{2}$ gas was deposited on the Fe - $Al(OH)_3$ mixture pretreated by mechanochemical treatment with a high energy mixer mill. As the duration time of grinding fer $Fe-(Al(OH)_3$ mixture by the mixer mill increased, amorphous $Al(OH)_3$ and more smaller Fe particles agglomerated into spheres. With unground and ground mixtures of $Fe-Al(OH)_3$, CNTs were grown at $700^{\circ}C$. As a result, CNTs grown on ground mixtures have more uniform diameter and morphology than those of unground mixture. The characterization of $Fe-Al(OH)_3$ mixture and as-grown CNTs were done by XRD, SEM and TEM.