• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.7
• /
• pp.902-906
• /
• 2004

A separation principle of the Takagj-Sugeno (T-S) fuzzy-model-based observer-control is investigated. When the premise variables are able to be measured or directly computed from the outputs of the T-S fuzzy system and the fuzzy inference rules for the plant, control, and observer share the premise parts, the T-S fuzzy-model-based observer and the T-S fuzzy-model-based control can be separately designed such that the global stabilizability is guaranteed by the fuzzy observer-based output-feedback control. In this case, the global separation principle is well established. On the other hand, when the premise variables are unmeasurable or cannot be computed from the outputs, they should also be estimated. We examine the separation principle of this case. If the decay rates of the T-S fuzzy-model-based control and observer are sufficiently fast, the global separation is assured. Otherwise we show that the separation principle holds locally.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.5
• /
• pp.520-525
• /
• 2003

This paper concerns a design methodology of observer-based output-feedback digital controller for Takagi-Sugeno(TS) fuzzy systems using intelligent digital redesign (IDR). The term of IDR involves converting an analog fuzzy-mode-based controller into an equivalent digital one in the sense of state-matching. The considered IDR problem is viewed as convex minimization problems of the norm distances between linear operators to be matched. The stability condition is easily embedded and the separations principle is explicitly shown.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1304-1305
• /
• 2015

본 논문은 타카기--수게노 퍼지 다개체 시스템의 상태 일치를 위해, 관측기 기반 출력 궤환 퍼지 제어기의 설계 기법을 제안한다. 각 개체간의 통신 네트워크는 그래프 이론을 통해 나타내며, 제어기의 설계 조건은 선형 행렬 부등식으로 표현한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.415-418
• /
• 1996

Etching Process, one of the most important process in semiconductor fabrication, has input control part of which components are pressure, gas flow, RF power and etc., and plasma gas which is complex and not exactly understood is used to etch wafer in etching chamber. So this process has not real-time feedback controller based on input-output relation, then it uses EPD(End Point Detection) signal to determine when to start or when to stop etching. Various type EPD controller control etching process using EPD signal obtained from optical intensity of etching chamber. In development EPD controller we concentrate on compensation of this signal intensity and setting the relative signal magnitude at first of etching. We compensate signal intensity using neural network learning method and set the relative signal magnitude using fuzzy inference method. Potential of this method which improves EPD system capability is proved by experiences.

• 전자공학회논문지 IE
• /
• v.46 no.2
• /
• pp.33-45
• /
• 2009

In this paper, the implementation of the backward movement control of a truck-trailer type mobile robot using fuzzy model based control scheme considering the practical constraints, computing time-delay and quantization is presented. We propose the fuzzy feedback controller whose output is delayed with unit sampling period and predicted. The analysis and the design problem considering the computing time-delay become very easy because the proposed controller is syncronized with the sampling time. Also, the stability analysis is made when the quantization exists in the implementation of the fuzzy control architectures and it is shown that if the trivial solution of the fuzzy control system without quantization is asymptotically stable, then the solutions of the fuzzy control system with quantization are uniformly ultimately bounded. The experimental results are shown to verify the effectiveness of the proposed scheme.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.2
• /
• pp.185-190
• /
• 2009

In this paper, an observer-based intelligent controller for the nonlinear networked control systems with packet loss is proposed for wireless sensor network. For the intelligent control of the nonlinear system, it uses the fuzzy system with Takagi-Sugeno (T-S) fuzzy model. The observer is designed for the fuzzy networked control system, and the output feedback controller is proposed for the stability of estimates and errors. The stability condition of the closed-loop system with the proposed controller is represented to the linear matrix inequality (LMI) form, and the observer and control gain are obtained by LMI. An example is given to show the verification discussed throughout the paper.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.3
• /
• pp.110-115
• /
• 2002

This paper proposes the adaptive fuzzy control system using the microprocessesor for high precision control of automation systems which exist non-linearities such as saturation, relays, hysteresis, and dead zones. The proposed system which provides the improvement in terms of the control region in transient and adaptive control, first used the frequence-locked mothed driving a system to generate a output voltage proportional to the frequency diffierence of relnence input signal and feedback signal for fast transient response,, and when the error reaches the preset value, used the adaptive fuzzy logic for precision control. The theoretical and experimental studies have been carried out. The presented results from the above investigation show considerable improved performance in the precision control of servo control systems.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.04a
• /
• pp.48-51
• /
• 2007

본 논문에서는 비선형 상호 결합 시스템의 출력 궤환 제어기 설계에 대해서 연구한다. 먼저 퍼지 모델 기법을 이용하여 비선형 상호 연결된 시스템을 Takagi-Sugeno (T-S) 퍼지 모델로 모델링한다. 그 각각의 하위 시스템에 대한 출력 궤한 제어기를 동적 병렬 분산 보상 (DPDC) 기법을 이용하여 퍼지 출력 궤환 제어기로 설계한다. 하위 시스템들의 평형점이 안정화 되는 선형 행렬 부등식 (LMI)를 구하고, 그 부등식을 만족하는 값들로부터 하위 시스템의 제어기 이득을 구한다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1781-1782
• /
• 2008

본 논문은 시간 지연을 가지는 이산 시간 비선형 상호 결합 시스템의 분산 퍼지 출력 궤환 제어기의 설계에 대해 연구한다. T-S(Takagi-Sugeno) 퍼지 모델 기법을 이용하여 퍼지 상호 결합 시스템을 구한다. 이를 바탕으로 분산 퍼지 출력 궤환 제어기를 설계하고, 폐루프 시스템의 안정도 충분 조건을 선형 행렬 부등식 (LMI)의 형태로 나타낸다. 설계된 이득값을 통하여 상호 결합 시스템이 안정화됨을 모의실험을 통하여 보인다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2008.04a
• /
• pp.377-380
• /
• 2008

본 논문은 시간 지연을 가지는 비선형 상호 결합 시스템에 대한 분산 퍼지 출력 궤환 제어기를 제시한다. Takagi-Sugeno (T-S) 퍼지 모델링을 통하여 비선형 상호 결합 시스템을 퍼지 모델로 표현한다. 상호 결합 시스템의 하위 퍼지 시스템을 안정화 시킬수 있는 분산 출력 궤한 제어기를 설계한다. 폐루프 하위 시스템들의 안정도 조건을 선형 행렬 부등식으로 나태내고, 부등식을 이용하여 제어기의 이득값을 구한다. 모의실험을 통하여 시간 지연이 있는 비선형 상호 결합 시스템에 대한 분산 퍼지 출력 궤한 제어기의 효용성을 평가한다.