• 제목/요약/키워드: flight control system)

검색결과 882건 처리시간 0.023초

비행자료 처리시스템 분석 (The Analysis of Flight Data Processing System)

  • 김도우;오승희;이덕규;이성현;한종욱
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2009년도 춘계학술대회
    • /
    • pp.785-788
    • /
    • 2009
  • 비행자료 처리시스템은 항공기 관제를 위한 모든 비행관련 자료를 처리하고 관리하며 항적 모델링을 하기 위한 시스템으로 항공관제용 통합 정보처리 시스템의 핵심 기능을 수행하는 역할을 담당한다. 항공기의 안전한 운항을 위해서는 비행자료 처리를 통해 항공교통관제기관간의 정보전달과 교환은 필수적인 요소이다. 따라서 본 논문에서는 비행자료 처리시스템의 개발을 위해 기능을 분석하고, 설계 시 필요한 고려사항을 살펴보고자 한다.

  • PDF

비선형 시스템식별에 의한 무인비행기의 수학적 모델 적합성 (Validation of Mathematical Models of UAV by Using the Parameter Estimation for Nonlinear System)

  • 이환;최형식;성기정
    • 제어로봇시스템학회논문지
    • /
    • 제13권10호
    • /
    • pp.927-932
    • /
    • 2007
  • The sophisticated mathematical model is required for the design and the database construction of the advanced flight control system of UAV. In this paper, flight test of KARI's research UAV, often called DURUMI-II, is implemented for the data acquisition from the maneuver flight. The flight path reconstruction is implemented to ensure that the measured data is consistent and error free. The nonlinear system identification for the refined mathematical modeling is implemented with the verified measurements from the flight path reconstruction. The simulation with the identified results have a good validation when the simulated responses were compared to the flight tested data.

유무인 겸용 비행체의 자동비행조종시스템 개발 (Automatic Flight Control System Development for Optionally Piloted Vehicle)

  • 이상종;최형식;성기정
    • 한국항공우주학회지
    • /
    • 제42권11호
    • /
    • pp.968-973
    • /
    • 2014
  • 유무인 겸용 비행체인 OPV는 무인기 개발방법 중의 하나로 기존 유인기 운용을 통해 검증된 유인 비행체와 엔진 및 각 계통을 유지하며, 무인기 운용을 위해 필요한 부가 시스템을 장착하고, 필요에 따라 기존시스템을 수정하여 개발비용과 시간을 줄일 수 있는 장점을 가지고 있다. 또한 임무 및 비행조건에 따라 유인기와 무인기로 겸용하여 운용할 수 있는 장점을 가지고 있으며, 퇴역하는 유인기를 재활용하는 측면에서도 국가의 중요재원을 효율적으로 활용할 수 있는 시스템이다. 본 논문에서는 국내 최초로 개발한 고정익 OPV 비행체의 자동비행조종시스템을 중심으로 초기 중요 개발개념과 기술적 고려사항 들을 정리하였다.

TCP/IP를 이용한 하드웨어 전환장치 설계에 관한 연구 (A Study on the Design of Hardware Switching Mechanism using TCP/IP Communication)

  • 김종섭;조인제;임상수;안종민;강임주
    • 제어로봇시스템학회논문지
    • /
    • 제13권7호
    • /
    • pp.694-702
    • /
    • 2007
  • The SSWM(Software Switching Mechanism) of I-processor concept using non-real time in-house software simulation program is an effective method in order to develop the flight control law in desktop or HQS environment. And, this system has some advantages compare to HSWM(Hardware Switching Mechanism) such as remove the time delay effectiveness and reduce the costs of development. But, if this system loading to the OFP(Operational Flight Program), the OFP guarantee the enough throughput in order to calculate the two control law at once. Therefore, the HSWM(Hardware Switching Mechanism) of 2-processor concept is necessary. This paper addresses the concept of HSWM of the HQS-PC interface using TCP/IP(Transmission Control Protocol/Internet Protocol) communication based on flight control law of advanced supersonic trainer. And, the fader logic of TFS(Transient Free Switch) and stand-by mode of reset '0' type are designed in order to reduce the abrupt transient response and minimize the integrator effect in pitch axis. The result of the analysis based on HQS pilot simulation using HSWM reveals that the flight control systems are switching between two computers without any problem.

가변스팬 모핑날개를 가진 비행체의 공력특성 및 비행 제어 (Aerodynamics and Flight Control of Air Vehicle with Variable Span Morphing Wing)

  • 배재성;황재혁;박상혁;김종혁
    • 한국항공운항학회지
    • /
    • 제18권4호
    • /
    • pp.1-8
    • /
    • 2010
  • In the aerospace field, the study on a morphing-wing is in progress to improve flight performance and perform multi flight mission. There are many concepts of morphing-wing such as camber-change, wing-twist, variable-span, and so on. In this study, the aerodynamic characteristics and flight control of an air vehicle with a variable-span morphing wing (VSMW) have been investigated. VSMW with symmetric span control(SSC) can increase cruising range of aircraft by reducing drag in various flight condition. VSMW with anti-symmetric span control(ASSC) can be used in the roll control of an aircraft. The flight control about pure rolling dynamic system and full dynamic system have been performed about the cruise missile.

Recent trends in advanced flight control

  • Kanai, Kimio
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
    • /
    • pp.24.1-24
    • /
    • 1996
  • The development of future aircraft that involves the expanded flight envelop will place increased performance requirements on the design of the flight control system. Maneuvering areas are expanding into flight envelopes characterized by significantly larger levels of modeling uncertainty than encountered in present flight control designs. Conventional flight control techniques that ignore the effects of large parameter variations, modeling uncertainties and nonlinearities, will likely produce designs with poor performance and robustness. Recent advances in modern control theories called advanced control theories, most notably the H$\_$.inf./ synthesis technique, adaptive control and neural network application, offer the promise of a design technique that can produce both high performance and robust controllers for next generation aircraft. This special lecture will survey the recent development in advanced flight control and review the possible application of advanced control theories.

  • PDF

제어법칙 간 상호 전환 시 과도응답 최소화를 위한 전환시간에 관한 연구 (A Study on the Conversion Time to Minimize of Transient Response during Inter-Conversion between Control Laws)

  • 김종섭
    • 항공우주시스템공학회지
    • /
    • 제9권1호
    • /
    • pp.12-18
    • /
    • 2015
  • The inter-conversion between different control laws in flight has a lot of risk. The SWM(Switching Mechanism) including logic and stand-by mode is designed to analyze the transient response of aircraft during inter-conversion between different control laws, based on the in-house software for non-real-time and real-time simulation. The SWM applies the fader logic of TFS(Transient Free Switch) to minimize the transient response of an aircraft during the inter-conversion, and applies the reset '0' type of the stand-by mode to prevent surface saturation due to integrator effect in the disengaged flight control law. The transition time is also important to minimize the objectionable transient response in the inter-conversion, as well as the transition control law design. This paper addresses the results of non-real-time simulation for the characteristics of transient response to different transition time to select the adequate transient time, and the real-time pilot evaluation, using SSWM(Software Switching Mechanism) and HSWM(Hardware Switching Mechanism), which is met for Level 1 flying qualities and assures safety of flight.

원격조종항공기 드론 조종기모드 표준화 연구 : 드론 조종기모드 선호도를 중심으로 (A Study on Standardization on the Flight Controller Mode in Remotely Piloted Aircraft Drone : Focused on Drone Controller Mode Preference)

  • 박원태
    • 산업경영시스템학회지
    • /
    • 제42권4호
    • /
    • pp.69-75
    • /
    • 2019
  • Remotely Piloted Aircraft (RPA) controls as a type of unmanned aerial vehicle (drone) is growing rapidly and its flight controller stick disposition is required standardization. We should standardize RPA drone flight control disposition because the flight pilot of RPA is hard to be trained so the flight controller stick differences impairs safety and wastes time and effort of flight controller industry. So this study researches the on-going standardization of RPA drone flight control disposition in Korea and foreign countries. Also this paper analyzes and researches of expert about RPA drone flight controller function and application of flight control mode. I accomplished expert research about standardization plan of unmanned flight control mode and confirm the necessity. Nowadays mode1 and 2 are mostly used in Korea so I carried out preference investigation for two modes. There were 4 preferences choices of RPA drone control mode necessity (importance) and recommendation of standardization modes. They answered that necessity of standardization is important considering pilot training, flight safety and positive development of drone industry. The result of standardization mode preference is that they prefer mode 2 (drone maker 86%, training facilities and research facilities 58%, government bureau 60%). Overall preference result shows that mode 1 24%, mode 1&2 16%, mode 2 60%. So they preferred mode 2 by 60%. The differences between two modes are the direction of throttle and pitch. Direction of throttle and pitch operate opposite way. They prefer mode 2 because mode 2 has similarities of manned flight control mode. Significance of this study is that it showed the necessity of standardization and flight control preference in a quantitative way. It will help drone standardization in related industries and development direction near future.

항공기 자세회복을 위한 자동회복장치 설계 및 검증에 관한 연구 (A Study on the Design and Validation of Pilot Activated Recovery System to Recovery of an Aircraft Unusual Attitude)

  • 김종섭;조인제;강임주;허기봉;이은용
    • 제어로봇시스템학회논문지
    • /
    • 제14권3호
    • /
    • pp.307-317
    • /
    • 2008
  • Relaxed static stability(RSS) concept has been applied to improve aerodynamic performance of modem version supersonic jet fighter aircraft. Therefore, flight control system are necessary to stabilize an unstable aircraft and provides adequate handling qualities. Also, flight control systems of modem version aircraft employ a safety system to support emergency situations such as a pilot unknown attitude flight conditions of an aircraft in night flight-testing. This situation is dangerous because the aircraft can lose if the pilot not take recognizance of situation. Therefore, automatic recovery system is necessary. The system called the "Pilot Activated Recovery System" or PARS, provided a pilot initiated automatic maneuver capable of an aircraft recoveries in situations of unusual attitudes. This paper addresses the concept of PARS and designed using nonlinear control law design process based on model of supersonic jet trainer. And, this control law is verified by nonlinear analysis and real-time pilot evaluation using in-house software. The result of evaluation reveals that the PARS support recovery of an aircraft unusual attitude and improve a safety of an aircraft.

소형 통합형 비행조종컴퓨터 개발 (Development of the compact Integrated Flight Control Computer)

  • 장성호;구삼옥;박주원
    • 항공우주시스템공학회지
    • /
    • 제2권1호
    • /
    • pp.17-21
    • /
    • 2008
  • A compact, light-weight, integrated flight control computer(IFCC) for small unmanned autonomous vehicles is developed. Its design objective is to produce an all in one avionics system which includes the navigation sensor, data link, attitude sensors and air data sensors. The initial phase of ground and flight tests are performed to verify the prototype IFCC, showing promising results. The high potential of its application is expected.

  • PDF