• 한국지반공학회논문집
• /
• 제29권1호
• /
• pp.93-107
• /
• 2013

입상체의 열전도도 산정에 관한 연구는 다공질 매질이나 지반공학에서 다양하게 사용될 수 있다. 입상체의 열전도도 산정은 입자들 사이의 에너지 관계에 대한 모사를 통해 "유효 열전도도"를 획득하는 것으로 발전하였다. 본 연구는 불포화토의 유효 열전도도를 산정하기 위해 3차원 개별 요소법을 이용하여 입자를 생성하고 기존 네트워크 모델을 수정하여 적용하였다. 수정된 네트워크 모델을 검증하기 위해 3가지 다른 크기의 글라스 비즈와 주문진사를 이용하여 실내시험을 통해 흙-수분 특성 곡선과 포화도에 따른 시료의 열전도도를 산정하였다. 수정된 네트워크 모델에서는 흙-수분 특성 곡선을 사용하여 입자 사이의 평균 유효 열전달 실린더 반경을 조정하고 모델에 적용하였다. 일련의 실내시험과 수정된 네트워크 모델을 사용하여 결과를 비교한 결과, 흙-수분 특성 곡선을 적용한 네트워크 모델은 주어진 불포화 조건에서 입상체 시료의 유효 열전도도를 합리적으로 모사할 수 있는 것으로 나타났다. 또한, 포화상태의 유효 열전달 실린더 반경 계수로 정규화한 예측식을 제안하였다. 제안한 예측식을 통해 기존 네트워크 모델을 사용하여 불포화 상태에서 입상체의 유효 열전도도를 산정할 수 있다.

• 한국지반환경공학회 논문집
• /
• 제21권1호
• /
• pp.5-12
• /
• 2020

지진원으로부터 전파되는 진동은 거리에 따른 감쇠와 지형 혹은 지질구조에 따라 지역마다 다른 증·감폭 특성을 가진다. 지진원에서 기반암까지의 전파되는 진동은 이격거리에 따른 감쇠의 영향이 크며, 이는 감쇠식을 통해 쉽게 추정할 수 있다. 하지만 지표면에 전달되는 진동 추정은 기반암 상부에 위치한 토층 고유주기의 영향을 받기에 위치별 지질정보 파악이 중요하다. 지질정보 기반 진도 추정을 위해 지반조사 자료가 필요하며, Vs 주상도가 없을 경우 표준관입시험을 통해 대상지반의 강도 및 특성 파악에 주로 사용된다. 국토지반정보 포털시스템에서는 국내 지반에서 수행된 지반조사자료를 통합하여 관리하고 있으며, 표준관입시험 정보가 약 40만공을 구축되어 있다. 본 연구에서는 지반정보를 기반으로 체감형 진도정보 산출을 위해 권역별로 증폭계수 정량화 가능성을 검토하였다. 이때 SPT-N치를 자료를 통해 전단파 주상도를 생성하고, 대상지역에 지반응답해석을 수행하였다. 권역별 증폭계수와 지진파의 주기별 진도 분포는 해석방법 및 권역설정에 따라 큰 차이를 보였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 암반역학위원회 학술세미나 논문집
• /
• pp.103-114
• /
• 2002

Stability of cut-slope is considered to have a deep relationship with rock types since rock has its own engineering and geological characteristic such as shear strength, durability, weathering profile, geological structures. Therefore, analysis of geological and engineering characterisics of rock mass is essential for the evaluation of rock slope stability This paper introduces the statistical data of slope failure cases which was collected from highway slopes constructed in sedimentary rock mainly of shale in Ky ng-sang Basin. Primary failure feature in this area is planar failure along the bedding regardless of slope geometry. Even a disasterous slope failure case due to the thick clay layer between the beddings was reported. Failures and rock fall were reported to ocurred frequently after the completion of cutting due to the weathering, so long-term slope stability should be considered as a important factors in design.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 토목섬유 학술발표회 논문집
• /
• pp.21-38
• /
• 1999

Engineering properties of most polymers used in geosynthetics such as geogrid can be degraded by the chemical reaction (e.g., oxidization, ultraviolet rays, hydrolysis etc.), chemical and mechanical load, microorganism, and so on. In addition, polymer can be damaged by the compaction during construction, and the characteristic of tensile strength of polymer can be changed by the long-term creep effect. In this study, engineering properties of flexible geogrids which are manufactured by weaving/knitting the high-tenacity polymers such as polyester formed in a very open, grid-like configuration, coated with any one of a number of materials (e.g., PVC, latex, etc.), are investigated. Through the analysis of test results, the durability and the long-term design tensile strength of flexible geogrids are evaluated.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.77-84
• /
• 2003

Deep excavations in the urban areas have been frequently going on in large scale. Soil-nailing and Earth-anchor supporting methods are generally used in deep excavation. These construction methods cause ground disturbances during drilling process, and damages of adjacent structures and ground due to the differential settlement throughout construction period, and unexpected behaviors of supporting system according to the characteristics of drilling machine and ground condition. This article introduces two actual examples of adjacent deep excavation for the construction of university buildings in granitic Seoul area. The important results of construction and measurements obtained using Crawler drilling machine for Soil-nailing and Earth-anchor supporting methods are summarized. And some suggestions are given to improve and develop the technique of design and construction in the deep excavation projects having similar ground condition and supporting method.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.131-136
• /
• 2003

Landslide is a natural disaster frequently noticed In korea during monsoon season in flicting nationwise damages on human lives, properties, transportation networks, construction sites, etc. This study is about landslide characteristic in rainfall. This study selects seven sites that occured in 2001 and 2002. So elect areas divide and studied special quality by carcinoma by igneous rock, metamorphic rock, sedimentary rock. According to study finding, because igneous rock area is very thin into 1m interior and exterior soil layer, failures happened much rock and soil interface. There was place that depth of soil layer becomes about 2∼3m being area that receive serious weathering case of metamorphic rock. Therefore, at collapse much debriflow occurrence expect. Case that sedimentary rock area is broken through stratification looked. When see such results, it may become many helps to study characteristics of landslide occurrence area grasping collapse special quality by rock type.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.1117-1121
• /
• 2010

Several isotropic compression-expansion tests and a series of drained conventional traxial tests with various confining pressures for relative density of Beakma river sand 25%, 50%, 80% and 100% selecting Lade's Single Work-Hardening constitutive model. This examination materials use regression analysis as a basis, depending on the relative density of soil parameters change statement attributes. Yield fuction represent the soil parameters h and $\alpha$ is not affected by the changes in the relative density. $\eta_1$ could be replaced by fomula. And Numerical analysis results predicted very good and could confirm that.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.425-428
• /
• 2005

To resolve land demand by the development of various industries and the cityward tendency of population, the construction of ultra-soft ground that is unused in the past has been progressing with activity. The ultra-soft ground has very small shear strength and large deformation, so leads to many problems in ground improvement in construction. In order to dispose of these problems, it is necessary to develope the chemical materials that can be applied to the surface stabilization of ultra-soft ground. In this study, the new ground treatment that is using cement and SCS is compared, analyzed with existing ground treatment. In addition, through the laboratory tests that check the characteristic of congealment and strength, the application of SCS in field is affirmed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.437-442
• /
• 2005

The high pressure jet grouting method is mainly used in the grouting. But, this method has problems that the scale and strength of improved body is not constant with ground condition. Considering these problems, triple rod MJM that results in the high-strength effect by the technology of the injected ${\phi}7mm$ cement mortar was developed. In this MJM, the unconfined strength is estimated with the various combination ratio and engineering characteristic, strength improvement effect of improved body, was checked through the field test. It is known that the application of MJM was verified with ground and construction condition.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.663-666
• /
• 2008

For a fill dam, when a long time has passed since its completion, it is very hard to judge its safety and to maintain effectively it due to limitation and restriction in data showing safety status. Conventional method based on a specific point data by surface settlement gauge is commonly used to define deformation characteristic of dam. However, point data-based deformation analysis cannot provide deformation data of the entire dam. In this study a state-of-the-art terrestrial laser scanning technology is introduced to analyze the entire deformation of dam. As a result, it is known that 3D scanning technique can also be effectively used in evaluating dam safety and then establishing adequate maintain plan.