• 한국산학기술학회논문지
• /
• 제9권6호
• /
• pp.1511-1517
• /
• 2008

외부에서 인가되는 전류의 세기에 따라 결합력의 세기가 달라지는 자기점성유체의 특성을 이용한 자기점성 유체 댐퍼는 유체의 결합력을 통해 전단력을 발생시켜 진동의 제어가 가능하다. 자기점성유체 댐퍼의 성능을 좌우 하는 코일 작동부의 최적화를 위해 유한요소해석을 이용해 코일 형상에 따른 전자기력의 성능비교를 실시하였다. 또한 고효율 댐퍼를 제작하기 위한 방법으로 다단의 코일 작동부를 가지는 댐퍼를 제안하였으며, 기존의 댐퍼와의 전자기적 성능 비교를 통해 댐퍼의 성능 비교를 수행하고 제한된 조건에서 최대의 효과를 가질 수 있는 방안을 제시하고 그에 따른 전자기장 해석을 수행하였다.

• 한국안전학회지
• /
• 제26권4호
• /
• pp.41-46
• /
• 2011

The purpose of this paper is to analyze the causes of accidents related to the 3 phase 170 kV gas insulated switchgear of a power system collected from accident sites to secure data for the prevention of similar accidents and provide important points of view regarding diagnosis for the prevention of accidents involving gas insulated switchgears. The analysis results of the causes of accidents involving gas insulated switchgears showed deformation of the manipulation lever installed at the S-phase, disconnection of the insulation rod connection, melting of the upper conductor, a damaged tulip, damage to the lower spacer and the spacer at the breaker, etc. It is believed from this result that the potential for accidents has expanded due to accumulated energy as a result of repeated deterioration. The carbonization depth of a GIS was formed near the screw (T2, T3) used to secure the lower pole of the S-phase tulip. It is not known what has caused the screws to be extruded and melted. However, it is thought that an unbalanced electromagnetic force, micro-discharge, surface discharge, etc., have occurred at that point. In addition, even though 16 years have passed since its installation, there was no installation defect, act of arson, accidental fire, etc. General periodical inspection and diagnosis failed to find the factors causing the accidents. As a system contained in a closed metal container, it has a high risk factor. Therefore, it is necessary to design, install and operate a GIS in accordance with the standard operational procedure (SOP). In addition, it is necessary to apply conversion technology for periodical SF6 gas analysis and precision safety diagnosis. It is expected that tracking and managing these changes in characteristics by recording the results on the history card will provide a significant accident prevention effect.

• 한국조경학회지
• /
• 제25권1호
• /
• pp.47-61
• /
• 1997

This study was conducted to grasp the present condition of the name and the related text of the domestic laws (97 statutes, 1 examination, 1 guide, 3 ordinances, 1 leading case) in force which were connected with landscape plant and planting. Examining the general tree-planting system of America, the related foreign laws(1 constitution, 44 statutes, 31 ordinances, 6 leading cases) were arranged in the name and the text and classified by nations of regional groups and it was considered to the mutual relation with lots of laws which are scattered with the various laws. To examine the points at issue of the related domestic laws and to study the related foreign laws, the remedies for the domestic laws being at issue were proposed. That is : A change of the landscape planting concept, the introduction of the landscape planting cost compared with the total construction cost, the unification of the landscape planting ordinances as the unit of city, the clarification of the completion period for the depect of the replaced trees. putting the conservation and production of the top soil under an obligation the adoption of a licence system for the tree planting within the river area, the introduction of the allotment system for landscape architectural expenses, the encouragement of making a hedge, the settlement for the problems of the trees loss compensation, the necessity for the quality test to the landscape planting works, the intensification of the punitive rules to the illegal felling and planting of the trees in the greenzone area, the application of the Labor Standard Act to the landscape planting laborers. The laws relating to landscape plant and planting are prescribed dispersedly in the many other related laws and it is concluded to be impossible for the legislation of the singular law which is applied uniformly to the department of the tree-planting. Hereafter it should be required to analyze concretely in detail the each text of the related laws by means of the joint studies between the professional landscape architects and the lawyers.

• 한국산학기술학회논문지
• /
• 제16권5호
• /
• pp.3542-3547
• /
• 2015

국내의 하수관거 보수공사는 주로 전면굴착과 같은 개착식 공법이 사용되고 있다. 이러한 공법은 도로의 굴착에 따른 시간과 비용의 증가, 교통통제로 인한 민원발생 및 교통지정체 등 많은 문제점을 발생시키고 있다. 이러한 문제점을 해결하기 위하여 본 연구에서는 비굴착공법에 사용 가능한 하수관거 보수자재에 대한 실험을 시행하였다. 사용한 재료는 수지계열의 폴리우레탄수지로 액상형과 경화몰드로 제작한 시편, 그리고 폴리우레탄 수지 CIPP 등이다. 국가표준시험 방법을 적용하여 기본 물성 평가를 시행하였다. 폴리우레탄 수지는 인체에 무해하고, 현장 시공시 악취 등 대기오염물질 발생이 없는 것으로 나타났다. 폴리우레탄 수지의 점도, 가사시간, 겔화시간 등 측정항목 모두 표준 규격을 만족하는 것으로 나타났다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.450-450
• /
• 2006

Organic light-emitting diodes (OLED) as pixels for flat panel displays are being actively pursued because of their relatively simple structure, high brightness, and self-emitting nature [1, 2]. The top-emitting diode structure is preferred because of their geometrical advantage allowing high pixel resolution [3]. To enhance the performance of TOLEDs, it is important to deposit transparent top cathode films, such as transparent conducting oxides (TCOs), which have high transparency as well as low resistance. In this work, we report on investigation of the characteristics of an indium tin oxide (ITO) cathode electrode, which was deposited on organic films by using a radio-frequency magnetron sputtering method, for use in top-emitting organic light emitting diodes (TOLED). The cathode electrode composed of a very thin layer of Mg-Ag and an overlaying ITO film. The Mg-Ag reduces the contact resistivity and plasma damage to the underlying organic layer during the ITO sputtering process. Transfer length method (TLM) patterns were defined by the standard shadow mask for measuring specific contact resistances. The spacing between the TLM pads varied from 30 to $75\;{\mu}m$. The electrical properties of ITO as a function of the deposition and annealing conditions were investigated. The surface roughness as a function of the plasma conditions was determined by Atomic Force Microscopes (AFM).

• Applied Science and Convergence Technology
• /
• 제25권3호
• /
• pp.56-60
• /
• 2016

The ALD process is an adequate technique to meet the requirements that come with the downscaling of semiconductor devices. To obtain thin films of the desired standard, it is essential to understand the thermal decomposition properties of the precursors. As such, this study examined the thermal decomposition properties of TEMAHf precursors and its effect on the formation of $HfO_2$ thin films. FT-IR experiments were performed before deposition in order to analyze the thermal decomposition properties of the precursors. The measurements were taken in the range of $135^{\circ}C-350^{\circ}C$. At temperatures higher than $300^{\circ}C$, there was a rapid decrease in the absorption peaks arising from vibration of $Sp^3$ C-H stretching. This showed that the precursors experienced rapid decomposition at around $275^{\circ}C-300^{\circ}C$. $HfO_2$ thin films were successfully deposited by Atomic Layer Deposition (ALD) at $50^{\circ}C$ intervals between $150^{\circ}C$ to $400^{\circ}C$; the deposited films were characterized using a reflectometer, X-ray photoelectron spectroscopy (XPS), Grazing Incidence X-ray Diffraction (GIXRD), and atomic force microscopy (AFM). The results illustrate the relationship between the thermal decomposition temperature of TEMAHf and properties of thin films.

• 한국임상수의학회지
• /
• 제25권6호
• /
• pp.494-500
• /
• 2008

The aim of this study was to determine the effectiveness of hyaluronic acid-carboxymethylcellulose membrane (GUARDIX-$MB^{(R)}$) barriers on prevention against post-operative peritoneal adhesions. In this study, fourteen mongrel dogs were divided into two experimental groups: 0.1 % hyaluronic acid (0.1HA) group and hyaluronic acidcarboxymethylcellulose membrane (HA-CMC) group. In order to induce adhesions, the anti-mesenteric serosa of the ileum was exteriorized and then abraded in a standard manner by scraping with a scalpel blade to create homogenous petechial hemorrhagic surface over a $1\;{\times}\;1cm$ area. Solution of 0.1HA were simply coated over the abraded tissues, $1.5\;{\times}\;1.5cm$ HA-CMC membrane was placed over the abraded tissues, allowed to spread across the intra-abdominal organs before closure of the abdomen. On day 1 before and day 1, 4, 7, 14, and 21 after operation, venous blood specimens were collected for measurement of fibrinogen and total WBC. The adhesions were blindly assessed 3 weeks later by using a computerized tensiometer. The fibrinogen and total WBC values of two groups showed no statistical significances. The mean tensile strength (gram force, gf) of formed adhesions day 21 after surgery was $88.1\;{\pm}\;55.70gf$ in the 0.1 % HA group and $24.8\;{\pm}\;22.69gf$ in the HA-CMC group. The tensile strength values of adhesion separation HA-CMC membrane group was significantly lower than the 0.1HA group (p<0.05). Therefore, we suggest that HACMC membrane reduce peritoneal adhesions may be applicable to preventing post-operative intraperitoneal adhesions in dogs.

• 대한기계학회논문집A
• /
• 제36권9호
• /
• pp.1081-1086
• /
• 2012

본 논문에서는 품질 검사 방법론이 적용된 계장화 압입시험을 수행하여 점용접부의 경도를 평가하였다. 먼저 정상 및 불량 용접조건하에서 제작된 점용접 샘플에 대해 로크웰 경도 및 계장화 압입시험을 실시하였다. 계장화 압입시험을 통해 구한 압입하중-변위선도를 이용하여 계산된 경도를, 동일한 조건의 동일위치에 대한 압입경도시험을 통하여 측정된 로크웰 경도와 확률론적 방법론을 이용하여 비교평가 하였다. 또한 계장화 압입시험을 통하여 추정한 경도 및 이에 대한 확률론적 해석을 수행하여 점용접부의 신뢰성 기반 품질 관리 기준 설정 가능성을 평가하였다.

• 한국해양공학회지
• /
• 제31권2호
• /
• pp.81-90
• /
• 2017

The 1MW OTEC (Ocean Thermal Energy Conversion) platform was designed for application in equatorial seas. In this study, the OTEC platform was investigated using numerical and experimental methods. An octagon-shaped OTEC platform was investigated using the Ocean Engineering Basin of KRISO. These experiments included various tests of regular waves, irregular waves and irregular waves with current (wave+current). The responses of the platform in regular waves showed good agreement between the numerical and experimental results, including the motion RAO, wave run up, and mean drift force. The peak period of heave and pitch motions were observed around 0.5 rad/s, and the effect of the total reflection was found under short wave conditions. The standard deviation (STD) of the platform motion was checked in irregular waves of equatorial and Hawaiian seas. The STD of the pitch was less than $4^{\circ}$ different from the operability requirement under equatorial conditions and the surge STD of the wave frequency showed good agreement between the numerical and experimental results. The STD values of the surge and pitch were increased 66.6% and 92.8% by the current effects in irregular waves, but the pitch STD was less than $4^{\circ}$ under equatorial conditions. This study showed that the STD of the surge was affected by spring effects. Thus, the watch circle of the platform and tension of the mooring lines must be evaluated for a specific design in the future.

• Smart Structures and Systems
• /
• 제2권2호
• /
• pp.115-126
• /
• 2006

The Terra-Scope system is an affordable 4-D down-hole seismic monitoring system based on independent, microprocessor-controlled sensor Pods. The Pods are nominally 50 mm in diameter, and about 120 mm long. They are expected to cost approximately $6000 each. An internal 16-bit, extremely low power MCU controls all aspects of instrumentation, eight programmable gain amplifiers, and local signal storage. Each Pod measures 3-D acceleration, tilt, azimuth, temperature, and other parametric variables such as pore water pressure and pH. Each Pod communicates over a standard digital bus (RS-485) through a completely web-based GUI interface, and has a power consumption of less than 400 mW. Three-dimensional acceleration is measured by pure digital force-balance MEMS-based accelerometers. These accelerometers have a dynamic range of more than 115 dB and a frequency response from DC to 1000 Hz with a noise floor of less than $30ng_{rms}/{\surd}Hz$. Accelerations above 0.2 g are measured by a second set of MEMS-based accelerometers, giving a full 160 dB dynamic range. This paper describes the system design and the cooperative shared-time scheduler implemented for this project. Restraints accounted for include multiple data streams, integration of multiple free agents, interaction with the asynchronous world, and hardened time stamping of accelerometer data. The prototype of the device is currently undergoing evaluation. The first array will be installed in the spring of 2006.