• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.3
• /
• pp.238-244
• /
• 2000

The complete postembryonic developments of copepodid stages of Paramphiascella vararensis T. Scott(Copepoda: Harpacticoida) are described and illustrated based on specimens cultured in laboratory. The copepodites of P. vararensis feed on powder of one of green macro-algae species Ulva pertusa. Developmental time from copepodid stage to adult (copepodid stage) is about 15 days with culture conditions of 33-34 ppt of salinity, 22-23$^{\circ}$C of temperature and feed on algae powder. Sexual characters of the species are distinct on the copepodid stage. Sexual characters appear in size, antennule, pereiopods of second and bases of the fifth and sixth legs. Males are considerably smaller than females in size. In the antennule, the fourth segment of the male extremely is modified and swollen for female. In the segment number of the endopod of second pereiopod, female has 3 segments while male bears 2 segments. The female has 3 setae while the male bears 2 setae on the inner lobe of basis of fifth leg. In the basis of sixth leg, the female has 2 setae while the male has 3 setae.

• Reproductive and Developmental Biology
• /
• v.30 no.2
• /
• pp.87-92
• /
• 2006

The possibility of producing transgenic embryos expressing the green fluorescence protein (GFP) gene have been evaluated after transfer of exogenous gene into the porcine zygote cytoplasm using the intracytoplasm sperm injection (ICSI) as gene delivery method. For DNA binding to sperm heads, 0.05% Triton X-100 or Lipofectin was used. After injection of the sperm bound to DNA by means of Lipofectin or Triton X-100 triturate, the blastocyst formation rates on day 6 were not significantly different from that of ICSI only group (18.8, 19.2 and 25.3%). In terms of GFP expression, more embryos were in GFP form in Triton X-100 group than in Lipofectin group (40.6 vs 36.4%), while percentage of non-mosaic embryos expressing the GFP gene in all blastomere was higher (P<0.05) in Lipofectin group than in Triton X-100 group (4.2 vs 0.9%). ICSI embryos derived from sperm treated with Lipofectin/DNA complex was transferred into 3 recipients and were collected by uterine flushing on days 5, 7 and 15 after embryo transfer, and then GFP expression was observed by a fluorescence microscopy. Over 26% of the collected embryos were normally expressed GFP gene. These results suggest that foreign gene transfer method with DNA bound sperm caused minimal damage to structure of oocytes that can result to full development of porcine embryos. This was confirmed in this study when the embryos that were transferred after ISCI of DNA bound sperm had a normal development and gene expression until preimplantation.

• Steel and Composite Structures
• /
• v.34 no.5
• /
• pp.681-698
• /
• 2020

The paper addresses contribution to the modeling and optimization of major machinability parameters (cutting force, surface roughness, and tool wear) in finish dry hard turning (FDHT) for machinability evaluation of hardened AISI grade die steel D₃ with PVD-TiN coated (Al₂O₃-TiCN) mixed ceramic tool insert. The turning trials are performed based on Taguchi's L₁₈ orthogonal array design of experiments for the development of regression model as well as adequate model prediction by considering tool approach angle, nose radius, cutting speed, feed rate, and depth of cut as major machining parameters. The models or correlations are developed by employing multiple regression analysis (MRA). In addition, statistical technique (response surface methodology) followed by computational approaches (genetic algorithm and particle swarm optimization) have been employed for multiple response optimization. Thereafter, the effectiveness of proposed three (RSM, GA, PSO) optimization techniques are evaluated by confirmation test and subsequently the best optimization results have been used for estimation of energy consumption which includes savings of carbon footprint towards green machining and for tool life estimation followed by cost analysis to justify the economic feasibility of PVD-TiN coated Al₂O₃+TiCN mixed ceramic tool in FDHT operation. Finally, estimation of energy savings, economic analysis, and sustainability assessment are performed by employing carbon footprint analysis, Gilbert approach, and Pugh matrix, respectively. Novelty aspects, the present work: (i) contributes to practical industrial application of finish hard turning for the shaft and die makers to select the optimum cutting conditions in a range of hardness of 45-60 HRC, (ii) demonstrates the replacement of expensive, time-consuming conventional cylindrical grinding process and proposes the alternative of costlier CBN tool by utilizing ceramic tool in hard turning processes considering technological, economical and ecological aspects, which are helpful and efficient from industrial point of view, (iii) provides environment friendliness, cleaner production for machining of hardened steels, (iv) helps to improve the desirable machinability characteristics, and (v) serves as a knowledge for the development of a common language for sustainable manufacturing in both research field and industrial practice.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.4
• /
• pp.541-548
• /
• 2013

Purpose: Marrow stromal cells (MSCs) have been known for their potential to trans-differentiate into neural and glial cells in vitro and in vivo. To investigate the influence of the developing host environment on the survival and morphological and molecular differentiation, murine MSCs transplanted into the eye of Brazilian opossum (Monodelphis domestica). Methods: Enhanced green fluorescent protein (GFP) - expressing MSCs were transplanted into developing Brazilian opossums. Animals were allowed to survive for up to 4 weeks after transplantation, at which time the eyes were prepared for immunohistochemical analysis. Results: Some transplanted MSCs survived and showed morphological differentiation into neural cells with some processes within the host vitreous chamber. Some transplanted cells expressed class III ${\beta}$-tubulin (TuJ1, a marker for neuronal cells) or glial fibrillary acid protein (GFAP, a marker for glial cells) or Nestin (a marker for neural stem cells). In addition, some transplanted cells were located in ganglion cell layer but did not show morphological and molecular differentiation. Conclusions: Our result show that the most effective stage of development for transplantation into the retina was postnatal day 16, which retinas developmentally corresponded to postnatal day 4-5 days mouse retina based on cell differentiation and lamination patterns. The present findings suggest that the age of the host appears to play a key role in determining cell fate in vivo.

• Proceedings of the KSRS Conference
• /
• 2006.03a
• /
• pp.341-343
• /
• 2006

The current spectral shape matching method (SSMM), developed by Ahn and Shanmugam (2004), relies on the assumption that the path radiance resulting from scattered photons due to air molecules and aerosols and possibly direct-reflected light from the air-sea interface is spatially homogeneous over the sub-scene of interest, enabling the retrieval of water-leaving radiances ($L_w$) from the satellite ocean color image data. This assumption remains valid for the clear atmospheric conditions, but when the distribution of aerosol loadings varies dramatically the above postulation of spatial homogeneity will be violated. In this study, we present the second version of SSMM which will take into account the horizontal variations of aerosol loading in the correction of atmospheric effects in SeaWiFS ocean color image data. The new version includes models for the correction of the effects of aerosols and Raleigh particles and a method fur computation of diffuse transmittance ($t_{os}$) as similar to SeaWiFS. We tested this method over the different optical environments and compared its effectiveness with the results of standard atmospheric correction (SAC) algorithm (Gordon and Wang, 1994) and those from in-situ observations. Findings revealed that the SAC algorithm appeared to distort the spectral shape of water-leaving radiance spectra in suspended sediments (SS) and algal bloom dominated-areas and frequently yielded underestimated or often negative values in the lower green and blue part of the electromagnetic spectrum. Retrieval of water-leaving radiances in coastal waters with very high sediments, for instance = > 8g $m^{-3}$, was not possible with the SAC algorithm. As the current SAC algorithm does not include models for the Asian aerosols, the water-leaving radiances over the aerosol-dominated areas could not be retrieved from the image and large errors often resulted from an inappropriate extrapolation of the estimated aerosol radiance from two IR bands to visible spectrum. In contrast to the above results, the new SSMM enabled accurate retrieval of water-leaving radiances in a various range of turbid waters with SS concentrations from 1 to 100 g $m^{-3}$ that closely matched with those from the in-situ observations. Regardless of the spectral band, the RMS error deviation was minimum of 0.003 and maximum of 0.46, in contrast with those of 0.26 and 0.81, respectively, for SAC algorithm. The new SSMM also remove all aerosol effects excluding areas for which the signal-to-noise ratio is much lower than the water signal.

• Food Science and Preservation
• /
• v.18 no.2
• /
• pp.191-198
• /
• 2011

This study was performed for development of Haetsun Bibimbam as local food and estimated nutritional value of Haetsun Bibimbam. Preference on Bibimbab materials of 503 subjects was surveyed to select ingredients of Haetsun Bibimbab except for Haetsun vegetables. As results of survey, soybean sprout, carrot, shiitake mushroom, and green pumpkin were selected as ingredients of Haetsun Bibimbab. Overall preference of Haetsun Bibimbab made by the ratio of 1:1 of selected ingredients : Haetsun vegetables and 1:1:1 of Acanthopanacis cortex : Kalopanax pictus : Aralia elata was the highest among the samples. As a results of nutritional estimation, total amount and calorie of Haetsun Bibimbab were 404 g and 463.7 kcal, respectively. It contained 16.48 g of protein. 13.99 g of fat, 75.93 g of carbohydrate and 3.1 g crude fiber. The mineral contents of Haetsun Bibimbab shows 91.11 mg of calcium, 133.91 mg of phosphorous, 2.66 mg of iron, 1.314.66 mg of sodium and 444.791 mg of potassium.

• Research in Plant Disease
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2009

Viruses diagnosed on crops including rice plants from farmers or agricultural extension agencies cover the country were 11 species including Broad bean wilt virus 2 (BBWV2) in 2008. Tomato spotted wilt virus (TSWV) was the most important virus having the detection rate of 22.9%. Two viruses of Tomato yellow leaf curl virus (TYLCV) and Tobacco leaf curl virus (TLCV) inducing leaf yellow and curl diseases on tomatoes were occurred newly with the detection rate of 12.2% and 4.0%, respectively, in 2008. Rice stripe virus (RSV) was occurred on 869.5 ha mainly at Jindo and Haenam areas in Jeollanamdo province. At Jindo area, 12 plots were damaged severely with the infected hill rate of 83.8%. At the main production area of oriental melon at Seongju, almost all fruits from whole sale market at Seongju were infected with Cucumber green mottle mosaic virus (CGMMV) as the detection rate of 87%. The areas occurred TSWV in Korea were 25 totally from 2003 including 7 areas newly reported in 2008 including Naju in Jeoallanamdo. TSWV could be reduced as 0.1 % from 5.3% by covering insect proof net in vinyl house after chemical soil sterilization. Tomato yellow leaf curl disease was occurred on April in 2008 at Tongyoung area in Kyeongsangnamdo, and detected continuously at 13 areas, 7 in Kyeongsangnamdo, 4 in Jeollabukdo and 2 in Jejudo. Potato spindle tuber viroid (PSTVd) was occurred abruptly in a confined space of a civil breeding greenhouse and a cultivar evaluation field followed by disuse 17.4 M/T of potato tubers. No PSTVd was detected at 17 fields cultivated the related potatoes to the bred company by RT-PCR.

• Research in Plant Disease
• /
• v.26 no.1
• /
• pp.8-18
• /
• 2020

Red pepper, one of the major economic crops in Korea, is being affected by anthracnose disease caused by Colletotrichum acutatum. To control this disease, an antagonistic bacterial strain, Bacillus subtilis YGB36 identified by 16S rDNA sequencing, physiological and biochemical analyses is used as a biological control agent. In vitro screening revealed that the strain YGB36 possess strong antifungal activity against the pathogen Cylindrocarpon destructans. The strain exhibited cellulase, protease, amylase, siderophore production and phosphate solubility. In vitro conidial germination of C. acutatum was most drastically inhibited by YGB36 cell suspensions (10⁶ cfu/ml) or culture filtrate. Development of anthracnose symptoms was reduced on detached immature green pepper fruits by treatment with cell suspensions, and its control value was recorded as 65.7%. The YGB36 bacterial suspension treatment enhanced the germination rate of red pepper seeds and promoted root development and growth under greenhouse conditions. The in vitro screening of fungicide and insecticide sensitivity test against YGB36 revealed that the bacterial growth was not affected by any of the insecticides, and 11 fungicides out of 21 used. Collectively, our results clearly suggest that the strain YGB36 is considered as one of the potential biocontrol agents against anthracnose disease in red pepper.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.5
• /
• pp.113-123
• /
• 2011

Recently, the global warming problem has arised around world, many nations has set up a various regulations for decreasing $CO_2$. In particular, $CO_2$ emissions reduction effect is very powerful in transport part, so there is a rising interest about development of green car, or electric vehicle in auto industry. For this reason, it is important to make a strategy for charging infra and forcast electric power demand, but it hasn't introduced about demand forecasting electric vehicle. Thus, this paper presents a demand forecasting for electric vehicles using choice based multigeneration diffusion model. In this paper, it estimates innovation coefficient, immitation coefficient in Bass model by using hybrid car market data and forecast electric vehicle market by year using potential demand market through SP(Stated Preference) experiment. Also, It facilitates more accurate demand forecasting electric vehicle market refelcting multigeneration diffusion model in accordance with attribute progress in development of electric vehicle. Through demand forecasting methodology in this paper, it can be utilized power supply and building a charging infra in the future.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.3
• /
• pp.392-399
• /
• 2017

Objective: The objectives were to assess the effects of purified lignin from wheat straw (sodium hydroxide dehydrated lignin; SHDL) on in vitro ruminal fermentation and on the growth performance of feedlot cattle. Methods: In vitro experiments were conducted by incubating a timothy-alfalfa (50:50) forage mixture (48 h) and barley grain (24 h) with 0, 0.25, 0.5, 1.0, and 2.0 mg/mL of rumen fluid (equivalent to 0, 2, 4, 8, and 16 g SHDL/kg diet). Productions of $CH_4$ and total gas, volatile fatty acids, ammonia, dry matter (DM) disappearance (DMD) and digestion of neutral detergent fiber (NDF) or starch were measured. Sixty Hereford-Angus cross weaned steer calves were individually fed a typical barley silage-barley grain based total mixed ration and supplemented with SHDL at 0, 4, 8, and 16 g/kg DM for 70 (growing), 28 (transition), and 121 d (finishing) period. Cattle were slaughtered at the end of the experiment and carcass traits were assessed. Results: With forage, SHDL linearly (p<0.001) reduced 48-h in vitro DMD from 54.9% to 39.2%, NDF disappearance from 34.1% to 18.6% and the acetate: propionate ratio from 2.56 to 2.41, but linearly (p<0.001) increased $CH_4$ production from 9.5 to 12.4 mL/100 mg DMD. With barley grain, SHDL linearly increased (p<0.001) 24-h DMD from74.6% to 84.5%, but linearly (p<0.001) reduced $CH_4$ production from 5.6 to 4.2 mL/100 mg DMD and $NH_3$ accumulation from 9.15 to $4.49{\mu}mol/mL$. Supplementation of SHDL did not affect growth, but tended (p = 0.10) to linearly reduce feed intake, and quadratically increased (p = 0.059) feed efficiency during the finishing period. Addition of SHDL also tended (p = 0.098) to linearly increase the saleable meat yield of the carcass from 52.5% to 55.7%. Conclusion: Purified lignin used as feed additive has potential to improve feed efficiency for finishing feedlot cattle and carcass quality.