• 한국약용작물학회지
• /
• 제11권5호
• /
• pp.321-328
• /
• 2003

Various presowing seed treatments have been used to enhance the rates of germination and afterward seedling emergence. Seeds treated by them occasionally have not shown the same rate in indoor and field. The presowing treatments considering germination mechanism and factors affecting germination should be totally included in indoor experiments so that the results drawn could be reproduced in the field. Seed drying after the treatments and field conditions after sowing especially able to show Phytochromemediated responses related to light treatment must be determined prior to force the treatments to seeds. After set up these prerequisites to promote the rates of germination and emergence, many seed treatments proposed so far must be fixed how to be done; alone, sequential and simultaneous.

• 산업기술연구
• /
• 제22권B호
• /
• pp.169-173
• /
• 2002

In this paper, we discussed an effective VDSL frequency plan for symmetric 10MDSL service. The frequency plan 998 and plan 997 for asymmetric VDSL services have been not optimally designed for 10MDSL services. To obtain the reaches and data rates of 10MDSL, we proposed two frequency allocation schemes : Static method and dynamic method. We can select frequency bands with their fixed boundaries in static method while with their variable boundaries in dynamic method. To show the effectiveness of our proposed methods, we performed some simulations about plan 997 and plan 998, new static method, and new dynamic method. According to the simulation results, the proposed dynamic method can provide the best data rates and reaches for 10 Mbps symmetric VDSL services.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.1-7
• /
• 2003

This paper considers an Integrated one-vendor multi-buyer production-inventory model where the vendor manufactures multiple products In lot at Her associated finite production rates In the model. It is allowed for earth product to be shipped In lot to the buyers before the whole product production is not completed yet. Each product lot is dispatched to the associated buyer In a number or shipments. The buyers consume their products at fixed rates. The objective is to the production and shipment schedules in the Integrated system. which minimizes the mean total annual cost per unit time. The mean total annual cost consists or production setup cost inventory holding cost and shipment cost. For the model, an Iterative optimal solution procedure with shipment consolidation policy incorporated is derived. It is then tested through numerical experiments to show how efficient and effective He shipment consolidation policy is.

• 경영과학
• /
• 제31권3호
• /
• pp.13-26
• /
• 2014

This paper considers an integrated one-vendor multi-buyer production-inventory model where the vendor manufactures multiple products in lot at their associated finite production rates. In the model, it is allowed for each product to be shipped in lot to the buyers even before the whole product production is not completed yet. Each product lot is dispatched to the associated buyer in a number of shipments. The buyers consume their products at fixed rates. The objective is to the production and shipment schedules in the integrated system, which minimizes the total cost per unit time. The total cost consists of production setup cost, inventory holding cost and shipment cost. For the model, an iterative optimal solution procedure with shipment consolidation policy incorporated. It is then tested through numerical experiments to show how efficient and effective the shipment consolidation policy is.

• Structural Engineering and Mechanics
• /
• 제5권6호
• /
• pp.755-765
• /
• 1997

Within the framework of anisotropic combined viscoplastic hardening formulation, accounting macroscopically for residual stress as well as texture development at finite deformations of metals, simple shear analyses for the simulation of fixed-end torsion experiments for ${\alpha}$-Fe, Al and Cu at different strain rates are reviewed with an emphasis on the role of constitutive spins. Complicated responses of the axial stresses with monotonically increasing shear deformations can be successfully described by the capacity of orthotropic hardening part, featuring tensile axial stresses either smooth or oscillatory. Temperature effect on the responses of axial stresses for Cu is investigated in relation to the distortion and orientation of yield surface. The flexibility of this combined hardening model in the simulation of finite inelastic strains is discussed with reference to the variations of constitutive spins depending upon strain rates and temperatures.

• 한국연소학회지
• /
• 제9권3호
• /
• pp.1-9
• /
• 2004

This study is aimed to characterize the combustion behavior of solid fuel in the various types of the combustors: stoker, rotary kiln and fluidized bed type combustors. Three different types of reduced-scale combustors are introduced, and temperatures and flue gas compositions are measured for various fuel sizes, water contents, initial temperature, and air flow rates. In case of the rotary kiln combustor, effects of rotating speed of the combustor are also investigated. Mean carbon conversion time (MCCT) and flame propagation rate (FPR) are used for the quantitative analysis. It is revealed that the reaction rates of the fuel are significantly influenced by the fuel characteristics, type of the combustors and air flow rate. Major design parameters for each type of the combustors are summarized through the reduced-scaled model analysis.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 제11회 음성통신 및 신호처리 워크샵 논문집 (SCAS 11권 1호)
• /
• pp.199-204
• /
• 1994

In this paper, we researched abut CELP speech coding algorithm using efficlent pseudo-stochastic block codes, adaptive-codebook and improved fixed-gain codebook. The pseudo-stochastic block codes refer to stochastically populated block codes in which the adjacent codewords in an innovation codebook are non-independent. The adaptive-codebook was made with previous prediction speech data by storage-shift register. This CELP coding algorithm enables the coding of toll quality speech at bit rates from 4.8kbits/s to 9.6 kbits/s. This algorithm was realized TMS320C30 microprocessor in realtime.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.481-484
• /
• 1998

In this study, oxide(TEOS) CMPs were carried out for various head pressures. Table and head speeds are fixed at 25 RPM. Head pressures are 5, 7.5, 10, 12.5 PSI, and under these conditions, 1,587, 1,631, 2,556, 2,871.agns./min of oxide (TEOS) removal rates and 14.7, 18.5, 9.52, 7.9% of uniformities are obtained, respectively. Also, these experiments for local and global planarizations were done using the patterned 4" wafers. These conditions are applicable to STI(shallow trench isolation) structures and planarizations for sub-half micron lithography.aphy.

• Korea-Australia Rheology Journal
• /
• 제19권1호
• /
• pp.7-16
• /
• 2007

A dynamic Monte Carlo percolation grid simulation is used to predict the cure behaviour of thermoset materials. Molecules are distributed in a fixed grid and a probability of reaction is assigned to each pair of neighbouring units considering both reaction rates and diffusion. The concentration and network characteristics are predicted throughout the whole curing process and compared to experimental data for an epoxy-amine matrix.

• 약학회지
• /
• 제37권1호
• /
• pp.95-99
• /
• 1993

Peroxidase activity of cytochrome P-450 was examined using N, N-dimethylaniline (NDA) as a substrate and cumene hydroperoxide (CHP) as an oxidant. The initial rates of the N-demethylation for varied concentrations of NDA (0.05-0.5 mM) by P-450 at different fixed concentrations of CHP (0.02-0.2 mM) were determined. The results suggest that P-450 proceeds its peroxidative reaction by the rapid equilibrium random bi bi mechanism to form a ternary complex with substrate and oxidant as an active intermediate.