• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.4
• /
• pp.189-197
• /
• 2007

GIS is the tool widely used for the practical solution of spatial problems in every region regardless of the language and ideology. In this paper research trends and tendencies of GIS in North Korea are reviewed compared with those in South Korea. For this purpose, academic publications on GIS in North Korea are surveyed and classified according to main subjects in GIS. Such classification by main subjects of GIS in North Korea are conducted on the basis of the classification of research trends and tendencies of GIS in South Korea. As a result, researches in North Korea are mainly focused upon such fields as geodetic surveying and measurement, map manufacture, atmospheric phenomena, agriculture and disasters, while there are few studies related to such fields as national GIS policy and circulation, GIS education, internet-based GIS, and traffic, to name but a few. Most parts of applied data are based on low and medium resolution image such as meteorological satellite images, Landsat images, and so on. This reflects the low level of the development of GIS DB infrastructure in North Korea.

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.1 s.9
• /
• pp.57-70
• /
• 1997

Conventional procedures to determine vertical deflections and astronomical coordinates require the stellar observations which be under restraints of clear night-time weather conditions, surrounding environment, long observation time and the use of instruments, etc. Therefore the more effective observation method subjugatting these problems has requested. The objective of this study is to propose method to compute vertical deflections, astronomical coordinates(latitude and longitude), and astronomical azimuth by mixing GPS observation results and orthometric heights. For this study, programmed the program which able to obtain the change in geoid undulation by using the GPS- determined geodetic height difference and the orthometric height difference, and GPS satellite surveying was performed at both ten points of astronomical points and four triangulation points around each astronomical station in South Korea. The Astronomical results determined from GPS observations compared to those determined from both conventional astronomical measurements and the recent earth gravitational Model(EGM96).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.12
• /
• pp.1942-1948
• /
• 2021

The cadastre in Korea was established with the outdated technology of the Japanese colonial period, and thus currently 15% of the Korea domestic land does not match the cadastral map. Accordingly, the government has been establishing the Korean cadastre under the name of 'Cadastral Re-investigation Project' and is changing the origin of the survey to the world geodetic system. Assuming that the project is completed, we propose a drone boundary survey method that can be used to easily survey using the exact digital cadastral information. The developed mobile GCS application can control the drone and acquire the boundary point coordinates recorded in the cadastre, and the drone automatically flies to mark the boundary points. The developed prototype of drone made a tour along the 6 boundary points in 2 minutes.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.1
• /
• pp.65-72
• /
• 2010

In this study, the performances of a medium grade IMU which is aimed for Mobile Mapping System and a low grade IMU for pedestrian navigation are analyzed through simulations under GPS signal blockage. In addition, an analysis on the accuracy improvement of barometer, electronic compass, or multi-sensor(combination of barometer and electronic compass) to correct medium grade or low grade IMU errors in the situation of GPS signal blockage is performed. With the medium grade IMU, the three dimensional positioning error from INS exceeds the demanded accuracy of 5m when the block time is over 30 seconds. When we correct IMU with barometer, compass, or multi-sensor, however, the demanded accuracy is maintained up to 60 seconds. In addition, barometer is more effective than the electronic compass when they are combined. In case of low grade IMU like MEMS IMU, the three dimensional positioning error from INS exceeds the demanded accuracy of 20m when the block time is over 15 seconds. When we correct INS with barometer, compass, or multi-sensor, however, the demanded accuracy is maintained up to 15 seconds in simulation results. On the contrary to medium grade IMU, electronic compass is more effective than the barometer in case of low velocity such as pedestrian navigation. It is expected that the analysis suggested a method to decrease position or attitude error using aided sensor integration when MMS or pedestrian navigation is operated under 1he environment of GPS signal blockage.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.1
• /
• pp.31-43
• /
• 2015

This study had been aimed to conduct the camera calibration on VLBI antenna in the Space Geodetic Observation Center of Sejong City with a low-cost digital camera, which embedded in a mobile phone to determine the three-dimension position coordinates of the VLBI antenna, based on stereo images. The initial values for the camera calibration have been obtained by utilizing the Direct Linear Transformation algorithm and the commercial digital photogrammetry system, PhotoModeler $Scanner^{(R)}$ ver. 6.0, respectively. The accuracy of camera calibration results was compared with that the camera calibration results, acquired by a bundle adjustment with nonlinear collinearity condition equation. Although two methods showed significant differences in the initial value, the final calibration demonstrated the consistent results whichever methods had been performed for obtaining the initial value. Furthermore, those three-dimensional coordinates of feature points of the VLBI antenna were respectively calculated using the camera calibration by the two methods to be compared with the reference coordinates obtained from a total station. In fact, both methods have resulted out a same standard deviation of $X=0.004{\pm}0.010m$, $Y=0.001{\pm}0.015m$, $Z=0.009{\pm}0.017m$, that of showing a high degree of accuracy in centimeters. From the result, we can conclude that a mobile phone camera opens up the way for a variety of image processing studies, such as 3D reconstruction from images captured.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.1
• /
• pp.29-36
• /
• 2004

This study describes the development of coordinate transformation tool for transforming the digital map using newly derived transformation parameters which are determined from the data referred to the local geodetic datum and the geocentric datum (ITRF2000) and the distortion modelling derived from collocation method. We prepared 190 common points and used 107 points to calculate 7 transformation parameters. In order to evaluate an accuracy of coordinate transformation, 83 common points were tested. In this study, we used Molodensky-Badekas model to derive the 7 transformation Parameters. An accuracy of 0.22m was obtained applying 7 Parameters transformation and the distortion modelling together. It shows that the accuracy of coordinate transformation is improved 72% against the result of 7 parameters transformation only. We developed the transformation tool, GDKtrans, which can be transformed the digital map of scales 1/50,000, 1/25,000 and 1/5,000. We also analyzed the digital map of l/5,000 at six urban areas by GPS observations. The result shows less RMSE of about 1.9 m and large disagreement at position and features. Consequently, we suggests that l/5,000 digital map is necessary of whole revision.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.5
• /
• pp.513-518
• /
• 2008

The research of global-scale mass redistribution and it changed by Earth gravity filed variation observations, including Earth's oblateness $J_2$(also called low degree spherical harmonic coefficient $C_{20}$), is in continuous progress. Recently, the comparative analysis of geodetic observation SLR can be made by the development of GRACE and other time-variable gravity measurements. In this study, $C_{20}$ time series changes in the value of comparative analysis was got by GRACE monthly Gravity filed model (CSR RL04) for the period April 2002 to May 2008. And comparative analysis the harmonic coefficients of $C_{20}$ was obtained from SLR observations. Signal analysis for two time-series data was made by wavelet transform, CWT(continuous wavelet transform), XWT(cross wavelet transform) and WTC(wavelet coherence) methods. The results indicate that GRACE and SLR values for $C_{20}$ had both decreasing trend, as well as SLR data represent the annual frequencies, and GRACE was semiannual variations. In addition, the results of GRACE and SLR had a strong correlation with the XWT and WTC in an annual cycle.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.1
• /
• pp.21-30
• /
• 2012

When two bands have different look angle in a space-borne camera system, the registration between two bands is required. The registration cannot be modeled with constant parameters because of dynamic of platform and parallax effect. The parallax effect is caused by terrain relief, hence it causes local distortion between two bands. Therefore, the terrain relief correction in order to reduce the parallax effect is required for better registration result, especially for high resolution image data. Such terrain relief correction also can be applied to image data acquired from multiple detectors with different look angle within a band, which is a one of commonly used configuration for a wider swath in space-borne camera system, in order to reduce the distortion between detectors. The RFM is a popular abstract model in remote sensing field, which gives us the relationship between the image plane and geodetic coordinate system. Therefore, we propose a terrain relief correction method based on the RFM. The experiment showed very promising result.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.3
• /
• pp.183-192
• /
• 2013

As a worldwide trend, the spatial information that is established by country, institution and purpose is integrated into the data with a single spatial reference to improve the data connectivity and usability. In this study, a new national single origin plane rectangular coordinate system was studied to efficiently respond to the changes in the spatial reference according to the introduction of a new national geodetic standard and to the demand of seamless data service in the spatial information sector. For this purpose, the Korean Peninsula was set as the projection region and the projection distortion in the projection region was analyzed. The projection parameters were defined to homogenize and minimize the projection distortion, and their standardization and registration on the international organizations were conducted. The study on the required optimal projection equation resulted in the Hooijberg projection equation and projection parameters (${\Phi}$, ${\lambda}$, K, N, E) resulted in $38^{\circ}N$ and $128^{\circ}E$ projection origin, and a scale factor of 0.99924. The proper false northing and easting were 700,000m N and 400,000m E, respectively, considering the introduction of country station index system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.4
• /
• pp.313-321
• /
• 2004

Korean government has offcially decided to adopt global geodetic reference system(ITRF and GRS80) from 2007 keeping pace with the spread of GNSS. Industries related with LBS and telematics have called for use of the new coordinate system suitable for GIS/GPS applications. The government also defined the single plane coordinate system that covers entire korean peninsula as UTM-K considering DB-based framework data and user-friendliness, and its defects were corrected while being applied to the building of road framework data. The TM projection, and origin scale factor of plane coordinate system, 0.9996were employed in order to satisfy the single plane coordinate system for the entire Korean peninsula. For the origin of plane coordinate system, longitude of $127^{\circ}$30'00" and latitude of $38^{\circ}$00'00" were applied and, for the initial value of plane coordinate system, N=2,000.000m and E=1,000,000m were used. In addition to considerable savings in costs, it is expected that the UTM-K is applicable for correcting errors occurred during acquisition of geographic information and for aggregating map data produced by different sources. However, during the initial stage for introduction, confusion is forecasted due to the use of two different coordinate systems, which may be minimized by continued publicity and education.