• 한국시뮬레이션학회논문지
• /
• 제10권1호
• /
• pp.25-34
• /
• 2001

In this paper, we describe the generation method of interface logic which replace between IP & IP handshaking signal with asynchronous logic circuit. Especially, we suggest the new asynchronous sequential "Waveform to VHDL" code creation algorithm by flow chart conversion : Wave2VHDL - if only mixed asynchronous timing waveform is presented the level type input and pulse type input for handshaking, we convert waveform to flowchart and then replace with VHDL code according to converted flowchart. Also, we confirmed that asynchronous electronic circuits are created by applying extracted VHDL source code from suggest algorithm to conventional domestic/abroad CAD Tool, Finally, we assured the simulation result and the suggest timing diagram are identical.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2017년도 제56차 하계학술대회논문집 25권2호
• /
• pp.209-210
• /
• 2017

본 연구에서는 초등에서 알고리즘 교육의 방법으로 사용되는 언플러그드 활동에 순서도를 활용하는 방안을 제안한다. 소프트웨어 교육의 기본적인 방향은 컴퓨팅 사고력을 기반으로 문제를 해결하는 역량을 기르고자 하는 것[1]이지만, 현재는 교육용 프로그래밍 언어의 학습에 치우쳐 있거나 알고리즘 교육이 제대로 이루어지고 있지 않다. 언플러그드 활동에 순서도를 활용함으로써 알고리즘 영역의 교육을 강화하고 균형 잡힌 컴퓨팅 사고력 함양에 도움이 될 것이다.

• Journal of Electrical Engineering and Technology
• /
• 제11권4호
• /
• pp.915-920
• /
• 2016

A power system designer may have difficulties in choosing a suitable multiple-input converter topology for a specific target application because each multiple-input converter topology presented in the literature has its own advantages and disadvantages. In this perspective, this paper presents a systematic topology selection method for multiple-input converters with three comparison criteria including cost-saving effect, modularity potential and flexibility. Based on these criteria, this paper proposes a strategic flow chart example for choosing a proper multiple-input converter topology. This flow chart will provide a powerful selection tool to a power system designer when he or she chooses a specific multiple-input converter for a given application.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권5호
• /
• pp.2163-2170
• /
• 2012

Aim: This one group semi-experimental study was performed to develop and adapt flow charts of nursing practices applied to gynecologic oncology patients to the field. Methods: The research was conducted between October 2008 and March 2009 in 6 hospitals in Istanbul (3 health ministry hospitals, 2 private hospitals and 1 university hospital) with effective programs. The scope of the study included 97 midwives/nurses who had been working as caregivers of gynecologic oncology patients in this unit at least for 6 months and who participated in this study voluntarily; 87 people composed the sample because of the absence of others on vacation or sick leave when the data were collected or who did not wish to participate. The data were in descriptive information form collected via "Forms to Determine the Efficiency of Flow Charts". Before data collection, risks related to gynecologic oncology problems were identified, a literature scanning was made for existing flow charts based on actual practices and the discovered charts were reviewed. As a result of the evaluations, it was decided to create 15 flow charts intended for risks, symptoms, operation processes and discharge. Questionnaires to determine activity were applied to participants before and after practice. Results: As a result of the study, it was determined that the efficiency of the flow charts increased significantly (p <0.01) after practice of the participants, nosignificant relationships (p>0.01) being apparent with age group, education level, occupational period in the job and in the gynecologic oncology field and evaluations of the practice before and after it was applied. Conclusion: The results of the study revealed that nursing participants in university and private hospitals and who supported the existence of a flow chart in the field evaluated the flow charts positively.

• 한국안전학회지
• /
• 제35권6호
• /
• pp.32-45
• /
• 2020

The problem of determining the discharge rates of gases from pressurized vessels through pressure relief devices was dealt with comprehensively. First, starting from basic fluid flow equations, detailed modeling procedures were presented for isentropic nozzle flows and frictional flows in a pipe, respectively. Meanwhile, physical explanations were given to choking phenomena in terms of the acoustic velocity, elucidating the widespread use of Mach numbers in gas flow models. Frictional flows in a pipe were classified into adiabatic, isothermal, and general flows according to the heat transfer situation around the pipe, but the adiabatic flow model was recommended suitable for gas discharge through pressure relief devices. Next, for the isentropic nozzle flow followed by adiabatic frictional flow in the pipe, two equations were established for two unknowns that consist of the Mach numbers at the inlet and outlet of the pipe, respectively. The relationship among the ratio of downstream reservoir pressure to upstream pressure, mass flux, and total frictional loss coefficient was shown in various forms of MATLAB 2-D plot, 3-D surface plot and contour plot. Then, the profiles of gas properties and velocity in the pipe section were traced. A method to quantify the relationship among the pressure head, velocity head, and total friction loss was presented, and was used in inferring that the rapid increase in gas velocity in the region approaching the choked flow at the pipe outlet is attributed to the conversion of internal energy to kinetic energy. Finally, the Levenspiel chart reproduced in this work was compared with the Lapple chart used in API 521 Standatd.

• 대한조선학회지
• /
• 제19권2호
• /
• pp.41-60
• /
• 1982

The main idea of this report, which deals with the process analysis in outfitting fields, is to improve working methods and further to secure higher productivity by removing unreasonable work factors in the workshop with the economical point of view. For this purpose, a series of techniques has been applied to some parts of chronically less productive outfitting works, expecting less man hour consumption and better working conditions to go with it. That is to make full use of process chart flow diagram(man & machine chart gang process chart). The text gives brief introductions of the charts respectively and the appendix shows actual practice directly applicable for the guidance of utilizing these charts. As the result of this, some of unreasonable work factors are removed from the total cycle and finally standard working method & time can be come out by reasonable working time and gradually improved working method.

• 한국공간구조학회지
• /
• 제7권3호
• /
• pp.20-27
• /
• 2007

• 한국터널지하공간학회 논문집
• /
• 제10권4호
• /
• pp.383-395
• /
• 2008

연약지반개량 기술 중의 하나인 그라우팅이 차수 보강 목적으로 다양한 건설공사에서 널리 활용되고 있지만 그라우팅공법이 지반내부에서 시행되는 기술적 특성상 그 시공과정의 적합성 및 시공 후 효과확인 방법에 대한 문제점이 많다. 본 연구 대상의 그라우팅 p-q-t chart는 주입속도(q)와 주입압(p)의 경시변화(t)에 대한 관계를 나타내는 지표로서 그라우팅 시공과정을 모니터링하여 시공인자의 적합성을 평가하여 조정할 수 있는 유일한 수단이다. 본 연구에서는 시험 및 시공과정을 일괄적으로 관리할 수 있는 자동 주입관리 시스템(AGS; automatic grouting system)를 이용하여 정밀한 p-q-t chart를 검출할 수 있었으며, 검출된 p-q-t chart의 유형을 표준유형과 비교분석을 통해서 대상지반의 주입특성에 대한 정보를 추정할 수 있었다. 향후 본 연구에서 적용한 자동 주입관리 시스템을 이용하여 도출된 p-q-t chart를 활용한다면 주입재료, 주입공법, 주입속도 및 주입압 등 시공인자의 적합성을 판정하고 조정하는 객관적 지표로 활용하여 그라우팅 시공의 신뢰성을 획기적으로 향상시킬 수 있을 것으로 기대된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권5호
• /
• pp.47-54
• /
• 2008

본 연구에서는 수중발파로 인해 발생되는 지반의 진동과 수중소음, 진동의 감쇠정도를 계측 및 분석하였다. 실험과 신뢰성이론으로 부터 진동추정식을 $V=K(SD)^{-0.536}$으로 제시하였으며, 발파상수 K값은 신뢰도 50%, 90%, 99.9%에 따라 1.507, 2.005, 2.939로 각각 얻어졌다. 수중발파로 인한 육상의 소규모 저수지(양식어장)의 수중소음추정식은 실측된 수중소음 자료를 이용하여 $SL=293.2SD^{-0.164}$로 제시하였으며, 수중에서는 최대 86.8dB(A), 대기중에서는 최대 147.8dB(A)의 소음이 계측되었다. 이러한 연구결과들을 고려하여 수중발파 설계 및 영향성 평가가 가능한 흐름도를 제시하였다. 수중발파에 대한 영향평가 연구는 이제 시작하는 단계로써 지속적이고 다양한 경우에 대한 연구가 보완되어야 할 것으로 판단된다.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2001년도 The Pacific Aisan Confrence On Intelligent Systems 2001
• /
• pp.211-218
• /
• 2001

This paper introduces a method of constructing expert systems in an integrated environment for automatic software design. This integrated environment may be applicable from top-level system architecture design, data flow diagram design down to flow chart and coding. The system is integrated with three CASE tools, FSD (Functional Structure Diagram), DFD (Data Flow Diagram) and structured chart PAD (Problem Analysis Diagram), and respective expert systems with automatic design capability by reusing past design. The construction way of these expert systems is based on systematic acquisition of design knowledge stemmed from a systematic design work process of well-matured developers. The design knowledge is automatically acquired from respective documents and stored in the respective knowledge bases. By reusing it, a similar software system may be designed automatically. In order to develop these expert systems in a short period, these design knowledge is expressed by the unified frame structure, functions of th expert system units are partitioned mono-functions and then standardized components. As a result, the design cost of an expert system can be reduced to standard work procedures. Another feature of this paper is to introduce the integrated environment for automatic software design. This system features an essentially zero start-up cost for automatic design resulting in substantial saving of design man-hours in the resulting in substantial saving of design man-hours in the design life cycle, and the expected increase in software productivity after enough design experiences are accumulated.