• 정보교육학회논문지
• /
• 제10권3호
• /
• pp.299-306
• /
• 2006

교육인적자원부는 ICT 활용 교육을 주도해 나가는데 가장 중심이 되는 교사의 ICT 활용 능력을 신장시키기 위해 다양한 방안들을 수립하여 추진하고 있다. 그러나 현재 시행되고 있는 교사의 ICT 활용능력 신장에 관한 대부분의 노력들은 ICT를 직무활동에 효과적으로 활용할 수 있는 능력보다는 기술소양 능력에 중점을 두고 있다. 그러므로 본 논문에서는 교사의 직무활동을 분석하고, 국내외 교사 ICT 활용능력 평가도구를 비교 분석하여 교사의 ICT활용능력 자기평가 도구를 개발하였다. 또한, 개발된 웹 기반 교사의 ICT 활용능력 자기평가도구를 광주와 전남 지역의 교사를 대상으로 적용하여 성별, 직위별, 지역별, 교육경력별 ICT 활용능력 수준 등을 조사분석하였다.

• 대한화학회지
• /
• 제37권6호
• /
• pp.549-554
• /
• 1993

티타늄 금속판을 공기산화와 수증기 산화하여 만든 Ti$O_{2-x}$ 박막을 시료로 사용하여 1M NaOH 용액에서 광전기화학적 성질을 연구하였다. 높은 온도에서 제조된 Ti$O_{2-x}$ 전극들은 낮은 온도에서 제조된 전극들보다 더 음의 값으로 주어지는 flat band potential($V_{fb}$)과 더 높은 donor density($N_D$)를 가졌다. 전극전위의 변화에 따른 광전류 측정과 Mott-Schottky plot로부터 얻은 $V_{fb}$는 -0.95 ∼ -1.1 V 사이에서 비슷한 값으로 주어졌다. 자외부 영역의 광을 완전히 차단하는 TiO2 단결정을 필터로 하여 가시부 영역의 광전류를 측정할 때 분해능이 좋은 slit를 사용한 경우 좋은 sub band gap 광반응을 볼 수 있었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.24.1-24.1
• /
• 2009

The zinc oxide (ZnO) material as the II-VI compound semiconductor is useful in various fields of device applications such as light-emitting diodes (LEDs), solar cells and gas sensors due to its wide direct band gap of 3.37eV and high exciton binding energy of 60meV at room temperature. In this study, the ZnO nanorods were deposited onto homogenous buffer layer/Si(100) substrates by a hydrothermal synthesis. The Effects of the buffer layer annealing and post annealing temperature on the structural and optical properties of ZnO nanorods grown by a hydrothermal synthesis were investigated. For the buffer layer annealing case, the annealed buffer layer surface became rougher with increasing of annealing temperature up to $750^{\circ}C$, while it was smoothed with more increasing of annealing temperature due to the evaporation of buffer layer. It was found that the roughest surface of buffer layer improved the structural and optical properties of ZnO nanorods. For the post annealing case, the hydrothermally grown ZnO nanorods were annealed with various temperatures ranging from 450 to $900^{\circ}C$. Similarly in the buffer layer annealing case, the post annealing enhanced the properties of ZnO nanorods with increasing of annealing temperature up to $750^{\circ}C$. However, it was degraded with further increasing of annealing temperature due to the violent movement of atoms and evaporation. Finally, the buffer layer annealing and post annealing treatment could efficiently improve the properties of hydrothermally grown ZnO nanorods. The morphology and structural properties of ZnO nanorods grown by the hydrothermal synthesis were measured by atomic force microscopy (AFM), field emission scanning electron microscopy (SEM), and x-ray diffraction (XRD). The optical properties were also analyzed by photoluminescence (PL) measurement.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권10호
• /
• pp.492-499
• /
• 2002

This paper presents the method for an estimation of discharge current waveform in short gap discharge by radiated electromagnetic fields. The method of current waveform estimation is to use the one antenna method (single field method) with a measured electric or magnetic field at given field point by a time domain antenna. In order to verify the availability of the estimation theory, the discharge current waveform estimation was performed by one antenna methods using the measured electric fields of Wilson & Ma and compared with experiments. In addition diagnosis technique for power equipments is able to prevent from large accidents by finding signs of tile accidents before they happen. From the results of the estimation of discharge current, we have a possibility for the application of insulation diagnosis technique for power equipments using S$F_6$ gas. From this point of view, this paper simulated discharge progress and partial discharge by using needle-plan electrodes system in S$F_6$, studied the distribution of frequency spectrum of the radiated electromagnetic waves using a biconical antenna and a spectrum analyzer. From the experimental results of this study, according to the consideration of the mutual relation between frequency spectrum of the radiated electromagnetic waves and discharge progress, it was confirmed that detecting Partial discharge and estimating discharge progress in S$F_6$ could be Possible.

• 한국전자파학회논문지
• /
• 제10권7호
• /
• pp.1138-1147
• /
• 1999

본 논문에서는 단일 패치 안테나로 송수신을 동시에 수행할 수 있는 두 가지 형태의 Ku-밴드 위성통신 용 $2\times$ 마이크로스트립 패치 안테나 구현방안을 제시하였다. 첫 번째 형태는 단일급전 이중공진형 안테나로 9 90도 굽은 단일 급전선과 십자슬맛을 이용한 개구변 결합 급전방식을 적용하여 단일패치 방사소자에서 이중 공진과 서로 다른 직교면파를 만드는 방안을 제시하였으며. 두 번째 형태는 이중급전 이중공진형 안테나로 마이크로스트립 급전과 개구연 급전을 혼합해서 서로 다른 편파를 만들고 패치안테나에서 이중공진을 구현하 는 방안을 제시하였다. 특히 이중급천 이중공진형 안테나의 경우는 공기층을 삽입하여 대역폭을 확장하는 기 술을 적용하였다. 측정된 안테나의 성능을 살펴보면 두가지 형태의 안테나 모두 송수선 겸용안테나로서 동작 됨을 확인하였고, 이중급전 이중공진형 안테나의 경우 대역폭, 편파분리도의 성능이 우수함을 나타냈다.

• 한국세라믹학회지
• /
• 제56권3호
• /
• pp.284-290
• /
• 2019

Ternary MoS₂/graphene (G)-TiO₂ photocatalysts were prepared by a simple hydrothermal method. The morphology, phase structure, band gap, and catalytic properties of the prepared samples were investigated by X-ray diffraction, Raman spectroscopy, scanning electron microscopy, UV-vis spectrophotometry, and Brunauer-Emmett-Teller surface area measurement. The H₂ production efficiency of the prepared catalysts was tested in methanol-water mixture under visible light. MoS₂/G-TiO₂ exhibited the highest activity for photocatalytic H₂ production. For 5 wt.% and 1 wt.% MoS₂ and graphene (5MT-1G), the production rate of H₂ was as high as 1989 µmol^-1h^-1. The catalyst 5MT-1G showed H₂ production activity that was ~ 11.3, 5.6, and 4.1 times higher than those of pure TiO₂, 1GT, and 5MT, respectively. The unique structure and morphology of the MoS₂/G-TiO₂ photocatalyst contributed to its improved hydrogen production efficiency under visible light.

• 한국산학기술학회논문지
• /
• 제17권5호
• /
• pp.269-274
• /
• 2016

본 연구는 호퍼와 같은 공정에서 필연적으로 발생하는 스케일 또는 막힘 현상을 방지하기 위해 적용할 수 있는 저주파 전자해머 구동 시스템의 개발에 관한 것이다. 전자기계식 hammering 구동 방식은 진동과 충격량을 동시에 발생시키는 방식으로, 본 논문에서는 전자해머의 특성을 고찰하기 위하여 전자해머에 장착된 직/병렬 스프링 상수 해석을 하였고 발생에너지는 E코어에 부착된 스프링 상수가 모두 같을 경우에 계산된 등가 스프링 상수와 E코어와 I코어 사이의 동작 변위의 곱으로 계산할 수 있음을 보였다. 또한 전자해머의 충격량을 최대화하기 위하여 맥동파 구동 알고리즘을 적용하였으며, 이 알고리즘은 논리 AND 연산과 마이크로 콘트롤러(atmega128)의 타이머 인터럽트와 PWM 기능을 사용하여 구현하였다. 전자해머의 구동회로는 IGBT로 구성된 H-브리지 방식으로 설계하였고, 가속도계 측정법으로 개발한 전자 해머 시스템의 성능을 검증하였다. 실험 결과 제안한 시스템이 기계적 에너지를 양호하게 발생시킬 수 있으며, 호퍼와 같은 공정에 적용할 수 있음을 보였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.48-48
• /
• 2007

P-type transparent conducting $CuGaO_2$ thin films have been prepared by DC/RF sputtering using Quartz(0001) and sapphire(0001) substrates. The target was fabricated by heating a stoichiometric mixture of CuO and $Ga_2O_3$ at 1373K for 12h under $N_2$ atmosphere. The film were deposited under mixture gas of Ar and $O_2(Ar:O_2=4:1)$ during 10~30min. and the as-deposited films were annealed at 1123K and $N_2$ atmosphere. Room temperature conductivity and the activation energy of the sintered body in the temperature range of 223K ~ 423K were 0 004S/cm, 1.9eV, respectively. XRD revealed that all of the as-deposited films were amorphous. Heating of the films deposited on Quartz substrates above 1123K resulted in crystallization with a second phase of $CuSiO_3$, which was assumed owing to reaction with Quartz substrate. The single phase of $CuGaO_2$ was obtained at the film deposited on the sapphire substrates. The transmittance after annealing of DC- and RF-sputtered films were 55~75% at 550nm. From the transmittance and reflectance measurement. the direct band gap of the DC/RF-sputtered films were 3.63eV and 3.57eV. and there was little difference between DC and RF sputtered films.

• 한국임상수의학회지
• /
• 제34권1호
• /
• pp.34-38
• /
• 2017

The aims of the present study were to determine the weaning time for adoption of kittens, and to evaluate the fetal growth rate during pregnant in free-roaming cats. This study was conducted on three pregnant free-roaming cats (one feral cat and two stray cats). Radiography and ultrasonography were performed on the feral cat and on one of the stray cats. In the feral cat, fetal head diameter was measured once during pregnancy to determine the cesarean section (C-sec) time. In the stray cat, serial fetal head diameter was measured from capture to parturition. The body weight of the feral cat's kittens was measured from 4 weeks postpartum because of their wildness. That of the stray cats' kittens was measured immediately after birth. In the feral cat, scheduled C-sec was performed at predicted parturition day by measurement of head diameter, and six healthy kittens were delivered. The stray cats had five and six kittens by natural delivery, respectively. In the body weight gain of feral and stray cat's kittens, two female kittens of the feral cat lost weight rapidly after they were separated from their mother, so they were returned to their mother for 1 more week. After that, the female kittens grew up without difficulty. Body weight gain of the ten kittens born to the two stray cats consistently increased, by approximately 14 g every day, until they were adopted. The body weight of kittens born by natural delivery was on average 77.5 g greater than that of kittens born by C-sec. However, the gap decreased with time. During the stray cat's pregnancy, fetal head diameter increased by 0.042 cm every day. Maximum head size before parturition was 2.43 cm. These results indicate that the weaning time for adoption of kittens was 5-week-old postpartum.

• Journal of Welding and Joining
• /
• 제27권6호
• /
• pp.68-73
• /
• 2009

Recently, as titanium and titanium alloys are being increasingly used in wide areas, there are on-going researches to obtain high quality weld zone. In particular, growing interest is being drawn to laser welding, which involves low heat input and large aspect ratio in various welding processes and can facilitate shield in atmospheric condition compared with electron beam welding. The first report covered the analysis of embrittlement by the bead color of weld zone through quantitative analysis of oxygen and nitrogen and measurement of hardness as basic experiment to apply laser welding to titanium. Results indicated that the element that affect embrittlement the most was nitrogen, and as embrittlement and oxygenation go on, bead color changed to silver, gold, brown, blue and gray. This study performed butt welding of pure titanium and STS304 by using 1kW CW Nd:YAG laser, and to find out basic physical properties, evaluated welding performance by laser output, welding speed, root gap and misalignment etc, and examined mechanical properties through tensile stress and Erichsen test. The reason particles of pure titanium welded metal and HAZ are greater than STS304 is because they are pure metal and do not include many impure elements that work as nuclei in case of resolidification, thus becoming coarse columnar crystals eventually. In addition, the reason STS304 requires more energy during welding than pure titanium is because the particle size of base metal is smaller.