• 경영과학
• /
• 제27권3호
• /
• pp.71-86
• /
• 2010

The purpose of this research is to identify the factors of self-determination theory (e.g., autonomy, competence, and relatedness) affecting flow, satisfaction, and loyalty. This research uses structural equation modeling (SEM) to confirm the validity and analyzes the causal relationship of the suggested model. The results indicate that competence and relatedness positively influence flow and that autonomy positively influences satisfaction. First, autonomy is significantly shown to influences satisfaction and does not significantly influence flow. Second, that competence significantly influenced flow and indirectly influenced satisfaction. Third, relatedness significantly influenced flow and indirectly influenced satisfaction. Finally, flow influenced satisfaction, and flow and satisfaction directly and indirectly influenced loyalty.

• ETRI Journal
• /
• 제30권2호
• /
• pp.238-248
• /
• 2008

At the extremes of the complexity-performance plane, there are two exemplary QoS management architectures: Integrated Services (IntServ) and Differentiated Services (DiffServ). IntServ performs ideally but is not scalable. DiffServ is simple enough to be adopted in today' core networks, but without any performance guarantee. Many compromise solutions have been proposed. These schemes, called quasi-stateful IntServ or stateful DiffServ, however, have not attracted much attention due to their inherently compromising natures. Two disruptive flow-based architectures have been recently introduced: the flow-aware network (FAN) and the flow-state-aware network (FSA). FAN's control is implicit without any signaling. FSA's control is even more sophisticated than that of IntServ. In this paper, we survey established QoS architectures, review disruptive architectures, discuss their rationales, and points out their disadvantages. A new QoS management architecture, flow-aggregate-based services (FAbS), is then proposed. The FAbS architecture has two novel building blocks: inter-domain flow aggregation and endpoint implicit admission control.

• 한국경영과학회지
• /
• 제41권1호
• /
• pp.87-98
• /
• 2016

A single machine scheduling problem for jobs with stochastic processing time is considered in this study. Shortest processing time (SPT) sequencing according to the expected processing times of jobs is optimal for schedules with minimal expected mean flow time when all the jobs arrive to be scheduled and their expected processing times are known. However, SPT sequencing according to the expected processing time may not be optimal for the minimization of the mean flow time when the actual processing times of jobs are known. This study evaluates the complexity of SPT sequencing through a comparison of the mean flow times of schedules based on the expected processing times and actual processing times of randomly generated jobs. Evaluation results show that SPT sequencing according to the expected flow time exhibits chaotic variation to the optimal mean flow time. The relative deviation from the optimal mean flow time increases as the number of jobs, processing time, or coefficient of variation increases.

• 한국화재소방학회논문지
• /
• 제32권4호
• /
• pp.69-74
• /
• 2018

본 연구에서는 기존 제연설비의 문제점 개선 및 제연설비의 성능극대화를 위해 제연구역의 압력변화에 따라 풍량제어가 가능한 배출댐퍼를 개발하였으며, 개발 댐퍼의 효용성 검증과 상용화를 위해 성능시험을 실시하였다. 시험결과로부터 개발 배출댐퍼에 의해 급기량이 약 1 ~ 5% 정도 더 증가되는 것으로 나타났고, 제연구역에는 송풍기의 설계풍량 이상의 안정적인 풍량이 공급됨으로 풍량제어 배출댐퍼의 효용성이 입증되었다. 풍량제어 배출댐퍼의 원천기술을 확보하였다.

• Journal of Construction Engineering and Project Management
• /
• 제3권1호
• /
• pp.1-9
• /
• 2013

Construction is a competitive industry and successful contractors must be able to win bids to obtain projects. Cash flow analysis not only determines actual profit at the end of the project, but also estimates required cash resources or cash ballances at the end of every month. Cash flow analysis is important in managing a construction project; however, it requires extensive information that is not immediately available to the general contractor. Before contractors can perform cash flow analysis, they must first complete a series of pre-requisites such as the quantity take off, scheduling, and cost estimating, followed by accurate assessments of project costs incurred and billable progress made. Consequently, cash flow analysis is currently a lengthy, uncertain process. This paper suggests improved cash flow analysis can be developed using data extraction in Building Information Modeling (BIM). BIM models contain a wealth of information and tools have been developed to automate a series of process such as quantity takeoff, scheduling, and estimating. This paper describes a prototype tool to support BIM-based, automated cash flow analysis.

• 한국환경과학회지
• /
• 제26권8호
• /
• pp.939-953
• /
• 2017

For the development of flow duration curves for the management of 41 Total Maximum Daily Load (TMDL) units of the Nakdong River basin, first, an equation for estimating daily flow rates as well as the level of correlation (correlation and determination coefficients) was extrapolated through regression analysis of discrete (Ministry of Environment) and continuous (Ministry of Land, Infrastructure and Transportation) measurement data. The equation derived from the analysis was used to estimate daily flow rates in order to develop flow duration curves for each TMDL unit. By using the equation, the annual flow duration curves and flow curves, for the entire period and for each TMDL unit of the basin, were developed to be demonstrated in this research. Standard flow rates (abundant-, ordinary-, low- and drought flows) for major flow duration periods were calculated based on the annual flow duration curves. Then, the flow rates, based on percentile ranks of exceedance probabilities (5, 25, 50, 75, and 95%), were calculated according to the flow duration curves for the entire period and are suggested in this research. These results can be used for feasibility assessment of the set values of primary and secondary standard flow rates for each river system, which are derived from complicated models. In addition, they will also be useful for the process of implementing TMDL management, including evaluation of the target level of water purity based on load duration curves.

• 한국콘텐츠학회논문지
• /
• 제22권5호
• /
• pp.643-655
• /
• 2022

본 연구의 목적은 청소년들의 시간관리능력이 대면 및 비대면 학습몰입에 미치는 영향에서 부모 학습관여의 조절효과를 검증하는 것이다. 연구 대상자는 중·고등학교 청소년 363명이었고, 온라인 설문조사를 통해 자료를 수집하였다. 주요 통계 분석 방법은 분산분석, 상관관계분석 및 회귀분석이었다. 연구결과, 첫째, 비대면 수업보다 대면 수업에서 학습몰입이 유의하게 높았다. 둘째, 시간관리능력, 부모 학습관여 및 학습몰입 간에 유의한 정적 상관관계가 있었다. 셋째, 시간관리능력이 대면 학습몰입에 미치는 영향에서 부모 학습관여의 조절효과는 유의하였다. 넷째, 시간관리능력이 비대면 학습몰입에 미치는 영향에서 부모 학습관여의 조절효과는 유의하였다. 즉, 부모의 긍정적 학습관여가 높아질수록 청소년들의 시간관리능력이 학습몰입에 미치는 영향을 더욱 강하게 하였다. 마지막으로 청소년들의 학습몰입의 증진을 위한 부모의 긍정적 관여의 중요성과 시간관리능력 증진 방법을 논의하였다.

• 한국물환경학회지
• /
• 제28권4호
• /
• pp.574-581
• /
• 2012

It is important to analyze the status of water quality with relation to the stream flow to attain water quality goal more effectively in the unit watersheds for the management of Total Maximum Daily Loads (TMDLs). This study developed a flow duration-water quality distribution graph to figure out water quality appearances on the flow variation and analyzed contributions of water quality observations to the impaired water bodies quantitatively by hydrologic conditions. Factors relating to water quality variation can be analyzed more precisely and assessed on the base of quantified contributions. It is considered that this approach could be utilized to establish a more effective plan for the water quality improvement including the prioritization of pollution reduction options.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2009년도 춘계학술발표논문집
• /
• pp.319-324
• /
• 2009

Lately, knowledge-based society comes, it is important for enterprises to creatively utilize knowledge of technology for technological innovation. So, Technological innovation capacity of enterprises is important factor of business success. To improve technological innovation capacity, enterprises should well utilize their internal knowledges and external knowledges which come from technological diffusion. To well utilize external knowledges of enterprises they should well understand external knowledge flow. Especially knowledge flow also occurs frequently between nations, understanding of knowledge flow which occurs between nations is important to improve nation`s technological innovation capacity. So this paper presents comparison of technological innovation capacity and knowledge diffusion flow between nations.

• 국제학술발표논문집
• /
• The 4th International Conference on Construction Engineering and Project Management Organized by the University of New South Wales
• /
• pp.556-560
• /
• 2011

Players of construction projects proceed with each work process by information gathering, modification and communication. Due to the complex and long-span lifecycle projects increased, it became more important to grasp this mechanism for the successful project performance in construction project. Hence, most project information management systems or knowledge management systems equip information retrieval system. There are two logic to infer the meaning of retrieval target; inductive reasoning and deductive reasoning. The former is based on metadata explaining the target and the later is based on relation between data. To infer the information flow, it is necessary to define the correlation between players and work processes. However, most established information retrieval systems are based on index search system and it is not focused on correlation between data but data itself. Thus, this research aims to research on process of information flow retrieval system for large-scale construction projects.