• 아시안잔디학회지
• /
• 제20권1호
• /
• pp.41-46
• /
• 2006

본 연구는 수도권매립지 주변 건설폐기물 중간처리업체 내에 적재되어 있는 건설발생토의 유해물질 함량과 토양오염도를 측정하여 환경식재기반으로서의 활용 가능성에 대해서 검토하였다. 본 연구에 사용된 건설발생토의 유해물질 함량은 분석항목 모두 지정폐기물에 함유된 유해물질의 기준치 이내로 나타나 환경식재기반으로서의 재활용 가능성이 높은 것으로 나타났다. 토양오염도의 분석에서 토양오염 허용기준을 초과하지 않는 것으로 나타났고, 잔디 생육실험에 있어서도 건설 발생토는 식생토사로서의 활용 가능성이 있는 것으로 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• 제39권5호
• /
• pp.451-458
• /
• 2011

Adhesives derived from renewable resources allow wood panel producers to make lower cost alternatives to formaldehyde-based adhesive resins. Among them, adhesive components extracted from industrial by-products or wastes are the most important research fields in the efficient utilization of waste and cost reduction. In our study, the rapeseed flour, which is a by product from the production of biodiesel extracted from rapeseed, was introduced to develop alternative adhesives for the production of wood flooring. The rapeseed flour was hydrolyzed with 1% sodium hydroxide solution and PF prepolymers were prepared with 3-molar ratios, 1.8, 2.1 and 2.4. The linear fracture mechanics was introduced to evaluate the glue bond quality in wood flooring composed of fancy-veneered and plywood, and the formaldehyde emission and adhesive penetration were also investigated. The formaldehyde emissions of wood flooring met the requirement of the standard of $SE_0$ specified in the KS standard. The rapeseed flour adhesive penetrated sufficiently into the vessel elements and lumens in fancy veneer and plywood and gave strong bond quality to the wood flooring. The fracture mechanics was introduced to evaluate the adhesive joint between fancy veneer and plywood. The critical stress intensity factor ($K_{IC}$) of boliva overlayed wood flooring was increased with increasing molar ratio and this was the same tendency in oak overlayed wood flooring. From the results, the formulated adhesives were efficiently used to bond fancy veneer onto the plywood to make wood flooring and showed a potential to be used as a component of environmentally friendly adhesive resin systems for production of flooring.

• 펄프종이기술
• /
• 제46권3호
• /
• pp.20-27
• /
• 2014

Nowadays, the bleaching techniques of thermomechanical pulp(TMP) are fast developing on the strength of some benefits, mainly on low production cost and good fiber property. In this study, the optimum concentration of bleaching chemicals and the environmental load of bleaching wastes were considered to improve the bleaching efficiency of thermomechanical pulp using Korean redpine(Pinus densiflora) under the peroxide-based bleaching system. The optical property of TMP after bleaching was planned to use higher grade of paper, like printing & writting paper, not general newspaper. The concentration of bleaching chemicals, NaOH, $Na_2SiO_3$ and EDTA, in hydrogen peroxide bleaching system, on the basis of O.D. pulp was closely influenced on the improvement of TMP brightness. Final target of bleaching efficiency was set up to above 76%-ISO brightness. The optimal target brightness of Korean redpine TMP was reached to 76.45%-ISO under the conditions of $H_2O_2$ 7% with NaOH 2.20%, $Na_2SiO_3$ 0.63% and EDTA 0.02%. The concentration of NaOH, $Na_2SiO_3$ and EDTA was correlated functional to the residual peroxide content of wastewater, pH value and electric conductivity of TMP fibers after bleaching treatment. The optimal bleaching conditions by controlling the addition amount of chemicals were positively contributed to the brightness stabilization and environmental load of TMP.

• 한국가구학회지
• /
• 제17권2호
• /
• pp.25-34
• /
• 2006

This experiment was carried out to investigate the high-frequency gluing characteristics of poly vinyl acetate emulsion adhesive(PVAc) on MDF edge-glued boards. The edge-glued boards were glued lengthwise with butt, scarf, or finger joint. The wastes of MDF boards were reused as board materials. The obtained results are summarized as follows; the bending strength of edge-glued MDF increased slightly with the HF heating time, but the economically desirable heating time was 6 minutes. The bending and tensile strength of edge-glued MDF were high with scarf, finger and butt joint, in order. The strength of finger jointed MDF showed 80% of scarf jointed MDF. The effects of location of finger joints on the bending strength of edge-glued MDF were larger than those of the numbers of finger joints. The bending strength of edge-glued MDF with one joint on the middle position showed 40% decrease in comparison with non-jointed MDF.

• 한국조경학회지
• /
• 제28권6호
• /
• pp.114-126
• /
• 2001

The purpose of this study is to establish the databases of pollutant sources and water quality measurement data by utilizing GIS, and making the user interface for the management of pollutant sources. Yeongsan Estuarine Lake was formed of a huge levee of 4.35 km constructed by an agricultural reclamation project. Water quality of the reservoir has been degraded gradually, which mainly attributes to increase of point and non-point source pollutant loads from the lake's watershed of 33,374.3 $\textrm{km}^2$ into it. Application of GIS to establishment of the database was researched of pint source such as domestic sewage, industrial wastewater, farm wastes, and fishery wastes, and non-pont source such as residence, rice and upland field, and forest runoffs of the watershed of the lake. NT Acr/Info and ArcView were mainly utilized for the database formation. Land use of the watershed using LANDSAT image data was analyzed for non-point source pollutant load estimation. Pollutant loads from the watershed into the reservoir were calculated using the GIS database and BOD, TN, TP load units of point and non-point sources. Total BOD, TN, TP loads into it reached approximately to 141, 715, 2,094 and 4,743 kg/day respectively. The loads can be used as input parameters for water quality predicting model of it. A user-friendly interface program was developed using Dialog Designer and Avenue Script of AcrView, which can perform spatial analysis of point and non-point sources, calculate pollutant inputs from the sources, update attribute data of them, delete and add point sources, identify locations and volumes of water treatment facilities, and examine water quality data of water sampling points.

• 펄프종이기술
• /
• 제46권1호
• /
• pp.18-28
• /
• 2014

Renewable Portfolio Standards(RPS) is a regulation that requires a renewable energy generated from eco-friendly energy sources such as biomass, wind, solar, and geothermal. The RPS mechanism generally is an obligatory policy that places on electricity supply companies to produce a designated fraction of their electricity from renewable energies. The domestic companies to supply electricity largely rely on wood pellets in order to implement the RPS in spite of undesirable situation of lack of wood resources in Korea. This means that the electricity supply companies in Korea must explore new biomass as an alternative to wood. Palm kernel shell (PKS) and empty fruit bunch (EFB) as oil palm wastes can be used as raw materials used for making pellets after their thermochemical treatment like torrefaction. Torrefaction is a pretreatment process which serves to improve the properties including heating value and energy densification of these oil palm wastes through a mild pyrolysis at temperature typically ranging between 200 and $300^{\circ}C$ in the absence of oxygen under atmospheric pressure. Torrefaction of oil palms wastes at above $200^{\circ}C$ contributed to the increase of fixed carbon with the decrease of volatile matters, leading to the improvement of their calorific values over 20.9 MJ/kg (=5,000 kcal/kg) up to 25.1 MJ/kg (=6,000 kcal/kg). In particular, EFB sensitively responded to torrefaction because of its physical properties like fiber bundles, compared to PKS and hardwood chips. In conclusion, torrefaction treatment of PKS and EFB can greatly contribute to the implement of RPS of the electricity supply companies in Korea through the increased co-firing biomass with coal.

• 한국버섯학회지
• /
• 제5권1호
• /
• pp.43-49
• /
• 2007

이상의 결과를 종합하면, 평가대상 토양을 증류수로 20배 희석하여 200rpm 으로 30분간 진탕한 후 PDA (감자추출배지)와 혼합하여 $121^{\circ}C$에서 20분간 살균한 후 Coriolus hirsutus (MKACC 50560) 균을 접종한다. 접종완료 후 $25^{\circ}C$에서 5일간 배양한 후 균사 생장을 측정하여 담자균의 균사 생장률 (목적토양에서의 균사생장/PDA 에서의 균사생장${\times}100$)을 계산한다. 이 기준에 따라 균사생장률이 60%이상이 되면 대상 토양은 작물 생육에 적합한 토양이라고 추정할 수 있다. 이러한 방법은 토양의 건전성 평가를 위한 신속한 간이검사를 통하여 소량의 시료를 가지고 단기간 내 대량 분석을 가능하게 하여 토양 건정성 평가의 기초 자료로 사용될 수 있다고 사료된다.

• 공업화학
• /
• 제24권4호
• /
• pp.428-432
• /
• 2013

충북의 산림지역에서는 목재의 가지치기에 의하여 다량의 폐목재가 발생되고 있으나, 이러한 폐목재들은 부산물로서 특정한 처리가 이루어지지 않고 있다. 본 실험에서는 폐목재(참나무, 향나무, 낙엽송, 소나무) 중에서 납 이온의 제거능력이 효과적인 생물흡착제로서 향나무를 도출하였다. 또한, 폐향나무를 사용하여 수중에 함유된 납의 제거 효율을 고찰하였다. 20 mg/L 납 이온의 제거 효율을 증가시키기 위한 최적의 초기 pH가 4임을 알 수 있었으며, 50 mg/L 납이온 제거를 향상을 위한 최적의 생물흡착제 주입농도가 0.6 g/100 mL임을 구하였다. 또한, 100 mg/L 이상의 고농도 납 이온의 흡착 능력을 향상시키기 위해서는 향나무의 황산 처리에 의한 화학적 개질 반응이 필요함을 알 수 있었다. 그리고 6 M 황산으로 개질된 향나무를 이용하여 200, 400, 500 mg/L의 납을 처리하였을 때, 납의 흡착량은 각각 180, 340, 425 mg/g를 나타내었다. 이러한 실험 결과들은 수중에 함유된 납 이온을 효과적으로 처리하는 실질적인 생물흡착제기술로 사용될 수 있을 것이다.

• 펄프종이기술
• /
• 제45권3호
• /
• pp.9-19
• /
• 2013

This research was performed to make functional papers by using the waste of herbal medicine such as Astragalus membranaceus, Angelica acutiloba, and Artemisia capillaris as additives, and to evaluate their physical and optical properties of the manufactured paper. The physical and optical properties were decreased with the increase of the amount of herbal medicine. Of those manufactured papers, the functional paper with Artemisia capillaris showed the dramatic decrease in its physical properties. Adding the herbal medicine waste as additives developed the aesthetic pattern on the surface of the manufactured paper. The paper showing the black pattern on white surface was most favored. Different patterns could be made by changing the size of fibers and the amount of wastes. There was odor emitted from the paper due to the herbal medicine waste, which make the paper to have a potential for the diverse purpose. The herbal medicine waste can be applied to replace weighting agents in the manufacturing process of paper or used for the fuctional additives, resulting in the reduce of the quantity of a pulp consumed. The paper with 10-20% Angelica acutiloba waste were thought to have the most excellent quality on the process point of view.

• 한국식품과학회지
• /
• 제37권3호
• /
• pp.364-371
• /
• 2005

개발된 항균 포장 원지를 이용하여 포장 봉지(packaging bag)와 골판지 포장 상자(corrugated box)를 제작하였고, 여기에 과채류를 포장하였을 때 일반 포장 봉지나 골판지 상자에서 포장된 과채류 보다 변패 미생물의 발생이나 생체중 감소가 상당히 줄어들었다. 이는 BAAG에 의해 과채류의 변패에 관여하는 미생물의 생육을 차단하였고, 제올라이트에 의해 과채류의 조직을 빠르게 연화시키는 기체들인 에틸렌가스, 이산화탄소 및 산소가 제거되었으며, AKD에 의해 과채류가 보유한 수분 손실을 최소한으로 일어나게 하였기 때문이다. 결론적으로 BAAG, 제올라이트, 그리고 AKD로 처리된 포장 원지를 이용하여 제작한 포장대(packaging bag)과 골판지 포장 상자는 저장 과채류의 선도를 유지하는 데 탁월한 효과를 발휘하였고, 기능성 첨가제의 처리로 인한 제조 원가의 상승은 폐기 과채류의 양이 감소하면서 상쇄시킬 수 있었다. 따라서 일반 골판지 상자에 저장된 과채류보다는 기능성 골판지 상자에 저장하는 방법이 보다 경제적인 저장 방법이 될 수 있음을 확인하였다.