• Computers and Concrete
• /
• v.33 no.4
• /
• pp.373-384
• /
• 2024

In this study, a novel mountain train system was developed that can run along a steep gradient of 180 ‰ and sharp curve with a minimum radius of 10 m. For this novel mountain train, an embedded precast concrete rack rail track was implemented to share the track with an automobile road and increase constructability in mountainous regions. The embedded rack rail track is connected to a hydraulically stabilized base (HSB) layer with shear anchors, which must have sufficient longitudinal resistance because they bear most of the traction forces originated from the rack rail and longitudinal loads owing to the steep gradient. In addition, the damage to the shear anchor parts, including the surrounding concrete, must be strictly limited under the service load because the maintenance of shear anchors inside the track is extremely difficult after installation. In this study, the focus was made on the shear anchor behavior and design an embedded rack rail track, considering the serviceability and ultimate limit states. Accordingly, the design loads for mountain trains were established, and the serviceability criteria of the anchor were proposed. Subsequently, the resistance and damage of the shear anchors were evaluated and analyzed based on the results of several finite element analyses. Finally, the design method of the shear anchors for the embedded rack rail track was established and verified.

• Smart Structures and Systems
• /
• v.21 no.4
• /
• pp.449-467
• /
• 2018

In this paper, a theoretical and numerical study on bridge simultaneous damage detection procedure for identifying both the system parameters and input excitation mass, are presented. This method is called 'Adjoint Variable Method' which is an iterative gradient-based model updating method based on the dynamic response sensitivity. The main advantage of proposed method is inclusion of an analytical method to augment the accuracy and speed of the solution. Moving mass is a model which takes into account the inertia effects of the vehicle. This interaction model is a time varying system and proposed method is capable of detecting damage in this variable system. Robustness of proposed method is illustrated by correctly detection of the location and extension of predetermined single, multiple and random damages in all ranges of speed and mass ratio of moving vehicle. A comparison study of common sensitivity and proposed method confirms its efficiency and performance improvement in sensitivity-based damage detection methods. Various sources of errors including the effects of measurement noise and initial assumption error in stability of method are also discussed.

• Journal of Korean Society of Forest Science
• /
• v.107 no.3
• /
• pp.278-286
• /
• 2018

This study examined the damage characteristics through investigation for a total of 10 factors (longitudinal position, crossing position, soil type, collecting well volume, outlet position, water apron material, waterway existence, pipe culvert diameter, pipe culvert gradient, pipe culvert height) affecting outlet damages of forest road cross drainage for forest roads in the Research Forest of Kangwon National University. We predicted outlet damages of forest road cross drainage for forest roads using a discriminant analysis Results showed that longitudinal position, crossing position, soil type and pipe culvert height did not affect damages caused to forest road cross drainage. Most influential factors affecting outlet damages were outlet position, waterway existence, pipe culvert diameter, pipe culvert gradient and collecting well volume, respectively. The discriminant ratio calculated from the developed discriminant function was 68.8% which is reasonably reliable.

• Computers and Concrete
• /
• v.12 no.2
• /
• pp.229-241
• /
• 2013

The objective of this study is to reveal the sufficiency of neural networks (NN) as a securer, quicker, more robust and reliable method to be used in seismic assessment of existing reinforced concrete buildings. The NN based approach is applied as an alternative method to determine the seismic performance of each existing RC buildings, in terms of damage level. In the application of the NN, a multilayer perceptron (MLP) with a back-propagation (BP) algorithm is employed using a scaled conjugate gradient. NN based model wasd eveloped, trained and tested through a based MATLAB program. The database of this model was developed by using a statistical procedure called P25 method. The NN based model was also proved by verification set constituting of real existing RC buildings exposed to 2003 Bingol earthquake. It is demonstrated that the NN based approach is highly successful and can be used as an alternative method to determine the seismic performance of each existing RC buildings.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.6
• /
• pp.914-922
• /
• 2003

In this paper, the strain localization of voided ductile material has been analyzed by nonlocal plasticity formulation in which the yield strength not only depends on an equivalent plastic strain measure (hardening parameter), but also on the Laplacian thereof. The gradient terms in yield criterion show an important role on modeling strain-softening phenomena of material. The influence of the mesh size on the elastic -plastic deformation behavior and the effect of the characteristic length parameter for localization prediction are also investigated. The proposed nonlocal plasticity shows that the load -strain curves converge to one curve. Results using nonlocal plasticity also exhibit the dependence of mesh size is much less sensitivity than that for a corresponding local plasticity formulation.

• Steel and Composite Structures
• /
• v.49 no.1
• /
• pp.65-79
• /
• 2023

This paper presents a development of empirical evaluations, which can be used to evaluate the damage of fiber-reinforced concrete composites (FRC) wall subjected to close-in blast loads. For this development, a combined application of numerical simulation and machine learning approaches are employed. First, finite element modeling of FRC wall under blast loading is developed and verified using experimental data. Numerical analyses are then carried out to investigate the dynamic behavior of the FRC wall under blast loading. In addition, a data set of 384 samples on the damage of FRC wall due to blast loads is then produced in order to develop machine learning models. Second, three robust machine learning models of Random Forest (RF), Support Vector Machine (SVM), and Extreme Gradient Boosting (XGBoost) are employed to propose empirical evaluations for predicting the damage of FRC wall. The proposed empirical evaluations are very useful for practical evaluation and design of FRC wall subjected to blast loads.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.5
• /
• pp.20-30
• /
• 2003

This study is aimed at establishing the categories and items for ecological assessment and evaluation of the environmental friendliness of golf courses in the capital region of Korea. The categories and items for the assessment have been derived based on the existing literature and interviews with golf experts. This study covers 32 golf courses in the capital region of Korea that are available in terms of data and on-site surveys. In order to conduct a comprehensive assessment of the environmental friendliness of the golf courses, the assessment area was divided into 4 categories that include a total of 14 sub-categories. The 4 categories encompass 1) location, 2) topography, 3) vegetation, and 4) construction. As its sub-categories, the location category includes current land use and zoning in the National Land Use Management Law. Topography has 2 sub-categories in the damage ratio of existing topography, gradient, cut area, and slope height. The assessment of vegetation is largely based on site surveys in the categories of preservation of the existing vegetation, the use of natural resources and existing trees, the component ratio of native tree species, the multi-layered structure of vegetation, and the utilization of water purification plants. In the aspect of construction, afforestation on tile slopes and the utilization of existing surface soil were evaluated. The examination of comparative analysis among the 10 items as a ratio measure showed that the scores were low in the sub-categories of current land we, the use of existing trees, and the multi-layered structure of vegetation. However, the rating results were satisfactory in the 2 sub-categories including cut area, and the utilization of native tree species. Those proved to be contributing factors in the ecological health of the golf courses. According to correlation analysis of the 10 items to the overall ecological rating of each golf course, the sizes of the 32 golf courses were mainly affected by the damage ratio of existing topography, gradient, preservation of vegetation and slope height. This study has the initiative to conduct an ecological assessment of golf courses in the country based on site surveys. The study results revealed that location factors such as current land use, damage ratio of topography and gradient and topographical factors were the main factors affecting the environmental friendliness of golf courses. This indicates indicating the significance of these factors in the future construction practices of golf courses. Furthermore, this study raises the need for follow-up studies to establish more detailed assessment criteria and to develop assessment techniques for areas such as slope afforestation and water purification plants that need a qualitative approach.

• Journal of Korean Society of Forest Science
• /
• v.106 no.3
• /
• pp.362-369
• /
• 2017

This study was carried out to provide basic data for active control of the anticipated damage through investigation and analysis of geographical and spatial occurrence distribution of oak wilt disease area. The damage of oak wilt disease was analyzed by investigating all the damage trees caused by oak wilt disease from 2011 to 2015 in three areas of Gwangtan-myeon, Paju-si, Gyeonggi -do. As a result, the closer to the ridge the more damage of the oak wilt was generated. Therefore, it is necessary to select the central management area from 0 to 40 m based on the ridge line for more effective control, and to intensively control the area. Also, it is difficult to predict the occurrence of damage by the slope because the damage situation represent differently by the region. By the diameter class, it was analyzed that the number of damaged trees was the largest in the average diameter class with the most number of the trees in each region.

• The Journal of the Korean Society for Microbiology
• /
• v.34 no.5
• /
• pp.423-433
• /
• 1999

A novel bacteriophage, designated as VPP97, that infects the strains of Vibiro parahaemolyticus (hallophilic, Gram-negative bacterium) isolated most commonly from marine environments, has been discovered, and several of its properties have been determined. The plaques were clear and sized $0.6{\sim}1.0\;mm$ in diameter. The virion forms a single band on 70% sucrose gradient and ${\rho}1.50$ CsCl gradient by sucrose gradient centrifugation and CsCl gradient centrifugation respectively. It has a hexagonal head and a relatively long tail, as shown by electron microscopy. Vibrio alginolyticus, Vibrio fluvialis and Vibrio furnissii were also sensitive to this phage. It was almost totally inactivated at $70^{\circ}C$ and at pH below 5 or over 10. The nucleic acid of VPP97 is composed of DNA. The VPP97 had 9 specific structural proteins sized between 21.5 kDa and 97.4 kDa on SDS-PAGE. When V. parahaemolyticus cultures were treated with either phage VPP97 or one of the several antibiotics for 2 hours, the viable number of V. parahaemolyticus treated with the phage VPP97 is lower than that treated with chloramphenicol, erythromycin or penicillin, but not lower than that treated with tetracycline. Mice that have responded to the phage treatment revealed the lower numbers of V. parahaemolyticus in small intestine and less damage on small intestine compared to the untreated mice. Therefore, we suggest that the phage treatment appears effective to the infection by V. parahaemolyticus.

• Wind and Structures
• /
• v.34 no.2
• /
• pp.185-197
• /
• 2022

This study aimed to analyze the wind-induced mechanical energy (WME) of a proposed super high-rise and long-span transmission tower-line system (SHLTTS), which, in 2021, is the tallest tower-line system with the longest span. Anew index - the WME, accounting for the wind-induced vibration behavior of the whole system rather than the local part, was first proposed. The occurrence of the maximum WME for a transmission tower, with or without conductors, under synoptic winds, was analyzed, and the corresponding formulae were derived based on stochastic vibration theory. Some calculation data, such as the drag coefficient, dynamic parameters, windshielding areas, mass, calculation point coordinates, mode shape and influence function, derived from wind tunnel testing on reducedscale models and finite element software were used in calculating the maximum WME of the transmission tower under three cases. Then, the influence of conductors, wind speed, gradient wind height and wind yaw angle on WME components and the energy transfer relationship between substructures (transmission tower and conductor) were analyzed. The study showed that the presence of conductors increases the WME of transmission towers and changes the proportion of the mean component (MC), background component (BC) and resonant component (RC) for WME; The RC of WME is more susceptible to the wind speed change. Affected by the gradient wind height, the WME components decrease. With the RC decreasing the fastest and the MC decreasing the slowest; The WME reaches the its maximum value at the wind yaw angle of 30°. Due to the influence of three factors, namely: the long span of the conductors, the gradient wind height and the complex geometrical profile, it is important that the tower-line coupling effect, the potential for fatigue damage and the most unfavorable wind yaw angle should be given particular attention in the wind-resistant design of SHLTTSs