• Journal of Climate Change Research
• /
• v.8 no.3
• /
• pp.213-220
• /
• 2017

The purpose of this study is to analyze effects of Greenhouse Gas (GHG) emission reduction in district energy business mainly based on Combined Heat and Power (CHP) plants. Firstly this paper compares the actual carbon intensity of power production between conventional power plants and district energy plants. To allocate the GHG from CHP plants, two of different methods which were Alternative Generation Method and Power Bonus Method, have been investigated. The carbon intensity of power production in district energy plants ($0.43tonCO_2e/MWh$) was relatively lower than conventional gas-fired power plants ($0.52tonCO_2e/MWh$). Secondly we assessed the cost effectiveness of reduction by district energy sector compared to the other means using TIMES model method. We find that GHG marginal abatement cost of 'expand CHP' scenario (-$134/ton$CO_2$) is even below than renewable energy scenario such as photovoltaic power generation ($87/ton$CO_2$). Finally the GHG emission reduction potential was reviewed on the projected GHG emission emitted when the same amount of energy produced in combination of conventional power plants and individual boilers as substitution of district energy. It showed there were 10.1~41.8% of GHG emission reduction potential in district energy compared to the combination of conventional power plants and individual boilers.

• Environmental and Resource Economics Review
• /
• v.30 no.2
• /
• pp.269-297
• /
• 2021

Bioplastics are attracting attention as a substitute for conventional petroleum-based plastics because they are carbon neutral and can be biodegradable. This study estimated economic and environmental impact of regulating the petroleum-based plastics industry and fostering the bioplastics industry using a Recursive Dynamic CGE Model of the Korean Economy. Results show that the regulation of the conventional plastics industry exhibits a positive environmental impact by reducing greenhouse gases and plastic waste and a negative economic impact with a decrease in GDP. Meanwhile, fostering the bioplastics industry with regulation on conventional plastics industry has similar levels of greenhouse gas and waste reduction effects when there is only regulation on the conventional plastics industry. It is also shown that expanding the production of bioplastics industry offsets existing economic losses as a form of increased GDP. If petroleum-based plastics are replaced through the expansion of bioplastics production, it can contribute to the decoupling of greenhouse gas emissions and plastic waste from economic growth.

• Environmental and Resource Economics Review
• /
• v.30 no.2
• /
• pp.169-205
• /
• 2021

This study quantitatively analyzes the impact of greenhouse gas (GHG) emissions reduction policies on the global economy. To this end, we develop a multi-national and multi-industry static computational general equilibrium model that includes three components-GHG emissions from production, disutility due to GHG emissions, and governments' GHG emissions reduction policies. Then we calibrate the model with the relevant data and solve for the equlibrium using the most recent methodology (exact hat algebra). We find that the strengthening of unilateral GHG emissions reduction policies for each country reduces carbon emissions from domestic producers, but does not necessarily reduce global carbon emissions as production is relocated to other countries. On the other hand, we can reduce GHG emissions when all major countries simultaneously implement the strengthened reduction policies proposed by the OECD (2016). Our results imply that aligned reduction efforts of major countries are necessary to reduce global GHG emissions.

• Economic and Environmental Geology
• /
• v.55 no.6
• /
• pp.617-632
• /
• 2022

In recent years, environmental pollution and determining the main factors causing this pollution have become an important issue. This study investigates the relationship between the agricultural sector and environmental pollution in Azerbaijan for 1992-2018. The dependent variable in the study is the agricultural greenhouse gas emissions (CO₂ equivalent). Eight variables were selected as explanatory variables: four agricultural inputs and four agricultural macro indicators. Unit root tests, ARDL boundary test, FMOLS, DOLS and CCR long-term estimators, Granger causality analysis, and variance decomposition analyses were used to investigate the effect of these variables on agricultural emissions. The results show that chemical fertilizer consumption, livestock number, and pesticide use positively and statistically significantly affect agricultural emissions from agricultural input variables. In contrast, agricultural energy consumption has a negative and significant effect. From agricultural macro indicator variables, it was found that the crop and animal production index had a positive and significant effect on agricultural emissions. According to the Granger causality test results, it was concluded that there are a causality relationship from chemical fertilizer consumption, livestock number, crop and livestock production index variables towards agricultural emissions. Considering all the results obtained, it is seen that the variables that have the most effect on the increase in agricultural emissions in Azerbaijan are the number of livestock, the consumption of chemical fertilizers, and the use of pesticides, respectively. The results from the research will contribute to the information on agricultural greenhouse gas emissions and will play an enlightening role for policymakers and the general public.

• Coupled systems mechanics
• /
• v.12 no.6
• /
• pp.531-537
• /
• 2023

Municipal solid waste landfills are unpredictable bioreactors which in cases of mishandling and bad supervision presents numerous risks. The key to municipal waste landfills is to approach them from the point of prevention of the possible consequences, which means using methods of organized waste disposal, and also utilizing landfill gas, as an unavoidable consequence with disposal of municipal solid waste with a high share of biodegradable organic matter. This paper presents an overview about problems of solid municipal waste management, type and composition of waste, and an overview of waste management condition. Further, the problem of landfill and landfill gasses is described with the calculation models of landfill production, as well as the use of the SWM GHG Calculator and LandGEM software on a specific example of gas production for the central zone at Sarajevo landfill "Smiljevici". Main focus of this thesis is the analysis of potentials of greenhouse gas emission reduction measures from the waste management. Overview of the best available techniques in waste management is presented as well as the methodology used for calculations. Scenarios of greenhouse gas emission reduction in waste management were defined so that emissions were calculated using the appropriate model. In the final section of the paper, its description of the problem of collection and utilization the landfill gas at the sanitary landfill "Smiljevici", and implementation of the system for landfill gas collection and solution suggestion for the gasification and exploitation of gas. Energy, environmental and economic benefits can be accomplished by utilizing municipal solid waste as fuel in industry and energy and moreover by utilizing energy generation from landfill gas, which this thesis emphasizes.

• Journal of Bio-Environment Control
• /
• v.29 no.3
• /
• pp.285-292
• /
• 2020

Because the inner environment of greenhouse has a direct impact on crop production, many studies have been performed to develop technologies for controlling the environment in the greenhouse. However, it is difficult to apply the technology developed to all greenhouses because those studies were conducted through empirical experiments in specific greenhouses. It takes a lot of time and cost to develop the models that can be applicable to all greenhouse in real situation. Therefore studies are underway to solve this problem using computer-based simulation techniques. In this study, a model was developed to predict the inner environment of glass greenhouse using CFD simulation method. The developed model was validated using primary and secondary heating experiment and daytime greenhouse inner temperature data. As a result of comparing the measured and predicted value, the mean temperature and uniformity were 2.62℃ and 2.92%p higher in the predicted value, respectively. R² was 0.9628, confirming that the measured and the predicted values showed similar tendency. In the future, the model needs to improve by applying the shape of the greenhouse and the position of the inner heat exchanger for efficient thermal energy management of the greenhouse.

• Korean Journal of Organic Agriculture
• /
• v.5 no.1
• /
• pp.149-165
• /
• 1996

In order to get some basic datas on environmental friendly funtion against soil and water pollution and safe vegetable production by organic farming, chemical characteristics of soils cultivated by the conventional farming, greengouse cultivation and organic farming and acumulation of NO3--N in chinese cabbage and lettuce were analysed. The highest value of NO3--N in 0-30cm subsoil of organic farming was found among the 3 different farming systems, and it was 3.6 and 6.6 times higher than those of conventional farming in chinese cabbage and lettuce respectively. P2O5 also show high accumulation in the rhizosphere of organic farming compared to convnetional farming. The accumulation of NO3--N and P2O5 in the rhizosphere of organic farming were simial to those of greenhouse cultivation. The NO3- accumulation in chinese cabbage and lettuce by organic farming reach 3224ppm in chinese cabbage and 2543ppm in lettuce and it were 4.7 and 6.4 times higher than those of convnetional farming. It is urgently necessary to introduce the basic standard of IFOAM, EU and FAO/WHO Codex on organic agriculture into korean organic agriculture for operation of environmental friendly system and production of safe vegetable in terms of NO3-.

• New & Renewable Energy
• /
• v.7 no.4
• /
• pp.18-29
• /
• 2011

Biofuls are considered as an option to reduce greenhouse gases emission, increase energy supply diversity and security of supply, as well as an opportunity for job creation and rural development. First of all, biofuls technologies have been promoted as a means for reducing the carbon intensity of the transport sector. Hence, in the last decade biofuels production has been driven by governmental policies. The key instruments widely adopted to foster production and increase consumption have been mandatory blending targets, tax exemptions and sibsidies. As one of the most powerful instruments, biofuel mandates require fuel producers to produce a pre-defined amount (or share) of biofuels and blend them with petroleum fuel. National biofuels mandates are in place 35 countries and partially in place in 6 countries. In this study, we reviewed status of global biofuels policies to reduce greenhouse gases in the European Union, United States and other countires worldwide. Especially, we discussed representative biofuels mandates policies same as Renewable Fuel Standard (RFS, US), Renewable Transport Fules Obligation (RTFO, UK) in transport sector.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.38 no.5
• /
• pp.106-115
• /
• 1996

This study was carried out to provide fundamental data for reuse of resources and prevention of environmental pollution Actual states of environmental pollution by biological production facilities were investigated. Various pollution loads and quantity of wastes from greenhouse and animal housings estimated. In greenhouse contents of investigation were wastes of plastic cover, noise of heater and fan, air pollutant of heater, and wastes of soilless culture system, etc. In animal housings, those were actual state of livestock waste treatment and reuse, pollutant mass unit discharge, noise pollution, and malodorant, etc. The main pollutants discharged from greenhouses were wastes of plastic cover, rockwool, and waste fluid of nutrient solution. Developments of waste disposal methods for plastic cover and rockwool are required. And recycle technique of nutrient solution for soilless culture should be developed and propagated. With the buildup of legal control, pollutant mass discharged from livestock wastes are, on the decrease. The other side, reuse of livestock excreta increased. Most animal housings are located near the dwelling house. Malodorant and noise from animal housings have bad effects on the rural living conditions. So developments of integrated complex for small scale livestock farms are required.

• New & Renewable Energy
• /
• v.9 no.1
• /
• pp.33-43
• /
• 2013

The objective of this paper is to provide a review on the latest development on the main initiative and approaches for the sustainability criteria for biofuels. A large number of national and international initiative lately experienced rapid development in the review of the biofuels targets announced in the European Union (EU), United States (US) and other countries worldwide. The global biofuel targets are likely to have a strong impact on land use and agricultural markets. Although biofuels production provides new options for using agricultural crops, there are environmental, social and economic concerns associated with biofuel production. The diversity of feedstock, large number of biofuels pathway an their complexity lead to a high uncertainty over the greenhouse gas (GHG) performances of biofuels, in terms of GHG emission reductions compared to the fossil fuels, expecially if land use change is involved. This paper describes an overview of current status of ongoing certification initiative in Europe and worldwide for biofuels sustainability. It also provides mandatory requirements as part of an sustainability scheme in EU, United Kingdom, US and international approaches and should be reviewed to introduce based on global trends in Korea.