• 한국멀티미디어학회논문지
• /
• 제9권6호
• /
• pp.709-719
• /
• 2006

To protect against unlawful reproductions and distribution, the current paper proposes a digital watermarking technique for architectural drawings produced using a CAD system. First, the POLYLINEs are extracted from the drawing; then, an adaptive algorithm is used to embed a watermark in the characteristics of each POLYLINE. Next, the CIRCLEs are embedded using an adaptive watermarking algorithm related to the radius of circle from drawing. The proposed watermarking scheme is robust to various attacks, such as the geometrical transformation. Additionally, the proposed method satisfies the requirement of transparency for CAD program. It used AutoCAD 2002, which is commonly used as a CAD program for experiments. Experimental results confirmed the robustness and invisibility of the embedded watermarks in several conversions of an architectural drawing.

• 대한조선학회논문집
• /
• 제60권4호
• /
• pp.240-247
• /
• 2023

In this study, morphological and hydrodynamic characteristics of the non-axisymmetric supercavity generated behind a disk-shaped cavitator were examined. By extending the previous study on axisymmetric supercavitating flow based on a boundary element method, hydrodynamic forces acting under the angle of attack condition of 0 to 30 ° and shape characteristics of the supercavity were analyzed. The results revealed that increasing the angle of attack by 30 ° reduced the length and width of the cavity by about 15% and the volume by about 40 %. An empirical formula that can quantitatively estimate the geometrical characteristics and change of the cavity was derived. It is expected that this method can be used to evaluate the shape information and force characteristics of the supercavity for the control of the vehicle in a very short time compared to the viscous analysis in the initial design stage of the supercavity underwater vehicle.

• 복식
• /
• 제18권
• /
• pp.167-181
• /
• 1992

This study was conducted to clarify the formativeness of Cezanne's painting and it's influence on the Modern Fashion. Recently, fashion was introduced and applied the originality of paintings into the fabric and fashion designing. To go with the current of the times I already discussed about the Modern Fashion under the influence of the color of Impressionism and N대-Impressionism in the previous paper. In this study, Cezanne's painting and it's influence on the Modern fashion was investigated. As one of the original Impressionist, Paul Cez anne had been so adversely affected by the critical attack on his contributions to the 1874 and 1877 exhibitions that he never again showed with the group. That is, he was the first Impressionist to become dissatisfied with the superficial recording of atmospheric effects. When he turned to nature, it was not simply to depict the objects that occupied a given site but rather to consider relationships among those objects. Cezanne attempted to track down the fundamental laws of geometrical prototypes of sphere, prism and corn. Color too, he found, could be employed according to principle, like the tones of a musical scale. Throughout the Modern Fashion, various forms of Bustle style dress and geometrical style dress were reappered under the influence of the Cez anne's painting technique. And the order and the unity of all nature was illuminated on the fashion's pattern.

• 한국항공우주학회지
• /
• 제46권4호
• /
• pp.297-305
• /
• 2018

UCAV는 적진 중심으로의 침투, 공격 등 적대적 상황에서 임무를 수행하는 것을 목표로 한다. 일차적으로 적의 레이더에 포착되지 않아야 하므로 RF 스텔스 기술의 적용이 필수적이다. 최신 RCS 저감 기술이 적용된 대표적인 비행체로는 Blended Wing Body 형태의 X-47B UCAV이다. 본 연구에서는 X-47B와 유사한 모델 UCAV 형상을 설계한 다음, Ray Launching Geometrical Optics(RL-GO) 기법을 활용하여 모델 UCAV의 고주파수 영역에서의 RCS 특성을 분석하였다. 특히 IR 저감이 고려된 UCAV 형상이 RCS에 미치는 영향성을 조사하였다. 마지막으로 모델 UCAV의 공기 흡입구에 최적화된 RAM을 적용하였을 때의 RCS 변화를 분석하였다.

• 한국멀티미디어학회논문지
• /
• 제10권12호
• /
• pp.1601-1611
• /
• 2007

In this paper, we presented geometric CAD watermarking scheme for Architectural design drawings using line, arc, and circle components to prevent infringement of copyright from unlawfulness reproductions and distribution. The conventional CAD watermarking scheme can be applied to both line and arc components. But the proposed scheme consists of line, arc and circle watermarking schemes for three basic components of CAD design. After extracting line, arc and circle components from designed drawing, the watermark is embedded into the length of Line component, the angle of arc component, and the radius of circle component considering the robustness against various geometric transformations. The embedding strengths in each component are determined to be preserving the transparency of the watermark. By experimental result, we confirmed the robustness and the invisibility of embedded watermarks in several conversions of architectural design drawing.

• International Journal of Aeronautical and Space Sciences
• /
• 제7권1호
• /
• pp.99-105
• /
• 2006

In this study, nonlinear static and dynamic aeroelastic analyses for a high-aspect-ratio wing have been performed. To achieve these aims, the transonic small disturbance (TSD) theory for the aerodynamic analysis and the large deflection beam theory considering a geometrical nonlinearity for the structural analysis are applied, respectively. For the coupling between fluid and structure, the transformation of a displacement from the structural mesh to the aerodynamic grid is performed by a shape function which is used for the finite element and the inverse transformation of force by work equivalent load method. To validate the current method, the present analysis results of a high-aspect-ratio wing are compared with the experimental results. Static deformations in the vertical and torsional directions caused by an angle of attack and gravity loading are compared with experimental results. Also, static and dynamic aeroelastic characteristics are investigated. The comparisons of the flutter speed and frequency between a linear and nonlinear analysis are presented.

• 수산해양기술연구
• /
• 제32권3호
• /
• pp.302-309
• /
• 1996

Cavitation erosion-corrosion implies damage to materials due to the shock pressure or shock wave that results when bubbles form and collapse at a metal surface within a liquid. If the liquids corrosive to the material, a condition typically encountered in industry, the component materials may suffer serious damage by a combination of mechanical and electrochemical attack. To suppress cavitation erosion as well as cavitation erosion-corrosion to hydraulic equipments, innovations such as the improvement in the geometric design of the equipment or the selection of suitably resistant construction materials are necessary. This study was tested by using the piezoelectric vibrator with 20kHz, 24${\mu}$m for cavitation generation. And also, the vibratory cavitation erosion-corrosion tests on commercial mild steel SS41were carried out. We carefully observed the erosion pattern and surface photography. The geometrical mechanism of pit growth, which is to be likely these processing; shallow typelongrightarrowundercut typelongrightarrowwide shallow type.

• 한국멀티미디어학회논문지
• /
• 제9권12호
• /
• pp.1596-1606
• /
• 2006

There has been more increased the development of 3D technique since many 3D contents of 3D graphic model, 3D mobile/computer game, and 3D CAD have been serviced in Web or industry fields. Therefore, the watermarking system is more required to protect the copyright for 3D contents. Currently there has been researched about the watermarking for 3D graphic model of mesh or NURBS. However, watermarking technique based on CAD design drawing leaves something to be desired yet. This paper proposed the watermarking technique for 3D CAD design drawing using Line and Arc components. After drawing out Line and Arc components from designed drawing, we embed the watermark into both the length of Line component and the radius of Arc component. Experimental results verified that the proposed algorithm satisfies the transparency about watermarked drawing and also has the robustness against several attacks by using public CAD tool.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3491-3496
• /
• 2007

If a molten core is released from a reactor vessel into a reactor cavity during a severe accident, an important safety issue of coolability of the molten core from top-flooding and concrete ablation due to a molten core concrete interaction (MCCI) is still unresolved. The released molten core debris would attack the concrete wall and basemat of the reactor cavity, which will lead to inevitable concrete decompositions and possible radiological releases. In a OECD/MCCI project scheduled for 4 years from 2002. 1 to 2005. 12, a series of tests were performed to secure the data for cooling the molten core spread out at the reactor cavity and for the 2-D long-term core concrete interaction (CCI). The tests included not only separate effect tests such as a melt eruption, water ingression, and crust failure tests with a prototypic material but also 2-D CCI tests with a prototypic material under dry and flooded cavity conditions. The paper deals with the transient simulations on the CCI-2 test by using a severe accident analysis code, CORQUENCH, which was developed at Argonne National Laboratory (ANL). Similar simulations had been already per for me d by using MELCOR 1.8.5 code. Unlike the MELCOR 1.8.5, the CORQUENCH includes a melt eruption mode I and a newly developed water ingression model based on the water ingression tests under the OECD/MCCI project. In order to adjust the geometrical differences between the CCI-2 test (rectangular geometry) and the simulations (cylindrical geometry), the same scaling methodology as used in the MELCOR simulation was applied. For the direct comparison of the simulation results, the same inputs for the MELCOR simulation were used. The simulation results were compared with the previous results by using MELCOR 1.8.5.

• 한국멀티미디어학회논문지
• /
• 제14권6호
• /
• pp.742-751
• /
• 2011

본 논문에서는 형상 특징자인 열 커널 인증 (Heat Kernel Signature, HKS)를 기반으로 강인한 3D 모델 해싱을 제안한다. 키와 매개변수에 의존한 형상 특징자 기반 3D 모델 해싱을 제안한다. 제안한 방법에서는 Mesh Laplace 연산자의 고유치와 고유벡터에 의하여 각 꼭지점에 대한 전역 및 국부 타임 HKS 계수를 구한 다음, 이 계수들을 정방형 2D 셀로 군집화한다. 그리고 각 셀에 할당된 HKS 계수 쌍의 거리 가중치 기반으로 정의된 특징계수와 랜덤 계수 키와의 조합에 의하여 중간 해쉬 계수를 생성한 다음, 이진화 과정에 의하여 최종 이진 해쉬를 생성한다. 본 실험에서는 3D 범용 툴을 이용한 다양한 기하하적 공격과 위상학적 공격을 통하여 강인성을 평가하였고, 모델과 키 조합에 대한 해쉬의 유일성을 평가하였다. 또한 인증 범위를 만족히는 공격 세기를 측정함으로써 모델 공간성을 평가하였다. 실험결과로부터 제안한 3D 모델 해싱이 기존 해싱에 비하여 강인성 모델 공간성 및 유일성이 우수함을 확인하였다.