• 한국건설관리학회논문집
• /
• 제12권3호
• /
• pp.11-21
• /
• 2011

비정형 건축물은 건축가의 디자인 의도를 반영한 다양한 형태의 외장 디자인을 포함한다. 이러한 비정형 형태의 외장부재는 NURBS (Non-Uniform Rational B-Spline) 라 불리는 이 방향 곡률로 구성된 불규칙한 자유곡선면을 포함하고 있어 실제 외장부재의 생산 및 시공을 위해서는 3차원 비정형 BIM 기술을 적용한 패널최적화 단계를 거쳐야 한다. 본 연구에서는 역공학(Reverse Engineering) 기법을 근간으로 사례연구를 통해 비정형 건축물 BIM 도구인 디지털 프로젝트를 활용하여 패널형태를 구축하고 패널 최적화 결과를 도출한다. 최적화 결과 도출된 비정형 패널부재의 곡률 형상에 따른 Mock-Up 패널제작을 통해 패널종류에 따른 제작 용이성을 테스트하고 레이저 스케닝 기술을 사용하여 설계한 패널과 생산된 패널과의 데이터를 비교함으로써 이방향 곡률 곡면부재의 제작정밀도를 분석한다. Mock-Up 부재 제작 시 전문가 인터뷰를 통하여 국내에서 수행되고 있는 현행 비정형 외장부재 생산방식의 문제점을 도출하고 개선방안을 제시한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.6-7
• /
• 2021

Although the development of free-form architectural technology continues, it consumes a lot of money and time due to the one-time formwork and the difficulty of maintaining quality due to manual work. To this end, in this study, a shape connection technique was proposed and verified to improve the limitations of implementing the curved surface of the existing lower multi-point press. In order to improve the accuracy of the shape, a curved surface was implemented using a silicon cap and a silicon plate. As a result of the error analysis of the shape, a small value of less than 3 mm was found. This study can implement more accurate curved surfaces than conventional technologies and produce high-quality free-form panels.

• Steel and Composite Structures
• /
• 제24권1호
• /
• pp.113-128
• /
• 2017

This paper highlights a study undertaken on the free vibration of a precast steel-concrete composite slab panel for track support. The steel-concrete composite slab track is an evolvement from the slab track, a form of ballastless track which is becoming increasingly attractive to asset owners as they seek to reduce lifecycle costs and deal with increasing rail traffic speeds. The slender nature of the slab panel due to its reduced depth of construction makes it susceptible to vibration problems. The aim of the study is driven by the need to address the limited research available to date on the dynamic behaviour of steel-concrete composite slab panels for track support. Free vibration analysis of the track slab has been carried out using ABAQUS. Both eigenfrequencies and eigenmodes have been extracted using the Lanczos method. The fundamental natural frequencies of the slab panel have been identified together with corresponding mode shapes. To investigate the sensitivity of the natural frequencies and mode shapes, parametric studies have been established, considering concrete strength and mass and steel's modulus of elasticity. This study is the world first to observe crossover phenomena that result in the inversion of the natural orders without interaction. It also reveals that replacement of the steel with aluminium or carbon fibre sheeting can only marginally reduce the natural frequencies of the slab panel.

• 한국건축시공학회지
• /
• 제23권3호
• /
• pp.251-260
• /
• 2023

비정형 건축물은 외부면이 다양한 곡선이기 때문에 비정형 거푸집은 맞춤제작되어 사용된다. 비정형 거푸집 제작에 있어 재활용이 가능한 Phase Change Material(PCM)과 곡률구현에 용이한 Ultra-High Performance Concrete(UHPC)가 사용된다. 그러나 PCM은 약 58~64℃가 융점이며, UHPC의 수화열로 PCM 거푸집이 손상될 수 있어 실험을 통해 형상을 확인한다. 실험은 제작한 PCM 거푸집에 Silicone sheet 3mm를 설치한 (A)와 설치하지 않은 (B) 거푸집에 UHPC를 타설한다. 실험결과 (A) 3.793mm, (B) 5.72mm가 측정되었으며, (B) 거푸집이 수화열에 취약한 것으로 분석되었다. 이러한 연구는 초고강도 비정형 패널 및 PCM 거푸집 제작 관련 기초자료로 활용될 것으로 기대된다.

• 한국건축시공학회지
• /
• 제22권6호
• /
• pp.565-575
• /
• 2022

최근 디지털 설계기술의 발전에 따라 건축가의 창의성을 극대화한 비정형 설계가 급증하고 있다. 그러나 다양한 비정형 곡면을 구현하기에는 많은 어려움이 발생하고 있다. 비정형 형상구현을 위한 패널분할은 mesh, developable surface, tessellation, subdivision 등의 분할기법이 적용된다. 비정형 패널의 제작 시 이러한 분할기법의 적용과정은 복잡하고 생산데이터 추출에 많은 인력과 시간이 투입된다. 따라서 비정형 건물의 설계 후 패널제작을 위한 생산데이터 추출과정을 빠르고 체계적으로 수행할 수 있는 알고리즘이 필요하다. 이에 본 연구는 빌딩모델, 생산장비 성능, 패턴정보를 종합적으로 고려하여 비정형 패널의 생산데이터 자동생성을 위한 수학적 알고리즘을 제시하는 것을 목적으로 한다. 이를 위해, 패널분할 시 수학적 알고리즘을 제시하였고, 비정형 곡면으로의 Mapping을 통해 CNC 장비를 위한 생산데이터를 추출하였다. 본 연구의 결과는 비정형 콘크리트 패널 생산을 위한 데이터 자동생성을 가능하게 하여 생산성 향상과 원가절감에 기여한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.70-71
• /
• 2019

Glass fiber reinforced concrete (GFRC) is very suitable as a material for free-form concrete panels (FCPs) because of its lightweight, strong, moldable, durable and sustainable properties. GFRC is superior in construction and maintenance compared with materials such as steel, aluminium, titanium, glass and plastic, and is advantageous in cost. However, GFRC is being produced by skilled craftsmen, and still lacks the technology to economically produce high quality FCPs. Currently, there is a technology to automatically and accurately produce FCPs. However, the developed technology can not be applied to the field with simple production technology without production line for mass production. To solve this problem, the purpose of this study is a basic study of production system development of free-form concrete panels. This study introduces the developed FCPs production technology and builds FCP production system for mass production. The results of this study will be used as basic data for the commercial production of FCPs in the future.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권3호
• /
• pp.478-489
• /
• 2015

In the present study, a hydrodynamic hull-form optimization algorithm for a container ship was presented in terms of the minimum wave-making resistance. Bell-shaped modification functions were developed to modify the original hull-form and a sequential quadratic programming algorithm was used as an optimizer. The wave-making resistance as an objective function was obtained by the Rankine source panel method in which non-linear free surface conditions and the trim and sinkage of the ship were fully taken into account. Numerical computation was performed to investigate the validity and effectiveness of the proposed hull-form modification algorithm for the container carrier. The computational results were validated by comparing them with the experimental data.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.181-182
• /
• 2015

The production technologies of free-form concrete panels are emerging to satisfy the need of modern complex shaped in architectural design. This study aims for introducing and improvising the innovative technique called Rod type mold that overcomes the difficulties in some extent by enabling the mold to be used many times, making the shape of the mold adjustable in a flexible way and describing its production process to provide the alternative solution for the construction of free-form mold with considering the features including reusability and optimization cost across its production process. In this study, the freeform concrete panel shape was designed and experiment was done using computerized numeric control machine and rod type mold. The problems appeared on achieving desired shape while operating on rod type mold. The process of identifying all the root causes and contributing causes that may have generated an undesirable condition were done. Consequently, the conical or semicircular shaped was proposed for the end of Numerical control rod and replaced it with the existing flat shaped end to avoid the detachable problem and to improve rod type mold performance.

• 대한조선학회논문집
• /
• 제40권4호
• /
• pp.8-15
• /
• 2003

This paper presents the method for developing an optimum hull form with minimum wave resistance using SQP(sequential quadratic programming) as an optimization technique. The wave resistance is evaluated by a Rankine source panel method with non-linear free surface conditions and the ITTC 1957 friction line is used to predict the frictional resistance coefficient. The geometry of the hull surface is represented and modified using B-spline surface patches. The optimization method is applied to Series 60 hull and KCS(KRISO 3600 TEU Container Ship). The obtained results prove that the method is appropriate for preliminary hull form design.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.133-134
• /
• 2023

Free-form buildings have a curved shape and are composed of geometric shapes, which require high precision. Therefore, this study proposed a new extrusion method, a piston method, that improves the precision of FCP by automatically extruding a predetermined amount of concrete by improving the aforementioned limitations. The technology to extrude a predetermined amount of concrete by applying pistons is expected to shorten construction period and increase economic efficiency by improving the precision and productivity of free-form panels.