• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04a
• /
• pp.133-135
• /
• 2003

최근 인터넷 기반 서비스 환경의 질적개선과 이에 따른 이용자 증가에 따라. 오디오나 동영상과 같은 규모가 크고 동적 특성을 가진 웹 컨텐츠의 수가 증가하는 추세이다. 이에 따라 'hit ratio' 뿐만 아니라 오브젝트의 크기를 기반으로 하는 'byte hit ratio' 또한 캐시 성능을 평가하는 중요한 측정 요소가 되었다. 이러한 측정기준을 대상으로 할 때, 기존의 웹 캐시 교체 정책중 HP연구소의 GDSF (Greedy-Dual-Size with Frequency)알고리즘과 LFU-DA(LFU with Dynamic Aging)알고리즘이 우수한 성능을 보이는 것으로 알려져있는데, 이러한 기존의 웹 캐시 교체 정책은 서버와의 네트워크 상태를 고려하지 않은 정책이고, 이에 따라 네트워크 상태에 따른 전송비용의 차이를 반영하지 못하고 있다. 따라서 본 논문에서는 서버와 웹 캐시 간의 네트워크 상태를 반영할 수 있는 캐시 교체 정책을 제안하고, 이에 대한 실험을 수행하였으며, 그 결과 사용자의 요구에 대한 응답시간의 감소 효과를 얻을 수 있었다.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.949-952
• /
• 1996

The ultrasonic motor(USM) has good characteristics such as compact size, silent motion, low speed, high torque and high speed response. The USM is driven by 2-phase AC electricity. The control parameters of USM are voltage, phase difference, frequency of input power, etc. In this paper, we propose voltage difference control. And we designed USM controller to adjust voltage and phase using pLSI(programmable Large Scale Integration). Voltage difference control has many advantages that are lower current, lower power than phase difference control. Especially there is nearly zero ampere at the zero point of speed and torque. we can apply this voltage difference control to the compliance control of DD manipulator.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.980-983
• /
• 1996

This paper presents the method of determining state feedback gains of XPTOS for disk drive servomechanism based BESSEL filter prototype. A typical disk drive actuator can be modeled as second order dynamics for low frequencies. However, the response at higher frequencies shows resonant behavior which cannot be easily modeled. XPTOS consists of the nonlinear control region and the linear control region. In the linear control region, the poles of a second order nominal model of plant must be properly relocated by pole placement technique to attenuate resonant modes at high frequency and to attain minimum time state transition. It is difficult to select position to satisfy this object because velocity feedback gain is subjected to position feedback gain in XPTOS. Here poles of BESSEL filter prototype are selected to determine state feedback gains of XPTOS. Simulation results for disk drive servomechanism using XPTOS having state feedback gains by the proposed method are presented.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.834-836
• /
• 2003

This paper describes the optimal design, construction and performance evaluation of coaxial shunts used in high current testing laboratory for current measuring system. These shunts, which are of tubular type coaxial shunts, the currents to be measured range from Amperes to several kiloAmperes, and the frequency of the signals has a bandwidth from DC to megaHertz. The shunt must have the mechanical strength to support the forces produced by the transient current, above all, the measuring capabilities of shunt are dependent upon short response time and it must be as free as possible of inductive effects. In this paper presents both characteristic of shunt and design of tubular type coaxial shunt.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1135-1137
• /
• 2003

The conventional DTC strategy provides a fast torque response even though it has very simple scheme consisted with only two hysteresis band comparators and a switching table for torque and flux control. Drawbacks of the conventional BTC are relatively high torque ripple at low speed and variation of the switching frequency according to motor speed. In this paper, the new direct torque control(BTC) schemes are proposed. Those schemes are based on the torque slope and and flux to reduce the torque ripple.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1577-1579
• /
• 2003

AlN thin films are prepared on Si (111) substrate by RF magnetron sputtering. Two-step deposition method is proposed to obtain AlN thin films with high c-axis (002)-TC value and low surface roughnesses. For all the deposited AlN films, the c-axis (002)-orientation, surface mophology, and roughness are characterized in terms of deposition conditions FEAR devices with Al/AlN/Mo/Si(111) configuration are also fabricated. From the frequency response characteristics, the return loss and electromechanical coupling contant($k_t{^2}$) are estimated.

• Journal of Sensor Science and Technology
• /
• v.29 no.3
• /
• pp.141-148
• /
• 2020

To find food, homes, and mates, some animals have adapted special sensing capabilities. Rather than using a passive method, they discharge a signal and then extract the necessary information from the response. More importantly, they use the slope of the detected signal to find the destination of an object. In this paper, similar strategy is mathematically formulated. A perturbation and correlation-based gradient estimation method is developed and used as a sensing strategy. This method allows us to adaptively sense an object in a given environment effectively. The proposed strategy is based on the use of gradient values; rather than instantaneous measurements. Considering the gradient value, the sampling frequency is planned adaptively, i.e., sparse sampling is performed in slowly varying regions, while dense sampling is conducted in rapidly changing regions. Using a temperature sensor, the proposed strategy is verified and its effectiveness is demonstrated.

• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.219-222
• /
• 2015

The kinetic analysis of energetic materials using Differential Scanning Calorimetry (DSC) is proposed. Friedman Isoconversional method is applied to DSC experiment data and AKTS software is used for analysis. The frequency factor and activation energy are extracted as a function of product mass fraction. The extracted kinetic scheme does not assume multiple chemical steps to describe the response of energetic materials; instead, multiple set of Arrhenius factors are used in describing a single global step. The proposed kinetic scheme has considerable advantage over the standard method based on One-Dimenaionl Time to Explosion (ODTX). Reaction rate and product mass fraction simulation are conducted to validate extracted kinetic scheme. Also a slow cook-off simulation is implemented for validating the applicability of the extracted kinetics scheme to a practical thermal experiment.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.6 no.6
• /
• pp.49-57
• /
• 1992

This paper proposes a Intel 8097 single-chip microprocessor based instantaneous voltage control scheme of inverter for UPS(Uninterruptible Power Supply). There microprocessors are used to control the output voltage and frequency of the inverter, the synchronization with by-pass, and the switching of the static switch. And the status and operating conditions of UPS systems is monitored by micro processor. The inverter output voltage is controlled instantaneously with a double regulation loop so that it has very good dynamic response for the varying loads or nonlinear loads as a rectifier. And also, the software and hardware of control system is described. From simulation and experimental results, it is shown that the proposed scheme has very good performance.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.74-77
• /
• 2006

A scanned Fabry-Perot(F-P) filter and a Multi-Channel Wavelength Locker(MCWL) were used to interrogate fiber Bragg grating sensor array. When the F-P filter scans over the MCWL which works as a multi-reference the temporal peaks profiles correspond to the locking wavelengths. To solve the linearity, stability, and accuracy problems caused by the nonlinear response of F-P filter, a polynomial fitting algerian was used to calculate the relationship between the peak locations and the wavelengths in all the scanning range. Then from the reflected peaks locations and the best fitting line, the Bragg wavelengths can be obtained. The measurement linearity was greatly enhanced with wavelength resolution of about 4 pm in 10Hz scanning frequency.