• 한국연소학회:학술대회논문집
• /
• 2002.06a
• /
• pp.41-45
• /
• 2002

The zone-conditioned CMC equations are derived by taking an unconditional average of the generic conservation equations multiplied by delta and Heaviside functions in terms of mixture fraction and reaction progress variable. The resulting equations are essentially in the same form as the single zone CMC equations except for separate flow fields for burned and unburned gas. The zone-conditioned two-fluid equations are applied to a stagnating turbulent premixed flame brush of Cheng and Shepherd[5l. It is shown that the flame stretch factor is of crucial importance to accurately reproduce the measured mean reaction progress variable and conditional velocities. Further work is in progress for the relationship between surface and volume averages and extension to partially premixed combustion on the basis of a triple flame structure, e. g. in a lifted turbulent diffusion flame.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.795-801
• /
• 1998

Metallic fatigue of Pressurized Water Reactor(PWR) materials is a generic safety issue for commercial nuclear power plants. It is very important to obtain the fatigue usage factor for component integrity and life extension. In this paper, fatigue usage was obtained at the inside surface of Kori unit 2, 3 and 4 RCP casing weld, based on the design transient. And it was intended to establish the procedure and the detailed method of fatigue evaluation in accordance with ASME Section III Code. According to this code rule, two methods to determine the stress cycle and the number of cycles could be applied. One method is the superposition of cycles of various design transients and the other is based on the assumption that a stress cycle correspond to only one design transient. Both method showed almost same fatigue usage in the RCP casing weld.

• Animal Systematics, Evolution and Diversity
• /
• v.29 no.3
• /
• pp.259-266
• /
• 2013

A newly recorded aorid species, Paragrandidierella minima Ariyama, 2002, from Korean waters is reported with a description and illustrations, and its generic features are considered. This species is characterized by the carpochelate gnathopod 1 in matured male, the posterodistal protrusion on peduncle 5 of antenna 2, the absence of the apical spine on inner plate of maxilliped, the minute apical projection on inner lobe of lower lip, the acute posteroproximal extension on the basis of each pereopod 5 and 6, the shape of uropods and telson, and the large inter-ramal process of uropod 1. This is the first report of the genus Paragrandidierella from Korea.

• Annual Conference of KIPS
• /
• 2000.10a
• /
• pp.203-206
• /
• 2000

GJ는 인자적 다형성(Parametric Polymorphism)을 사용할 수 있도록 Java를 확장한 언어이다. 인자적 다형성은 포괄적 프로그래밍을 가능하게 할 뿐만 아니라 객체지향성의 이론적 결함을 메워줄 수 있는 언어 기능이다. 그러나 일반성이 놓아지면 상대적으로 효율성은 감소하기 때문에 반대로 일반성을 제약하여 효율성을 높여야만 할 때가 많다. C++에서는 특정한 타입에 대해서는 특화된 코드가 사용될 수 있도록 하여 효율성의 손실을 메울 수 있는 기능을 제공하고 있다. 본 논문에서는 포괄적 프로그래밍으로 일반성과 재사용성을 높이고 타입 인수의 특수화를 통해 일반성에서 오는 효율성 손실을 막기 위한 방법으로, GJ의 의미론을 확장하고 그 실용적인 타당함을 보이기 위한 몇 가지 예제를 기술하였다. 그리고 이러한 기능적 확장에 따르는 이점과 단점을 열거하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06c
• /
• pp.166-168
• /
• 2006

Stalemate는 정형이론 및 Statechart를 기반으로 하는 설계도구로서 시스템의 기능적, 구조적 분해를 통해 계층적으로 모듈화된 설계 단위를 작성할 수 있도록 한다. 또한 동일한 기능을 수행하는 설계모듈을 반복적으로 재사용하기 위한 일반화 차트 메커니즘을 지원하는데 본 논문에서는 Statemate가 지원하는 Ada 언어의 재사용 컴포넌트 개념을 적용하여 일반화 차트가 처리할 수 있는 형식매개변수의 자료형 제약을 완화시킨 확장된 개념의 재사용 설계모듈을 제시한다.

• ETRI Journal
• /
• v.41 no.1
• /
• pp.73-83
• /
• 2019

This paper describes in detail the processing path leading to successful phase images stitching in digital holographic microscope for the extension of the field of view. It applies FIJI Grid/Collection Stitching Plugin, which is a general tool for images stitching, non-specific for phase images. The FIJI plugin is extensively supported by aberration and phase offset correction. Comparative analysis of different aberration correction methods and data processing strategies is presented, together with the critical analysis of their applicability. The proposed processing path provides good background for statistical phase analysis of cell cultures and digital phase pathology.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.5
• /
• pp.129-136
• /
• 2011

This paper presents the coding method that have multi-mode and efficiency of audio codecs using the feature of audio signal. Recently, the developed extension super-wideband codec based on G.718 wideband divides two mode between Generic and Sinusiodal. So codec efficently encode audio signal exist in super-wideband. But the codec is not as efficent coding for harmonic component of wind instrument and string instrument and individual-Line component of percussion instrument. The proposed method are modeling and encoding multiple pitch and individual-line feature using multi mode coding. For the performance evaluation, we used SNR in MDCT domain for objective test and MUSHRA test for subjective test. As a result, the performance of SNR and MUSHRA test of the proposed method have better performance than the G.718 super-wideband codec.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.1
• /
• pp.74-85
• /
• 2007

During the lifecycle of a nuclear power plant many organizations are involved in KOREA. Korea Plant Engineering Co. (KOPEC) participates in the design stage, Korea Hydraulic and Nuclear Power (KHNP) operates and manages all nuclear power plants in KOREA, Dusan Heavy Industries manufactures the main equipment, and a construction company constructs the plant. Even though each organization has a digital data management system inside and obtains a certain level of automation, data sharing among organizations is poor. KHNP gets drawing and technical specifications from KOPEC in the form of paper. It results in manual re-work of definition and there are potential errors in the process. A data warehouse based on a neutral model has been constructed in order to make an information bridge between design and O&M phases. GPM(generic product model), a data model from Hitachi, Japan is addressed and extended in this study. GPM has a similar architecture with ISO 15926 "life cycle data for process plant". The extension is oriented to nuclear power plants. This paper introduces some of implementation results: 1) 2D piping and instrument diagram (P&ID) and 3D CAD model exchanges and their visualization; 2) Interface between GPM-based data warehouse and KHNP ERP system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.5
• /
• pp.913-920
• /
• 2011

Distribution systems for operating the various systems should be operated organically. Distribution systems for organic operations extend the functionality of the system and system integration for the extension is doing. However, in systems integration for each unique non-standard definition of linkage and exchange systems are used. Non-standard definition of a unique linkage and exchange systems in the maintenance and expansion will result in many negative results. To solve these problems, the system and the exchange of information about the links between systems should define standards. IEC (International Electrotechnical Commission) power to solve these problems in the field of the Common Information Model (Common Information Model, CIM) standard (IEC61970, IEC61968) is defined as the transmission and distribution system integration and standardization for the exchange of information. In this paper, standardized system for building CIM-based distribution automation system should describe the process of building. In addition, the process of establishing a common information model needed (CIM) defined and associated services for a defined set of models is proposed in the standardization process.

• Interaction and multiscale mechanics
• /
• v.1 no.1
• /
• pp.143-156
• /
• 2008

Elliptical tubes may buckle in an elastic local buckling failure mode under uniform compression. Previous analyses of the local buckling of these members have assumed that the cross-section is hollow, but it is well-known that the local buckling capacity of thin-walled closed sections may be increased by filling them with a rigid medium such as concrete. In many applications, the medium many not necessarily be rigid, and the infill can be considered to be an elastic material which interacts with the buckling of the elliptical tube that surrounds it. This paper uses an energy-based technique to model the buckling of a thin-walled elliptical tube containing an elastic infill, which elucidates the physics of the buckling phenomenon from an engineering mechanics basis, in deference to a less generic finite element approach to the buckling problem. It makes use of the observation that the local buckling in an elliptical tube is localised with respect to the contour of the ellipse in its cross-section, with the localisation being at the region of lowest curvature. The formulation in the paper is algebraic and it leads to solutions that can be determined by implementing simple numerical solution techniques. A further extension of this formulation to a stiffness approach with multiple degrees of buckling freedom is described, and it is shown that using the simple one degree of freedom representation is sufficiently accurate for determining the elastic local buckling coefficient.