• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.2
• /
• pp.245-253
• /
• 2003

The degree of conversion of cross-linked polymer has great importance in determining the physical and mechanical properties, and biocompatibility. Therefore, this study examined the comparison of light-cured composite resin polymerization of various light-curing systems composed of plasma arc, halogen, LED curing units and pluse-delay curing with FTIR. From this experiment, The following results were obtained : 1. From FTIR, the degree of conversion(DC) of composite resin was 34.52-49.31%, DC of composite resin used in Flipo was $39.36{\pm}1.22%$, CrediII $45.64{\pm}1.34%$, XL3000 $43.48{\pm}1.34%$, VIP(mode 4) $44.31{\pm}0.72%$, LUXOMAX $49.31{\pm}2.37%$, Elipar Freelight $44.51{\pm}0.62%$ and $34.52{\pm}0.85%$ in pulse-delay curing. 2. The degree of conversion of composite resin in each light-curing unit was highest DC of the LUXOMAX system, lowest DC of the pulse-delay curing. 3. Compared with other curing system, Flipo, LUXOMAX, and pulse-delay curing were significant difference(p<0.05). 4. In same curing method group, the differences of each light-curing unit were no significace in halogen(conventional) curing method(p>0.05), but significance in plasma arc curing and LED curing method(p<0.05).

• 대한공업교육학회지
• /
• v.34 no.1
• /
• pp.19-43
• /
• 2009

An ideology what a modern society seeks is lifelong employment through lifelong learning. The single word which draws the attainment is lifelong vocational competency development. This study is designed for exploring its possibility and limit of a redesign of it, and tries to propose efficiently a redesign idea of a vocational educational path. To this end, it was analyzed by a subject for a national human resource foundation plan and a lifelong bocational competency development foundation plan. In addition to that, it was covered a structure and content analysis of main laws and regulations which are a base of policy making. An educational path could be divided into an area of formal education system, an area of workplace for labors, and an area of lifelong vocational competency development. And the insights were drawn by pulling apart an operational situation of main organizations and a recurrent process of the educational path. The redesign plan of a vocational education path we did analyze to activate lifelong vocational competency development system is deduced as following. Firstly, it should be re-organized with a direction towards an effective manpower training to be linked with skills and demands required by an industry. Secondly, it should be generalized for a model of recurrence between work and learning and its alternation for lifelong vocational competency development. Thirdly, it should create a cluster in the region for lifelong vocational competency development so that it is to form an efficient network to have a division of labor and its liaison with cooperative relationship.

• 대한공업교육학회지
• /
• v.38 no.2
• /
• pp.176-194
• /
• 2013

In this research, 'Construction Technology and Environment' units in 12 different technology home economics textbooks for 1st~3rd year middle school students under the 2009 Revised Educational Curriculum and the content system of textbooks were analyzed based on Reigeluth's elaboration theory, and the following conclusions were derived. First, each of the 12 different textbooks presented the elaboration process by procedural method and composed the content system. Second, the 'Construction Technology and Environment' unit presented many 'Thought Opening' as the systematization strategy of advance learning ability, and 'Unit Summary' presented at the end of the unit as the use strategy of the summarizer was presented preponderantly. In addition, 'Learning Objective' that represents the degree of achievement of the students after learning the unit was presented most as the use strategy of the synthesizer although there are differences in terms. In all of the textbooks, 'Figure,' 'Table,' 'Diagram', and 'Explanation of Terms' were used, and particularly, in the vitalizer strategy of the cognitive strategy, overwhelmingly greater number of 'Figure's, compared with all other elements, were presented as the vitalizer strategy of cognitive strategy. Finally, 'Compensatory Learning,' and 'In-depth Study' were presented as the learner control strategy in each of the 4 different textbooks, and there was one textbook that presents the term 'Supplement Reinforcement' in which compensatory learning and in-depth learning were integrated. Third, the metaphor utilization strategy among the 7 teaching strategies of the elaboration theory was hardly used in the composition items in units of textbooks.

• Journal of Korean Society of Forest Science
• /
• v.104 no.3
• /
• pp.443-453
• /
• 2015

In 1922, Hongneung forest was established to support the study of Korean forestry. Nowadays the forest also plays a role as urban forest which provides a green space for local people. This paper proposes the better management plan of Hongneung forest based on visitor monitoring. On-site surveys with a structured questionnaire were carried out from August to November in 2014 and total 750 data were analyzed. The survey results are as follows: 1) Visitors were inclusive of all age groups and most of them lived nearby Hongneung forest, 2) Visitors used the forest mainly for recreational purposes and recognized the forest as 'Green space' rather than 'experimental forest', 3) Visitors had great satisfaction from the forest visit and raised the necessity of more environment education and promotion of the program. Based on the results, the following solutions have been suggested: 1) Environment education will help visitors to raise awareness on the importance of Hongneung forest which plays a role as both experimental and urban forest, 2) Systematic visitor monitoring can contribute to efficient visitor management and administration of the areas. In conclusion, it is necessary to establish a visitor management system that enable to achieve a harmonization between nature conservation and recreational demands as well as to improve management of natural resource and service.

• Asia pacific journal of information systems
• /
• v.19 no.2
• /
• pp.73-94
• /
• 2009

The general aspects for the future warfare shows that the concept of firepower and maneuver centric warfare has been replacing with that of information and knowledge centric warfare. Thus, some developed countries are now trying to establish the information systems to perform intelligent warfare and innovate defense operations. The C4I(Command, Control, Communication, Computers and Intelligence for the Warrior) systems make it possible to do modern and systematic war operations. The basic idea of this study is to investigate how TAM(Technology Acceptance Model) can explain the acceptance behavior in military organizations. Because TAM is inadequate in explaining the acceptance processes forcomplex technologies and strict organizations, a revised research model based upon TAM was developed in order to assess the usage of the C4I system. The purpose of this study is to investigate factors affecting the usage of C4I in the Korean Army. The research model, based upon TAM, was extended through a belief construct such as self-efficacy as one of mediating variables. The self-efficacy has been used as a mediating variable for technology acceptance, and the variable was included in the research model. The external variables were selected on the basis of previous research. The external variables can be classified into following: 1) technological, 2) organizational, and 3) environmental factors on the basis of TOE(Technology-Organization-Environment) framework. The technological factor includes the information quality and the task-technology fitness. The organizational factor includes the influence of senior colleagues. The environmental factor includes the education/train data. The external variables are considered very important for explaining the behavior patterns of information technology or systems. A structured questionnaire was developed and administrated to those who were using the C4I system. Total 329 data were used for statistical data analyses. A confirmatory factor analysis and structured equation model were used as main statistical methods. Model fitness Indexes for measurement and structured models were verified before all 18 hypotheses were tested. This study shows that the perceived usefulness and the self-efficacy played their roles more than the perceived ease of use did in TAM. In military organizations, the perceived usefulness showed its mediating effects between external variables and dependent variable, but the perceived ease of use did not. These results imply that the perceived usefulness can explain the acceptance processes better than the perceived ease of use in the army. The self-efficacy was also used as one of the three mediating variables, and showed its mediating effects in explaining the acceptance processes. Such results also show that the self-efficacy can be selected as one possible belief construct in TAM. The perceived usefulness was influenced by such factors as senior colleagues, the information quality, and the task-technology fitness. The self-efficacy was affected by education/train and task-technology fitness. The actual usage of C4I was influenced not by the perceived ease of use but by the perceived usefulness and selfefficacy. This study suggests the followings: (1) An extended TAM can be applied to such strict organizations as the army; (2) Three mediation variables are included in the research model and tested at real situations; and (3) Several other implications are discussed.

• The Korean Journal of Nuclear Medicine
• /
• v.3 no.1
• /
• pp.73-82
• /
• 1969

The newly developed diagnostic method with application of $^{113}Sn-^{113m}In$ cow system ($^{113}Sn:\;T\frac{1}{2}$ 118 days, $^{113m}In:\;T\frac{1}{2}$ 1.7 hrs, 390 Kev, Single ${\gamma}$) has the remarkable advantages such as increased diagnostic ability by single large dose administration of $^{113m}In$ with no subsequent radiation hazard and shortened examining time. We reformed the research of following scope with the use of developed $^{113}Sn-^{113m}In$ cow (25 mCi) generator: The sizes of particles produced under various conditions were investigated, and possibility for application to the scannings of various organs such as brain, liver, lung, bone marrow and blood pool etc. were studied. Results: $^{113m}InCl_3$ solution eluted from diluted HCl solution (pH 1.5) passed through $^{113}Sn-^{113m}In$ generator, and there can be produced various sized particles of colloidal indium. And there observed the state of distribution of $^{113m}In$ in each organ which showed many differences according to the particle sizes of colloidal indium. The results are stated as follows: 1. The adjustment of pH is the most important factor in making the desirable particle size of colloidal indium. The colloid for blood pool showed the highest level as 7.1%/gm blood, at pH 1.7, the colloid of pH 3.5 for liver scanning showed the highest level, 88.4%, in the liver, the colloid pH 6 showed the highest level, 3.1%, in the spleen, and the colloid of pH 11.0 showed the highest level, 85.3%/gm, in the lung. 2. The colloid for liver scanning made with NaCl-NaOH system showed the highest liver uptake at pH 7.2, and at either higher or lower pH than 7.2 showed decrease of liver uptake more or less. 3. The activity of $^{113m}In$ eluted through $^{113}Sn-^{113m}In$ generator indicated over 90% in the initial 4 ml, and particularly 88.1%-86.0% in the initial 2 ml. 4. The incubation time, tempertaure and mechanical irritation related to colloid formation and coating of colloid were not the definite condition of influence.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.2
• /
• pp.249-270
• /
• 1993

For understanding of anatomy, physiology, and diseases of human TMJ, it is required to evaluate quantitatively the movement of the disc and condyle head of mandible. The histologic section of cadaver TMJ were examined, and the magnification of the MR image and its details of anatomy were evaluated. And then a quantitative analytic method, by comparing the Sectograph and the MR image of vital human TMJ, was proposed. For this study, 15 subjects(Male, 24~35years) were selected from a prosthodontic examination randomly, and each subject’s five interocclusal rubber registration records were made on the ICP, and 5, 10, 15, and 20mmjaw opening positions. All subjects were radiographed with a Denar Quint Sectograph Image System(Denar Corp., USA), and imaged with a MRP-20EX MR Image System(0.2T, Permanent Magnet Type, Hitachi Medical Corp., Japan) using an 100mm diameter bilateral type surface coil. These images were traced on the acetate tracing paper, and analyzed In this study, the findings led to the following conclusions. 1. In comparison of the histologic section of autopsy specimen with the MR image at the same section, the size(dimension) of MR image was 70% of the real one. It was possible to recognize the shape of articular disc, anterior and posterior attachments, and adjacent soft tissues, because of the excellent reproducibility of anatomical structure. 2. When we compared the amount of joint space on MR image with that of joint space on sectograph, the amount of joint space on sectograph was significantly greater than that of joint space on MR image, except at the top of condylar head. 3. The position of minimum joint space on sectograph at intercuspal position didn't coincide with the middle position of articular disc on MR image, and was approximately in the anterior third of posterior band of articular disc. 4. The amount of condylar movement on MR image at opening movement was greater than that of articular disc movement. From Intercuspal position to 5mm jaw-opening movement, the condylar movement showed hinge one, and over the range 5mm jaw-opening it suggested hinge & translatory one. 5. In terms of area variation of articular disc measured on MR image in sagittal plane, the area of posterior band increased with increasing the amount of Jaw opening, but the area of anterior band decreased conversely.

• Journal of Korea Multimedia Society
• /
• v.13 no.3
• /
• pp.438-456
• /
• 2010

Iris recognition uses a unique iris pattern of user to identify person. In order to enhance the performance of iris recognition, it is reported that the diameter of iris region should be greater than 200 pixels in the captured iris image. So, the previous iris system used zoom lens camera, which can increase the size and cost of system. To overcome these problems, we propose a new method of enhancing the accuracy of iris recognition on low-resolution iris images which are captured without a zoom lens. This research is novel in the following two ways compared to previous works. First, this research is the first one to analyze the performance degradation of iris recognition according to the decrease of the image resolution by excluding other factors such as image blurring and the occlusion of eyelid and eyelash. Second, in order to restore a high-resolution iris image from single low-resolution one, we propose a new method based on multiple multi-layered perceptrons (MLPs) which are trained according to the edge direction of iris patterns. From that, the accuracy of iris recognition with the restored images was much enhanced. Experimental results showed that when the iris images down-sampled by 6% compared to the original image were restored into the high resolution ones by using the proposed method, the EER of iris recognition was reduced as much as 0.133% (1.485% - 1.352%) in comparison with that by using bi-linear interpolation

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.237.1-237.1
• /
• 2014

Etching is one of the most important steps in semiconductor manufacturing. In etch process control a critical task is to stop the etch process when the layer to be etched has been removed. If the etch process is allowed to continue beyond this time, the material gets over-etched and the lower layer is partially removed. On the other hand if the etch process is stopped too early, part of the layer to be etched still remains, called under-etched. Endpoint detection (EPD) is used to detect the most accurate time to stop the etch process in order to avoid over or under etch. The goal of this research is to develop a hardware and software system for EPD. The hardware consists of an Optical Plasma Monitor (OPM) sensor which is used to continuously monitor the plasma optical emission intensity during the etch process. The OPM software was developed to acquire and analyze the data to perform EPD. Our EPD algorithm is based on the following theory. As the etch process starts the plasma generated in the vacuum is added with the by-products from the etch reactions on the layer being etched. As the endpoint reaches and the layer gets completely removed the plasma constituents change gradually changing the optical intensity of the plasma. Although the change in optical intensity is not apparent, the difference in the plasma constituents when the endpoint has reached leaves a unique signature in the data gathered. Though not detectable in time domain, this signature could be obscured in the frequency spectrum of the data. By filtering and analysis of the changes in the frequency spectrum before and after the endpoint we could extract this signature. In order to do that, first, the EPD algorithm converts the time series signal into frequency domain. Next the noise in the frequency spectrum is removed to look for the useful frequency constituents of the data. Once these useful frequencies have been selected, they are monitored continuously in time and using a sub-algorithm the endpoint is detected when significant changes are observed in those signals. The experiment consisted of three kinds of etch processes; ashing, SiO2 on Si etch and metal on Si etch to develop and evaluate the EPD system.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.12
• /
• pp.894-906
• /
• 2006

There are many difficulties to develop a mobile contents due to many constraints on mobile environments. It is difficult to make a good mobile contents with only visual reduction of existing contents on wire Internet. Therefore, it is essential to devise the data representation and to develop the authoring tool to meet the needs of the mobile contents market. We suggest the compact mobile contents to learn Chinese characters and developed its authoring tool. The animation which our system produces is realistic as if someone writes letters with pen or brush. Moreover, our authoring tool makes a user generate a Chinese character animation easily and rapidly although she or he has not many knowledge in computer graphics, mobile programming or Chinese characters. The method to generate the stroke animation is following: We take basic character shape information represented with several contours from TTF(TrueType Font) and get the information for the stroke segmentation and stroke ordering from simple user input. And then, we decompose whole character shape into some strokes by using polygonal approximation technique. Next, the stroke animation for each stroke is automatically generated by the scan line algorithm ordered by the stroke direction. Finally, the ordered scan lines are compressed into some integers by reducing coordinate redundancy As a result, the stroke animation of our system is even smaller than GIF animation. Our method can be extended to rendering and animation of Hangul or general 2D shape based on vector graphics. We have the plan to find the method to automate the stroke segmentation and ordering without user input.