• Restorative Dentistry and Endodontics
• /
• v.32 no.2
• /
• pp.95-101
• /
• 2007

This study was performed to verify the possibility of MTA and calcium sulfate as a pulp capping agent through comparing the dental pulp response in dogs after capping with MTA, calcium sulfate, and calcium hydroxide. 24 teeth of 2 dogs, 8 month old, were used in this study. Under general anesthesia, cervical cavities were prepared and pulp was exposed with sterilized #2 round bur in a high speed handpiece. MTA calcium hydroxide, and calcium sulfate were applied on the exposed pulp. Then the coronal openin,fs were sealed with IRM and light-cured composite. Two months after treatment, the animals were sacrificed. The extracted teeth were fixed in 10% neutral-buffered formalin solution and were decalcified in formic acid-sodium citrate. They were prepared for histological examination in the usual manner. The sections were stained with haematoxylin and eosin. In MTA group, a hard tissue bridges formation and newly formed odontoblasts layer was observed. There was no sign of pulp inflammatory reaction in pulp tissue. In calcium hydroxide group, there was no odontoblast layer below the dentin bridge. In pulpal tissue, chronic inflammatory reaction with variable intensity and extension occurred in all samples. In calcium sulfate group, newly formed odontoblast layer was observed below the bridge. Mild chronic inflammation with a few neutrophil infiltrations was observed on pulp tissue. These results suggest that MTA is more biocompatible on pulp tissue than calcium hydroxide or calcium sulfate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.5159-5168
• /
• 2014

The study examined the relationship among metal health, metabolic syndrome and nutrient acceptance according to gender. Implemented until 2010-2012, the 5th Korean National Health and Nutrition Examination Survey, as an original document, was used for the study. The target was problem drinkers with more than 12 points under AUDIT. Regarding mental health, it was classified into stress, depression and suicidal impulse. Metabolic syndrome was defined when three causes of BMI, waist circumference, FBS, HDL and BP were out of the normal range. The nutrient intake was obtained to confirm the energy intake of nine non-nutrients (Nutrient adequacy ratio: NAR) and the proper intake of the average non-nutrient (Mean adequacy ratio: MAR). These variables were analyzed by frequency, cross analysis and multiple regression analysis through SPSS18.0. In the general features, there was a significant difference according to age, occupation and marital status. In mental health, stress, depression and suicidal impulse were examined. Metabolic syndrome was dependant on FBS, HDL and BP. The nutrient acceptance depended on calcium, vitamin A, thiamine, riboflavin, niacin, vitamin C, and MAR. Logistic regression analysis performed on the variables showed significant differences. Stress, depression, and thoughts of suicide was significantly higher in men aged 19-29 years, and women aged 30-49 years. In the case of the male, those who employed have metabolic syndrome more than those who unemployed. In terms of female, those who were belonged into the middle - low economic level have undergone with metabolic syndrome. In the part of a Mean adequacy ratio(MAR), the male who unmarried, employed, were in the middle low economic levelwere higher. In the case of the female, it was higher for those who were in the middle - low economic level. Overall, an effective way of planning the solution regarding mental health, metabolic syndrome and nutrient intake can be found by considering these features.

• Journal of Biosystems Engineering
• /
• v.4 no.1
• /
• pp.1-23
• /
• 1979

The use of barley seeder attached to rotary tiller in the rural area has a significant meaning not only for the solution of labor peak season, but also for the increase of land utilization efficiency. The facts that presently being used barley seeders are all based on the mechanical principles of the reverse rotation, center drive and are all using forward rotating tine, which is used to be easily and heavily worn out when it rotates reversely, raise problem of recommending them to rural area in Korea. Therefore, the main objective of the study was to develop new type of rotary tine attachable to barley seeders. To attain the objective the following approaches were applied. (1) The kinematic analysis of reverse rotating barley seeders. (2) The studies on the soil bin and artificial soil. (3) The comparative experiment on the power requirement of prototype tine. The results obtained from the studies are summarized as follow: 1. The kinematic analysis of barley seeder attached to rotary tiller: The following results were obtained from the kinematic analysis for deriving general formulae of the motion and velocity characterizing the rotary tine of barley seeders presently being used by farmers. a) The position vector (P) of edge point (P) in the rotary tine of reverse rotating, center drive was obtained by the following formula. $$P=(vt+Rcos wt)i+Rsin wt j+ \{ Rcos \theta r sin \alpha cos (wt- \beta +\theta r) +Rsin \theta r sin \alpha sin (wt-\beta + \theta r) \} lk $$ b) The velocity of edge point $(P^')$ of reverse rotating, center drive rotary tine was obtained by the following formula. $$(P^')=(V-wR sin wt)i+(w\cdot Rcoswt)j + \{ -w\cdot Rcos \theta r\cdot sin \alpha \cdot sin (wt-\beta +\theta r) + w\cdot Rsin \theta r\cdot sin \alpha \cdot cos (wt- \beta + \theta r \} k $$ c) In order to reduce the power requirement of rotary tine, the angle between holder and edge point was desired to be reduced. d) In order to reduce the power requirement, the edge point of rotary tine should be moved from the angle at the begining of cutting to center line of machine, and the additional cutting width should be also reduced. 2. The studies on the soil bin and artificial soil: In order to measure the power requirement of various cutting tines under the same physical condition of soil, the indoor experiments Viere conducted by filling soil bin with artificially made soil similar to the common paddy soil and the results were as follows: a) When the rolling frequencies$(x)$ of the artificial soil were increased, the densIty$(Y)$ was also increased as follows: $$y=1.073200 +0.070780x - 0.002263x^2 (g/cm^3)$$ b) The absolute hardness $(Y)$ of soil had following relationship with the rolling frequencies$(x)$ and were increased as the rolling frequencies were increased. $$Y=37.74 - \frac {0.64 + 0.17x-0. 0054x^2} {(3.36-0.17x + 0.0054x^2)^3} (kg/cm^3)$$ c) The density of soil had significant effect on the cohesion and angle of internal friction of soil. For instance, the soil with density of 1.6 to 1.75 had equivalent density of sandy loam soil with 29.5% of natural soil moisture content. d) The coefficient of kinetiic friction of iron plate on artificial soil was 0.31 to 0.41 and was comparable with that of the natural soil. e) When the pulling speed of soil bin was the 2nd forward speed of power tiller, the rpm of driving shaft of rotary was similar to that of power tiller, soil bin apparatus is indicating the good indoor tester. 3. The comparative experiment on the power requirement of prototype tine of reverse rotating rotary: According to the preliminary test of rotary tine developed with various degrees of angle between holder and edge pcint due to the kinematic analysis, comparative test between prototype rotary tine with $30 ^\circ $ and $10 ^\circ$ of it and presently being used rotary tine was carried out 2nd the results were as follows: a) The total cutting torque was low when the angle between holder and edge point was reduced. b) $\theta r$ (angle between holder and edge point) of rotary tine seemed to be one: of the factors maximizing the increase of torque. c) As the angle between holder and edge point ($\theta r$) of rotary tine was $30 ^\circ $ rather than $45 ^\circ $, the angle of rotation during cutting soil was reduced and the total cutting torque was accordingly reduced about 10%, and the reduction efficiency of total cutting torque was low when the angle between holder and edge point ($\theta r$) of rotary tine was $10 ^\circ $, which indicates that the proper angle between holder and edge point of rotary tine should be larger than $10 ^\circ $ and smaller than $30 ^\circ $ . From above results, it could be concluded that the use of the prototype rotary tine which reduced the angle between holder and edge point to $30 ^\circ $, insted of $45 ^\circ $, is disirable not only decreasing the power requirements, but also increasing the durabie hour of it. Also forward researches are needed, WIlich determine the optimum tilted angle of rotary brocket, and rearrangement of the rotary tine on the rotary boss.

• Korean Journal of Food Science and Technology
• /
• v.9 no.3
• /
• pp.211-219
• /
• 1977

Dehulled and defatted Korean cottonseed flour was extracted with alkaline solution for 30 minutes and had precipitated the crude portein by adjusting pH $1{\sim}12$. The general composition and the amino acid composition of cottonseed protein were analyzed. Crude protein was purified with sephadex G-100 and G-200, and its component had been identified by disc electrophoresis. Toxic gossypol was removed by n-hexane, acetone and other solvents. The results were as follows. (1) pH 5, pH 7 and pH 4 were the best condition of precipitation of curde protein at single, two step and water extraction, respectively. (2) The cottonseed flour which was dehulled and defatted, contained 61.3% of crude protein. (3) The protein which was isolated from cottonseed flour, contained 20% of glutamic acid, and comparatively high levels of essential amino acids. (4) Dehulled cottonseed flour contained 0.97% of total gossypol and could be romoved 70% of total gossypol by extraction with n-hexane. (5) 10-13 bands of water soluble protein were found in disc electrophoresis, and 10-12 bands in protein were isolated by single and two step procedures. (6) The cottonseed protein could be purified by sephadex G-100 and G-200. (7) 10-20% of gossypol-free cottonseed fluor could be used for animal and human comsumption.

• Korean Journal of Health Education and Promotion
• /
• v.1 no.1
• /
• pp.57-71
• /
• 1983

Sex education is necessary for the youth that they should have an adequate sexual knowledge, attitudes and behaviors in their adolescent period. Four major objectives of this study are as follows; 1. To know the level of sexual knowledge of commercial girl's high school students in Seoul. 2. To know their actual state for the attitudes and behaviors toward sex. 3. To compare the sexual knowledge, attitudes and behaviors of day time school students with those of night time school students. 4. To compare the factors associated with their sexual knowledge, attitudes and behaviors with the individual level. Data were collected on 986 students in Seoul from April 1 to April 10, 1983. As the result of this survey, the following conclusions were obtained. 1. The level of sexual knowledge. (1) The level of knowledge of day time high school students about the physiology of female and pregnancy is shown higher than those of night time students. 64.2% of the respondents are aware of the organ producing ovum. 56.4% the ovulation period. 95.6% the cause of pregnancy. 74.5% the pregnantable period and 12.7% the place of fetilization. (2) Out of 986 respondents. 71.8% knew about contraceptive method correctly, and day time school students knew litter better than night time school students, by showing 73.9% and 69.7% respectively. They knew about contraceptive method with 'oral pills'. 'menstrual cycles', 'condoms'. and 'loops' in the same order. 3) Kinds of veneral disease was correctly known by 37.9%. Day time students knew much better than night time school students. by showing 67.8% and 7.9%. respectively. Transmission method of veneral disease was correctly known by 28.3%. Day time students knew much better than night time students, by showing 51.2% and 5.3%, respectively. (4) The major information source of sexual knowledge was 'book and magazine' (39.9%) and 'friends' (27.4%). 2. Actual state of attitudes and behaviors toward sex. (1) Out of 986 respondents, 84.0% answered that premarital purity should be kept. (2) Out of 986 respondents, 60.8% had an acquaintance of the opposite sex. 45.2% of students with opposite sex reported introduction of their friends as the main channel of making an acquaintance of the opposite sex. (3) Of those who responded to this study 13.8% reported having masturbation, 21.5% kissing, 6.2% petting and 3.7% sex intercourse. (4) 64.8% had sexual problems, which was mensturance (27.2%), aquaintance of the opposite sex (25.4%). The main method to solve the problems were consultation with 'friends' and 'books and magazine' percentage being 39.1% and 30.8%, respectively, whereas very small students discussed with 'teachers' and 'parents' percentages being 0.3% and 5.9%, respectively. (5) Out of 986 respondents, 62.2% had experience in educating about sex, the percentage of day time school was higher than that of night time school. (6) 88.2% of students wanted sex education in school, which were 'general information about sex' (35.4%), 'sexual morality and solution of sexual desire' (18.5%), 'aquaintance of the opposite sex' (13.3%) and 'marriage and role of man and woman' (12.4%) in the same order. They wanted to be instructed about sexes in the lecture of physical education, home economics, biology, military training (59.9%), regular curriculum (17.5%), special lecture (16.9%) and by the counselor or school nurse (5.7%). 3. Analyse concerning the factors about the knowledge, attitudes and behaviors. (1) The better school record was, the higher the level of sexual knowledge. (2) Those who have the religion considered the permarital purity more important than those who have not, the percentage showing 86.7% and 80.7%, respectively. (3) The result of dyad analysis of making acquaintance of the opposite sex in the friendship network showed that a high index of the acquaintance of the opposite sex tends to be a high adoption of making one at the individual level in the group, while the low index tends to be a low adoption of making one in the group.

• Journal of The Korean Association For Science Education
• /
• v.24 no.5
• /
• pp.851-868
• /
• 2004

The main purposes of this study is to develop a web-based STS biology instruction program (WB-STS) for the scientifically gifted students. The specific main research questions were as follows; 1. How can the WB-STS for biology education be developed and what are the primary components involved in it? 2. Is there any proper validity for developed the WB-STS in biology education? To solve the above mentioned problems, several procedures were applied. First, in order to develop WB-STS for the scientifically gifted students, NCISE, Renzulli' s Enrichment Triad Model and the Iowa Chautauqua program's main characteristics were analyzed systematically and the principles and general process for constructing WB-STS were examined. Additionally, the needs of students and the goals of Biology education were identified thoroughly. And then all these ideas were embodied in an agenda for constructing WB-STS. Second, to analyse the validity and utility of developing WB-STS, a questionnaire was developed and submitted to seven specialists and a group of twenty students who would participate in the experiment later. The main results of study are summarized below: First, WB-STS appeared to be successfully constructed based on Renzulli' s Enrichment Triad Model and the Iowa Chautauqua program. Its main features are that it was made emphasizing a learner-centered approach and constructive learning. It is composed of five steps: Scientific theme selection -${\rightarrow}$Exploration ${\rightarrow}$ Concept & Principle Check ${\rightarrow}$ Finding Solution ${\rightarrow}$ Action. Second, seven specialists and a group of students assessed the developed WB-STS's validity and utility with a questionnaire, the results appeared satisfactory. Students showed high interest in WB-STS and gave a positive evaluation of WB-STS.

• Journal of Arbitration Studies
• /
• v.18 no.1
• /
• pp.167-184
• /
• 2008

The economic cooperation between the South and North Koreas is a very important issue for the unification and economic development of both Koreas. In order to reach a successful economic cooperation, there is a need to coordinate the differences of the two countries before unification. The economic cooperation and the cooperation in other sectors will be followed by the entire unification. It is necessary to prepare a mechanism that could peacefully solve the conflicts and disputes that could arise during the actual process of cooperation, which will secure stable investments and trades. The study on the possibility of introducing the arbitration system as a conflict solving mechanism between the two Koreas is a very important subject, and the basis of this study is on the examination of the arbitration laws of North Korea. Therefore, the study on the efficiency of the North Korean arbitration laws on foreign economy is studying the possibility of a systematical solution to economic conflicts between the South and North Koreas. The problems and possible solutions of the North Korean foreign economy arbitration laws are summarized as follows. First, juridical cooperation system for both South and North courts of justice needs to be set up to smoothly carry out the main procedures. Mutual correspondence and telecommunication needs to be guaranteed, also remittance and the movement of goods shall precede. Second, the free liquidation of businesses by unit and the individual and independent management of wealth of the North Korean economic bodies, organizations and businesses shall precede to independently liquidate wealth and thus make arbitration possible. Third, amendments in the North Korea's foreign economy arbitration law shall be made to some parts of regulations on arbitration agreements and specific contents of written arbitration agreements to avoid conflicts regarding arbitration agreement. Fourth, the members of the North Korean arbitration committee shall impartially manage the committee only without taking the role of arbitrator, and the clause that allows the North Korean committee to nominate the arbitrator shall be erased. In case an agreement regarding the number of arbitrators is not reached, the three arbitrators general rule shall be applied. In case of requests from any of the parties, a third country arbitrator nomination shall be guaranteed. Also, the requested arbitrator by the party shall be nominated with the cooperation of the court. Fifth, the trial in case of non-appearance or written trial shall be added to the North Korean law in to prevent intended negligence or evasion. Sixth, regulations regarding the court's investigation of evidence shall be added to the North Korean law to make fair arbitration possible in case that government power is needed in order to investigate evidence. Seventh, provisions regarding majority decision shall be added in the North Korean law in the impossibility of unanimous decisions, and the certified system in the arbitration committee official text shall be erased to prevent arrogation and assure the power of the decision made by the arbitration government. Eighth, as "the wrong decision approved" reason for cancellation of arbitration in the North Korean law includes the content of the decision made by the arbitrator could lead to uselessness of arbitration, amendment will be necessary to limit it to legitimacy of the arbitration agreement and wrong procedures. It is hoped that this thesis will be of important use in understanding the issues on the workability and the solutions to the South and North Koreas' arbitration that could be presented during the negotiations for the countries' economic cooperation.

• Journal of Periodontal and Implant Science
• /
• v.32 no.1
• /
• pp.199-211
• /
• 2002

Digital substraction technique and computer-assisted densitometirc analysis detect minor change in bone density and thus increase the diagnostic accuracy. This advantage as well as high sensitivity and objectivity which precludes human bias have drawn interest in radiologic research area. The objectives of this study are to verify if Radiographic density can be recognized in linear pattern when density profile of standard periapical radiograph with the aluminium stepwedge as the reference, was investigated under varies circumstances which can be encountered in clinical situations, and in addition to that to obtain mutual relationship between the existing standard radiographic system, and future digital image systems, by confirming the corelationship between the standard radiograph and Digora system which is a digital image system currently being used. In order to make quantitative analysis of the bone tissue, digital image system which uses high resolution automatic slide scanner as an input device, and Digora system were compared and analyzed using multifunctional program, Brain3dsp. The following conclusions were obtained. 1. Under common clinical situation that is 70kVp, 0.2 sec., and focal distance 10cm, Al-Equivalent image equation was found to be Y=11.21X+46.62 $r^2=0.9898$ in standard radiographic system, and Y=12.68X+74.59, $r^2=0.9528$ in Digora system, and linear relation was confirmed in both the systems. 2. In standard radiographic system, when all conditions were maintained the same except for the condition of developing solution, Al-Equivalent image equation was Y=10.07X+41.64, $r^2=0.9861$ which shows high corelationship. 3. When all conditions were maintained the same except for the Kilovoltage peak, linear relationship was still maintained under 60kVp, and Al-Equivalent image equation was Y=14.60X+68.86, $r^2=0.9886$ in the standard radiograhic system, and Y=13.90X+80.68, $r^2=0.9238$ in Digora system. 4. When all conditions were maintained the same except for the exposure time which was varied from 0.01 sec. to 0.8 sec., Al-Equivalent image equation was found to be linear in both the standard radiographic system and Digora system. The R-square was distributed from 0.9188 to 0.9900, and in general, standard radiographic system showed higher R-square than Digora system. 5. When all conditions were maintained the same except for the focal distance which was varied from 5cm to 30cm, Al-Equivalent image equation was found to be linear in both the standard radiographic system and Digora system. The R-square was distributed from 0.9463 to 0.9925, and the standard radiographic system had the tendency to show higher R-square in shorter focal distances.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.4
• /
• pp.544-556
• /
• 2011

This study investigated how elementary schoolers (n=159, 9~11 years) and middle schoolers (n=176, 13~15 years) perceived maternal parenting style dimensions, both general and child-feeding related, and whether these dimensions are associated with the subject's food behaviors. The exploratory factor analysis resulted in a solution of 10 parenting dimensions (reasonable guidance, affection and involvement, achievement expectation, clear behavioral regulation, criticism and anger, overprotection, psychological punishment, harsh punishment, punish by withdrawal of child's privileges, and lack of punishment) and 8 child-feeding dimensions (portion control, restriction, pressure to eat, monitor, undesirable model, desirable model, discourage unhealthful eating, and encourage healthful eating) with 49 and 43 items, respectively. Three parenting styles, authoritarian, permissive, and authoritative, were extracted via a second factor analysis using the 10 parenting dimensions. The correlation analysis indicated that authoritarian style was positively correlated with 'restriction' and 'undesirable model', while permissive style was negatively correlated with 'encourage healthful eating' in both groups. Authoritative style was strongly associated with all of the child-feeding dimensions except for 'undesirable model'. For food behaviors, the more likely elementary schoolers and middle schoolers perceived their mothers as authoritarian and permissive, respectively, the more unhealthful foods were consumed. The consumption frequency of healthful foods increased as mothers were perceived to be authoritative. More elementary schoolers of authoritative mothers ate meals with parents. Findings suggest that maternal parenting styles and dimensions, child-feeding dimensions, and child's food behaviors are associated. It may be that authoritarian and permissive styles are more detrimental for elementary schoolers and middle schoolers, respectively, whereas authoritative style is beneficial for both groups in terms of subject's food behaviors.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.23 no.1
• /
• pp.34-40
• /
• 2014

There are several treatment options for rehabilitation of partial edentulism including the use of conventional or implant-retained fixed prostheses. However, such prosthetic options cannot always be possible because of compromised general and oral health (i.e. loss of supporting tissues, medical reasons, extensive surgical protocol and osseointegration failure of dental implant) as well as the affordability of patients. In some cases, removable partial denture provides easier access for oral hygiene procedures and the ability to correct discrepancies in dental arch relationships than implant fixed prosthesis. Recently, Implant Supported Removable Partial Denture (ISRPD) where to place dental implant in strategic position has been suggested to improve the limitation and shortcomings of conventional RPD. ISPRD can overcome mechanical limition of conventional RPD by placing implant in a favorable position and can be cost-effective, prosthetic solution for partially edentulous patients who are not immediate candidates for extensive, fixed implant supported restorations. Incorporation of dental implants to improve the RPD support and retention and to enhance patient acceptance should be considered when treatment planning for RPD. In this case, 59 years old male patient who received dental treatment of implant fixed prosthesis on both side of the upper jaw and implant overdenture on lower jaw showed implant abutment screw fracture on #15i and osseointegration failure on multiple number of implants. After removing failed implants, we planned ISRPD using #15i,24i,25i,26i and #23 natural tooth for RPD abutment. We fabricated #23 surveyed crown,#24i=25i=26i surveyed bridge and #15i gold coping for support,retention and stability for RPD. Periodic follow up check for 2years has been performed since the ISRPD delivery to the patient. No sign of screw loosening, fracture or bone resorption around abutment implants were detected.