• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.10
• /
• pp.2708-2730
• /
• 2012

The growing concern for the protection of personal information has made it critical to implement effective technologies for privacy and data management. By observing the limitations of existing approaches, we found that there is an urgent need for a flexible, privacy-aware system that is able to meet the privacy preservation needs at both the role levels and the personal levels. We proposed a conceptual system that considered these two requirements: a graph-based, access control model to safeguard patient privacy. We present a case study of the healthcare field in this paper. While our model was tested in the field of healthcare, it is generic and can be adapted to use in other fields. The proof-of-concept demos were also provided with the aim of valuating the efficacy of our system. In the end, based on the hospital scenarios, we present the experimental results to demonstrate the performance of our system, and we also compared those results to existing privacy-aware systems. As a result, we ensured a high quality of medical care service by preserving patient privacy.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.477-480
• /
• 1996

The main objective of this research is to develop the optimal control method for a Distribution Center - multi Branch inventory distribution system. With the continuous review policy, the distribution center places an order for specific order quantity to an outside supplier, and the order quantity is replenished after a certain lead time. Also, each branch places an order for particular order quantity to the distribution center to satisfy the customer demands, and receives the replenishment after a lead time. When an out of stock condition occurs during an order cycle, a backorder is placed to the upper level to fill the unfilled demands. With these situation, variable demand and variable lead time are used for better industrial practice. Futher, actual lead times with a generic lead time distribution are used in developing the control model. Under the actual lead time model, the customer service measures actually attained for the distribution center and each branch are explained as the effective customer service measures. Thus, throughout the optimal control (using computer search procedures), we can set the desired service levels for the distribution center and each branch to produce the effective service level for each branch which is consistent with the goal level of service for each branch. At the same time, the entire distribution system keeps minimum inventories.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.42
• /
• pp.31-38
• /
• 1997

The main objective of this research is to develop a model to select the optimal input service level for a distribution center - multi branch inventory distribution system. With the continuous review policy, the distribution center places an order for specific order quantity to an outside supplier, and the order quantity is replenished after a certain lead time. Also, each branch places an order for particular order quantity to the distribution center to satisfy the customer demands, and receives the replenishment after a lead time. When an out of stock condition occurs during an order cycle, a backorder is placed to the upper level to fill the unfilled demands. With these situation, variable demand and variable lead time are used for better industrial practice. Further, actual lead times with a generic lead time distribution are used in developing the control model. Under the actual lead time model, the customer service measures actually attained for the distribution center and each branch are explained as the effective customer service measures. Thus, throughout the optimal control (using computer search procedures), we can select the optimal input service levels for the distribution center and each branch to attain the effective service level for each branch which is consistent with the goal level of service for each branch. At the same time, the entire distribution system keeps minimum inventories.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.3
• /
• pp.55-64
• /
• 2001

The main objective of this research is to develop a model to select the optimal input service level for a distribution center-multi branch inventory distribution system. With the continuous review policy, the distribution center places an order for specific order quantity to an outside supplier, and the order quantity is replenished after a certain lead time Also, each branch places an order for particular order quantity to the distribution center to satisfy the customer demands, and receives the replenishment after a lead time. When an out of stock condition occurs during an order cycle, a backorder is placed to the upper level to fill the unfilled demands. With these situation, variable demand and variable lead time are used for better industrial practice. Further, actual lead times with a generic lead time distribution are used in developing the control model. Under the actual lead time model, the customer service measures actually attained for the distribution center and each branch are explained as the effective customer service measures. Thus, throughout the optimal control (using computer search procedures), we can select the optimal input service levels for the distribution center and each branch to attain the effective service levels for each branch which is consistent with the goal level of service for each branch. At the same time, the entire distribution system keeps minimum inventories.

• Transactions on Control, Automation and Systems Engineering
• /
• v.3 no.1
• /
• pp.43-50
• /
• 2001

In this paper, we propose the design procedure of advance Polynomial Neural Networks(PNN) architecture for optimal model identification of complex and nonlinear system. The proposed PNN architecture is presented as the generic and advanced type. The essence of the design procedure dwells on the Group Method of Data Handling(GMDH). PNN is a flexible neural architecture whose structure is developed through learning. In particular, the number of layers of the PNN is not fixed in advance but is generated in a dynamic way. In this sense, PNN is a self-organizing network. With the aid of three representative numerical examples, compari-sons show that the proposed advanced PNN algorithm can produce the model with higher accuracy than previous other works. And performance index related to approximation and generalization capabilities of model is evaluated and also discussed.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.5
• /
• pp.117-125
• /
• 2003

Since the recorded information used for operation of a catchment modelling system contain errors that influence the calibration of catchment modelling system control parameter values, the accurate estimation of these parameters is difficult. Despite these influences, existing traditional calibration approaches focus only on achieving the best "curve fitting" between simulated and recorded data, and not on generic evaluation of control parameter values. This paper introduces an Early Stopping Technique which is aimed at avoiding the procedure of curve-fitting through monitoring improvements in the objective function used for assessing the optimal parameter set. Application of this approach to the calibration of SWMM (Storm Water Management Model) on the Centennial Park catchment in Sydney, Australia is outlined. outlined.

• International Journal of Computer Science & Network Security
• /
• v.21 no.9
• /
• pp.247-260
• /
• 2021

Data modeling is a process of developing a model to design and develop a data system that supports an organization's various business processes. A conceptual data model represents a technology-independent specification of structure of data to be stored within a database. The model aims to provide richer expressiveness and incorporate a set of semantics to (a) support the design, control, and integrity parts of the data stored in data management structures and (b) coordinate the viewing of connections and ideas on a database. The described structure of the data is often represented in an entity–relationship (ER) model, which was one of the first data-modeling techniques and is likely to continue to be a popular way of characterizing entity classes, attributes, and relationships. This paper attempts to examine the basic ER modeling notions in order to analyze the concepts to which they refer as well as ways to represent them. In such a mission, we apply a new modeling methodology (thinging machine; TM) to ER in terms of its fundamental building constructs, representation entities, relationships, and attributes. The goal of this venture is to further the understanding of data models and enrich their semantics. Three specific contributions to modeling in this context are incorporated: (a) using the TM model's five generic actions to inject processing in the ER structure; (b) relating the single ontological element of TM modeling (i.e., a thing/machine or thimac) to ER entities and relationships; and (c) proposing a high-level integrated, extended ER model that includes structural and time-oriented notions (e.g., events or behavior).

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.843-855
• /
• 2020

X-plane submarines show better maneuverability as they have much longer span of control plane than that of cross plane submarines. In this study, captive model tests were conducted to evaluate the maneuverability of an X-plane submarine using Computational Fluid Dynamics (CFD) and a mathematical maneuvering model. For CFD analysis, SNUFOAM, CFD software specialized in naval hydrodynamics based on the open-source toolkit, OpenFOAM, was applied. A generic submarine Joubert BB2 was selected as a test model, which was modified by Maritime Research Institute Netherlands (MARIN). Captive model tests including propeller open water, resistance, self-propulsion, static drift, horizontal planar motion mechanism and vertical planar motion mechanism tests were carried out to obtain maneuvering coefficients of the submarine. Maneuvering simulations for turning circle tests were performed using the maneuvering coefficients obtained from the captive model tests. The simulated trajectory showed good agreement with that of free running model tests. From the results, it was proved that CFD simulations can be applicable to obtain reliable maneuvering coefficients for X-plane submarines.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1999.06a
• /
• pp.133-140
• /
• 1999

In this paper, we propose a method of image-based three-dimensional modeling for realistic facial expression. In the proposed method, real human facial images are used to deform a generic three-dimensional mesh model and the deformed model is animated to generate facial expression animation. First, we take several pictures of the same person from several view angles. Then we project a three-dimensional face model onto the plane of each facial image and match the projected model with each image. The results are combined to generate a deformed three-dimensional model. We use the feature-based image metamorphosis to match the projected models with images. We then create a synthetic image from the two-dimensional images of a specific person's face. This synthetic image is texture-mapped to the cylindrical projection of the three-dimensional model. We also propose a muscle-based animation technique to generate realistic facial expression animations. This method facilitates the control of the animation. lastly, we show the animation results of the six represenative facial expressions.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.311-315
• /
• 2002

Six sigma management has obtained good results in manufacturing and service industry as a new innovation approach to improve the enterprise-wise quality processes. However, there are lacks of implementation cases in the construction industry and furthermore, a results from a few cases applied is not successful enough to draw an attraction against the six sigma method. The main goal of this paper is to provide a comparative study regarding the pre-requisite conditions for the application of six sigma to the construction industry. Then, it present a generic procedure model that can support the introduction of six sigma management. Finally, the model is verified through the case study and lessons learned form a case are presented.