• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1992.05a
• /
• pp.50-53
• /
• 1992

The GaP crystals are growth by Synthesis Solute Diffusion(SSD) method and its properties are investigated. Etch pits density along vertical direction of ingot is increased from 3.8${\times}$10$^4$cm$\^$-2/ of first freeze to 2.3${\times}$10$\^$5/cm$\^$-2/ of last freeze part. The carrier concentration and mobilities are measured to 197.49$\textrm{cm}^2$/V. sec and 6.75${\times}$10$\^$15/cm$\^$-3/ at room temperature. The temperature dependence of optical energy gap is empilically fitted to E$\_$g/(T)=2.3383-(6.082${\times}$10$\^$-4/T${\times}$/(373.096+T)[eV]. Photo-luminescence spectra measured at low temperature are consist with sharp line-spectra near band-gap energy and radiative recombination between shallow Si-donor to Zn-acceptor and its phonon reprica, and broad emission. The infrared absorption in GaP is cause to phonon coupling modes of TO, LO, LA, TA$_1$, TA$_2$and vibration modes of Ga$_2$O, Si-donor and Zn-acceptor, respectively.

• Journal of Satellite, Information and Communications
• /
• v.9 no.4
• /
• pp.42-46
• /
• 2014

In this paper, a coil typed electromagnetic band gap (EBG) structure to be inserted in the printed circuit board (PCB) inner layer in order to stabilize the PCB power line is proposed and implemented for global-navigation satellite service (GNSS) with the bandwidth from 1.55GHz to 1.81GHz. From the measurement result of the PCB board including EBG structure, the insertion loss(S21) was measured below about -50dB. From these results, it is expected that the stabilization of power delivery network (PDN) structure in the PCB circuit design should be improved and the preparation to EMI will be effective.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.1
• /
• pp.143-150
• /
• 2007

Using a panel data of Korea for $1979{\sim}2002$, this study investigates the determinants of the service sector employment share in Korea. In order to analyze the impact of macroeconomic factors on the service sector's employment share we estimate a simple panel model which is in line with Baumol's model. The panel GMM estimation results show that: 1) The increase in the share of service-related jobs in total employment tends to rise with GDP per capita, which confirms demand-bias hypothesis proposed by Clark. 2) We find that a crucial role in this process has been played by the productivity gap. As Baumol's hypothesis or Baumolis disease, the expansion of the employment share in services relative to industry is the direct consequence of services' lower productivity performances.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1055-1056
• /
• 2007

Asymmetric electro-magnetic force caused by the frictional worn bearing, rotor misalignment and unbalanced rotor etc. generates an asymmetrical operation, vibration and electro-magnetic noise. The need for detection of these rotor eccentricities has pushed the development of monitoring methods with increasing sensitivity and noise immunity. This paper is proposed the analysis method of the squirrel-cage induction motor driven by IGBT inverter using finite element method (FEM) and subroutine. The effect of the unbalanced magnetic pull in the inverter-fed induction motor which is in asymmetrical whirling motion is presented. The analysis results of rotor eccentricity could compare with motors which have been made normal air-gap motor and irregular air-gap motor and verify reliability. The simulation and experiment results can be useful for on-line faults detection monitoring system of induction motors.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1610-1612
• /
• 2005

In this paper, the inductive power collector using electromagnetic induction for vehicle such as the PRT(Personal Rapid Transit) system is suggested and some ideas for power collector design to improve the power transfer performance are presented. The proposed the inductive power collector is used for the PRT system, which has a large air-gap and demands a large electrical power capability. But, low output power is generated due to a loosely coupled characteristic of the large air-gap. Therefore, double layer construction of secondary winding, which was divided in half to increase both output current and output voltage was suggested. Also, a model of power collector and parallel winding structure and a model of concentration/decentralization winding are presented, in addition, the performance of inductive power collector to alignment condition between the primary power line and the inductive power transformer was verified by computer simulation of 2kW model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.183-188
• /
• 2008

Satellite DMB(Digital Multimedia Broadcasting) uses the Cap Filler(GF) that provides a service to the wave shade area of the satellite signal that is a non-line of sight area. The GF is the repeater and the Satellite DMB Systems certainly must construct the GF Network toguarantee the movement reception of the terminal. As the coverage of the GF is formed the Cell or Sector, when the multiple GF is established to be contiguous, the problem of the interference will be able to occur. This paper describes the Satellite DMB system and the GF, and it investigate the design fundamentals plan of the GF Network that it will be able to reduce this problem. As a result, in case of the distance that GF and terminal unit is above 4.6Km, service is not provided because of quality degradation according to mutual interference.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.7
• /
• pp.63-72
• /
• 2018

The purpose of this study was to compare and analyze the pants pattern of the lower body of 70-85 aged women. I tried to present excellent pants pattern that is convenient and suitable for the activities of elderly women. Through this, I tried to provide basic data necessary for making elderly women 's pants. As a result of evaluating the appearance of the pants pattern according to the body type, the fit of the type 2 was evaluated as the highest in the item except the position of the front waist line. For the objective evaluation of the 3D simulation, the air gap of the pants by the body part analysis showed that there was not much difference in the air gap around the waist circumference, hip circumference, thigh circumference, and knee circumference by applying the same drawing method and body size. However, in type 2, the air gap of thigh and knee circumference parts was larger than that of type 1 and type 3. Because type 2's legs were thin but it used same size of hemline. It was thought that it is necessary to adjust the space of front and back crotch length to 1 inch (2.54 cm) instead of 1.9 cm (3/4 inch) so that the waistline position of all three types can be set up a little to cover the abdomen. This study was conducted to investigate changes in body shape of elderly women and to develop appropriate pants patterns.

• The Research Journal of the Costume Culture
• /
• v.26 no.3
• /
• pp.360-376
• /
• 2018

The purpose of this study was to make a pants pattern suitable for women 70 to 85 years of age, then analyze that- pattern's shape, size, appearance, fit, allowance and air gap. Participants made the pattern using 3D simulation program DC Suite version 5.1. The results suggest a design method suitable for the lower-body shapes of elderly women. In external appearance, the A-type earned the highest evaluation in all items except the allowance of the back waist and back hip. The L type earned the highest evaluation in the allowance of back waist and hips. The A-type's, back waist appeared set at an angle that did not match the body shape of an old-old aged woman in the center-back-line setting. Therefore, the pattern method of A-type combined with L-type's method of center back, produces an excellent pants pattern. Evaluation of the air gaps among patterns revealed that; the A-type showed the largest air gap in waist and hip circumference and the smallest air gap in thigh circumference. The waists, abdomen, and hip circumferences of older women often become larger while their legs become slimmer. This study accounted for those factors in determining a pattern suitable for the lower-body shape of old-old aged women. However, participants only analyzed four patterns and compared them with women 70 to 85, years of age. Therefore, it is necessary to develop industrial patterns applicable to a wide age group.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.3
• /
• pp.445-457
• /
• 1997

Poor marginal fidelity resulting in a large marginal gap increases plaque accumulation, gingival inflammation and dental caries. The purpose of this study was to evaluate the marginal fit of three different cervical finishing methods of prepared teeth. A stereomicroscope was used to measure the space between the margin of restoration and the finishing line of prepared tooth. The results were statistically analyzed using the ANOVA and Multiple Range Test(Tukey's HSD). The results were as follows : 1. There were no significant differences concerning the types of tooth and positon (P>0.05), whereas the differences were statistically significant in case of cervical finishing methods (P<0.05). 2. There were statistically significant differences between before and after cementation (P<0.05). 3. In comparison according to variable margins after cementation, the gap discrepancies were increased in $130^{\circ}$ shoulder margin, chamfer margin and $90^{\circ}$ shoulder margin in ascending order, and there were significant differences between $90^{\circ}$ shoulder margin and chamfer, $130^{\circ}$ shoulder margin 4. In comparison according to variable margins, the gap discrepancies were increased in chamfer margin, $130^{\circ}$ shoulder margin and $90^{\circ}$ shoulder margin in ascending order, and there were significant differences between $90^{\circ}$ shoulder margin and chamfer, $130^{\circ}$ shoulder margin. 5. This study demonstrated a better marginal fit with all-ceramic crowns fabricated on chamfer and $130^{\circ}$ shoulder margin compared with $90^{\circ}$ shoulder margin.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.11
• /
• pp.1399-1409
• /
• 2005

The purpose of this study was to analyze the shape of gathered skirts using a three-dimensional measurement system. And in this experiment, I try to accumulate three-dimensional data of wearing model and to figure out analyzing method made by shape of clothes. The experimental design consists of two factorial designs. I set up three different kinds of fabrics, ratio of gathers. Therefore nine samples were made. The instrument and tools for three-dimensional measurement was whole body 3D scanner. Analysis program used in experiment is RapidForm 2004 PP1 and Pattern Design 2000. Data analysis utilizes SPSS WIN 10.0 Package. T-test to effect an inspection of evidence, there was difference about measurement times. One-way ANOVA to analysis effect of gather made by gathering conditions. The following results were obtained; 1. As a result of inspecting an error several times using a three-dimension measurement system, convinced data was obtained. 2. At front, distribution of gap amount was larger than back. And as ratio of gathers increased, distribution of gap amount showed regularly. 3. After analyzing horizontal sectional figure of skirts, as a height of skirt changed from waist to the bottom of skirts, the results showed as follows. While section width, section thickness, node width, node depth increased, node count decreased. 4. With the horizontal section levels of gather skirt, the silhouette on middle hip section was similar with the silhouette of body line. And as ratio of gathers around hip section increased, nodes showed regularly. At the bottom of skirts showed different nodes by different gathering condition.