• The Research Journal of the Costume Culture
• /
• v.25 no.4
• /
• pp.476-487
• /
• 2017

The purpose of this study was to suggest torso patterns that fit the three main body shapes of elderly obese women. To reduce time, costs, and also the trial and error needed to make patterns, the CLO program for 3D test wear was employed. Three virtual models for aged obese women were use, with the YUKA system used to produce torso patterns. 3D simulation of test wear and corrections was done to design optimal torso patterns. The results were as follows: First, for the three models of obese women's body shapes as realized by CLO 3D, Type 1 is lower-body obesity shapes, Type 2 is abdominal obesity shapes, and Type 3 is whole-body obesity shapes. Second, to design the study patterns, actual measurement values, back waist length and waist to hip length, were used. The armhole depth (B/4-1.5), front interscye (B/6+2.3), front neck width (B/12-0.5), front neck depth (B/12+0.5), front waist measurement (W/4+ 1.5+D), front hip measurement (H/4+2+0.5), and back hip measurement (H/4+3-0.5) were calculated using formulas. Third, according to the results of test-wearing the study patterns, reduced front neck width and depth improved the neck fit and reduced armhole depth bettered loose or plunging armhole girth and also reduced the sagging of bust c.. Also, tight sidesfrom aprotruded waist and abdomen improved with the increase of surpluses in the back waist and also back and front hip c. The exterior was enhanced by displacement of back and front darts, which distributed surpluses better.

• Journal of the Korean Society of Costume
• /
• v.51 no.7
• /
• pp.147-165
• /
• 2001

The objective of this study was to develop the Jeogori Pattern for 9 to 10 year-old boys To determine the measurement items for the Jeogori Pattern making, applied factor analysis, correlation analysis and regression analysis to the 37 measurement items of the 9 to 10 year-old boys classified as a standard somatotype. To understand the shape and variation of the body surface, analyzed the replica of the upper body surface that was obtained by the method of using surgical tape. Be based on the results of the above studies, designed the Jeogori Pattern. The designed pattern was evaluated by the sensory test. The drafting methods of Jeogori Pattern obtained are as follows. $\circled1$ The measurement items are Bust Girth, Center Back Waist Length, Neck Width, and Hwajang Length. $\circled2$ Jeogori Length Center Back Waist Length$\times$4/3 $\circled3$ Front Body Girth(1/2) : B/2 + 1.5cm Back Body Girth(1/2) : B/2 + 3.5cm $\circled4$ Jin-Dong : B/4 + 3cm $\circled5$ Back Godae Width(1/2) : Neck Width/2 + 1.7cm Front Godae Width(l/2) : Back Godae Width(1/2) - 2cm $\circled6$Back Godae Point is 1.5cm higher than shoulder line, and Front Godae Point is 1.5cm lower than shoulder line. $\circled7$ Back Godae Depth: 1.2cm + 1.5cm = 2.7cm The Jeogori Pattern designed by the above method Is as (fig. 8) The results of the sensory test of the new pattern are as fellows. Except for 2 items, every mark of 24 test items has over 5.0 point and a total average mark is 5.25 point. Witch is a good mark. Therefore the new pattern is valid. Especially, the parts of Git, sleeves and back face have a high mark, so the appearances of those parts are excellent.

• Journal of the Korean Society of Costume
• /
• v.42
• /
• pp.163-172
• /
• 1999

The purpose of this study is to classify the types of torso of adult females using the tight fitting technique and pattern development figure. The subjects are 106 females of 19 to 24 years old. 59 different items are measured from body surface development and analyzed by factor analysis and cluster analysis. The results are as follows; 1. Eight somatotype factors are obtained through factor analysis and orthogonal rotation by the method of Varimax Factor 1 is the length of upper body factor 2 the length of lower body factor 3 the circumference and width of the back of upper body factor 4 the circumference and width of front torso factor 5 the dart type of the back of upper body factor 6 the size of the back neck factor 7 the type of the front shoulder and factor 8 the size of the back arm hole. 2. As a result of cluster analysis the somatotype of torso is classified into 5 types. Type 1 is normal in length circumference and width of upper body. Type 2 is shortest length circumference and width of torso. Type 3 is long in length circumference and width of torso. Type 4 is normal length and short in circumference and width especially short in bust circumference. Type 5 is longest in length circumference and width of torso.

• Journal of the military operations research society of Korea
• /
• v.14 no.1
• /
• pp.53-62
• /
• 1988

A patroller is to protect a patrol area with a certain length front D by proceeding at constant speed on courses parallel to the patrol front, traveling back and forth between area boundaries and reversing course at each area boundary. Transitors enter the area uniformly distributed across the patrol front on a course perpendicular to the patrol front. Any transitor that closes the patroller to within his sweep radius R is detected. This paper use plane trigonometry to derive the theoretical probailities of detection and develop a Monte Carlo computer simulation Model.

• Journal of the military operations research society of Korea
• /
• v.13 no.2
• /
• pp.53-62
• /
• 1987

A patroller is to protect a patrol area with a certain length front D by proceeding at constant speed on courses parallel to the patrol front, traveling back and forth between area boundaries and reversing course at each area boundary. Transitors enter the area uniformly distributed across the patrol front on a course perpendicular to the patrol front. Any transitor that closes the patroller to within his sweep radius R is detected. This paper use plane trigonometry to derive the theoretical probailities of detection and develop a Monte Carlo computer simulation Model.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.9_10
• /
• pp.1048-1059
• /
• 2003

This study focusses pattern draft and grading of jeans for women in their 20s, who consume jeans the most. Pattern was drafted based on existing patterns collected from companies. It is different from the existing educational patterns. It suggests new sizing system for twenties referring to sizes used companies and grading rule and method. he results were as follows; 1. Companies manufacture 2-8 sizes and they referred to the Korean Industrial Standards, KS K 0051, for their sizing system. 2. Drawing method for Pattern of the study had following measurements for each part: in the case of waist circumference, front part was W/4+1.5cm, back part was W14+2cm, front hip circumference was H/4-1.5cm, crotch line was the crotch length (practical measurement), hip circumference was (upper crotch line length)/5+0.5cm, front crotch part was 2.7cm, back crotch part was W/5+2.7cm, knee height was (the length of leg)/2+6cm and the circumference of knee and the tip of pants were 40cm. Through the wearing test on the subject of twenties, researched pattern received higher ratings, especially in appearance than the existing pattern. 3. 5 sizes system was made referred to the sizing system of companies and National Anthropometric Survey of Korean in 1997 Grading rule for 12 grading points of front part and 13 grading points of back part was suggested. Results of wearing test on the graded patterns showed high ratings similar to standard size.

• The Research Journal of the Costume Culture
• /
• v.14 no.2
• /
• pp.271-285
• /
• 2006

The purpose of this study was to develop a new basic skirt pattern for 4 lower body types of Plus-sized women. To reduce a time and economic loss about putting it on, This study applied a 3D sample module in the course to develop a basic skirt pattern which is fit, functional and beautiful. A data analysis used the SPSS 11.0 statistics program. To verify the difference, This study used the variance analysis and Duncan's test for the postmortem verification. The result was as follows. To reflect a feature according to an abdomen projection and hip projection, we added the maximum hip circumference to the waist circumference and hip circumference for necessary for a skirt draft item. The front hip circumference sets to the H/4+1cm(ease)+D/4. The back hip circumference set to the H/4+0.5cm(ease)+D/4. The D is the hip circumference in the maximum hip circumference to subtract. The front waist circumference sets to the W/4+0.5cm(ease)+0.5cm(A front and back's difference)+D/4. The back waist circumference sets to the W/4+0.5cm(ease)-0.5cm(A front and back's difference)-D/4. Compare with 4 lower body types of Plus-sized Women, A type 2 and type 4 abdomen projections are bigger. We raised a front waistline of skirt pattern to a 0.3cm upside, and take about 1.3cm down the skirt length from a developed skirt pattern. Consequently, the appearance of a front skirt length was improved with a side skirt length.

• Fashion & Textile Research Journal
• /
• v.15 no.6
• /
• pp.1000-1009
• /
• 2013

Well-fitting riding breeches provide a comfortable ride. Horse-riding breeches should fit the lower body with patches located on the inside of hip and knees to prevent tears and slips. This study provides information about the fit of women's breeches using 3D human body scan data wearing commercially available two breeches according to posture. To get information about breeches fit, we measured the angle of waist line, the length, and the area of the breeches fit on four 20's women. This research showed the problem which was down for waist back line in the case of the horseback riding pose. The back waistline of the riding breeches should be raised compared to the front waistline; subsequently, an increased waistline angle results in less back waistline decrease. The breeches have plenty of length from back waist to crotch so the breech fit can be improved. The thigh circumference increased when riding in the front; therefore, good elasticity of the weft direction of the fabric is recommended. The length increase and the peripheral increase of the front knee significantly increased the surface area of the knee; consequently, knee patch material should be a two-way elastic fabric in all directions to enhance comfort according to riding motion.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.1
• /
• pp.113-127
• /
• 1996

In this study, the pattern was copied by the method of Tight Fitting Techinque, which resulted from the changed body by the upper limb motion-front-vertical motion(or vertical motion in front), side-vertical motion, and horizontal motion. And, this study analyzed the change of the pattern and the observed items dimension changed to the pattern. The results are as follows: 1. In the observation of the degree of the pattern change according to the motion of upper limb, the result provides that the motion change in the range of $135^{\circ}$ to $180^{\circ}$ is the largest in front-vertical motion, $45^{circ}~90^{\circ}$ in side-vertical motion, and $0^{circ}~45^{\circ}$ in horizontal motion respectively. 2. The probability test result of the items of the motion is more related with the horizontal width item rather than the vertical length item in the front and back pattern where the back pattern has more effect than the front pattern. And the upper limb-surrounding items are more related than any otheer item. 3. The change of the pattern according to the motion shows the decrese of the neck width and the shoulder legth, the rising of the point of shoulder (or shoulder point) and armpit point, the decrease of the pattern width and the increase of the pattern length. As the angle of the motion grows vertically motion. The change of the shoulder length in the horizontal motion is smaller than that vertical. But as the angle of the motion grows horizontally, it has a tendency of decreas in th width of the front patten and the length of the pattern, whereas the width of the back pattern is noticeably increases.

• The Research Journal of the Costume Culture
• /
• v.12 no.3
• /
• pp.415-428
• /
• 2004

The purpose of this thesis was to develop torso patterns according to the physical types of men in 20s. The procedure and results are as follows; 1. Of the men in 20s meeting the national average of physique, 4 men were selected and classified into 2 physical types according to their chest and waist circumference drops. One group had 20㎝ drop (Y type) while the other had 16㎝ drop (N type). Through evaluation performed by clothing construction professionals on the 4 upper bodice blocks drafted according to the existent drafting method and dressed on the 4 men, several problems have been found. These problems were adjusted and supplemented to make two new blocks. The fit of the new blocks were evaluated and proved to be satisfactory. 2. The following is the adjustments made to the existent men's torso patterns which had been utilized as the objects the first evaluation experiment. ① Though the back waist length of the pattern from the existent drafting method covered the center back length of the body in both Y type and N type, the front length did not causing it to stand away from the body. To adjust this, 2.0㎝ has been added to the center front length of each pattern so that the waist line could make a bar level to the ground. ② The shoulder line of the pattern from the existent drafting method had the tendency to fall backward. To make the shoulder line to fall in place, it has been moved 1.0㎝ to the front. 0.5㎝ has been added to the should length. ③ The neckline had a tendency to climb up. It has been lowered by 0.5㎝ until the line touched the center front neck point. ④ Though different in degree, the neck circumference did not allow enough width for both physique type causing the neckline to pull at side neck point with diagonal crease. To adjust this, 0.3㎝ and 0.6㎝ has been added to the Y type and N type respectively so that the neckline would touch the side neck point and the neckline could naturally fall into its original position. ⑤ Though different in degree, there was not enough space at the armhole causing wrinkles around this area. Therefore, 0.25㎝ and 0.5㎝ has been added to the front and back of the armholes of the Y and N types respectively. The armhole was made 1.0㎝ deeper only for the N type. ⑥ 1.0㎝ in the front and 0.5㎝ in the back were added to the side scam for the Y type while 0.5㎝ in the front and 0.25㎝ in the back were added for N type. This eliminated the unwanted wrinkles to give the silhouette a smooth look.