• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.941-946
• /
• 1992

Three different reflux policies are compared for a batch distillation process in which a fixed recovery with a given average purity of the distillate is required ; the first, for the constant distillate purity ; the second, for the constant reflux ratio ; finally, for the optimal reflux policy which gives the minimum operation time. The optimal reflux policy was obtained using pontryagin's maximum principle. Througy the numerical simulations for the three different binary mixtures, it was found that the time advantage of the optimal reflux operation over the constant overhead composition operation varies form 10.0 to 22.4% and the advantage over the constant reflux operation varies from 1106 to 36.6% in the three cases considered.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.6
• /
• pp.90-98
• /
• 1996

We have evaluated the theoretical conversion loss and noise temperature of mixer using the quantum mixer theory and the method to determine the embedding impedance of waveguide-type mixer mount. At fixed backshort position of the mixer, the calculated SSB mixer conversion loss and mixer noise temperature are 5 dB and 10K within frequency range form 85 GHz to 115 GHz, respectively. The SIS mixer has been developed by using through on the calculated rsutls to observe cosmic radio waves. SIS junction of mixer is Nb/Al-AlOx/Nb and it consists of four series array. Area of each of junction is about 2.5${\mu}m^{2}$. The average receiver noise temperature of manufactured receiver with this mixer is about 30 K(DSB). The receiver noise temperature is much lower than that of receiver with a mixer using mechanical tuning backshort.

• Transactions of Materials Processing
• /
• v.13 no.1
• /
• pp.59-64
• /
• 2004

Nano-scratch tests were performed on PMMA thin films spin-coated on a Si substrate using an atomic force microscopy (AFM) with loads ranging form 10nN to 100nN. At low loads, a ridge pattern was formed on the PMMA thin film surface. No wear particles were observed during the pattern-forming mild wear. At high loads, severe wear by plowing occurred, accompanied by wear particles. The film with the highest hardness showed the highest wear resistance. Friction force generated during the scratching was measured, which was closely related with surface deformation of the film. A simple empirical equation to deduce scratch hardness of the film from a linear fixed-distance scratch test was proposed, and scratching-speed dependency of the scratch hardness was displayed.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.293-297
• /
• 2003

A series of laboratory experiments was conducted to investigate the fixation characteristics of poly(vinylalcohol)-poly(methacrylic acid)(PVA-PMAA) mixed solution on the soluble (equation omitted)-radionuclides. Using the potentiometric titration technique, it was found out that the PVA and PMAA in a solution form intermacromolecular complex. The mobilized portion of each radionuclide by water from sand surface treated with a fixative was measured by ${\gamma}$-ray spectroscopy, The mobilized portion of minor radionuclides such as $^{241}$ Am, $^{154}$ Eu, $^{155}$ Eu and $^{144}$ Ce were higher than those of $^{134}$ Cs and $^{137}$ Cs. The capability of PVA-PMAA system was better among the candidate solutions for the fixation of total (equation omitted)-radioactivity, $^{134,137}$Cs which is composed of more than 85 % of total ${\gamma}$-radioactivity could be fixed effectively by the PVA-PMAA solution.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.31.2-31.2
• /
• 2017

The central regions of barred-spiral galaxies contain interesting gaseous structures such as dust lanes and nuclear rings with intense star formation. While our previous studies were useful in understanding the formation of these structures star formation history, they were limited to 2D isothermal galaxies in which the stellar disk and halo are modeled by fixed gravitational potentials. To study the effects of bar growth as well as the vertical dimension, we use the mesh-free hydrodynamic code named GIZMO and run 3D simulations by treating the stellar disk and halo as being live. We find that the new 3D models form the gaseous features similarly to the previous 2D models, although the detailed formation processes are quite different. For example, a ring has a large radius when it first forms and shrinks over time in the previous 2D models. In the 3D live-potential models, however, a ring forms small and grows in size with time. We present the results of the new simulations and discuss them in comparison with the previous 2D results.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.249-254
• /
• 1987

This paper presents a new method for generating smooth free-form surface by local correction. B-spline surface is used for its convenience of local correction, and the direction of surface correction is fixed to the average-surface-normal direction. The surface to be corrected is approximated into a uniform cubic B-spline surface. Then, the smoothness (curvature arrows, iso-parametric lines) of the approximated surface is displayed with B-spline control points. When a control point near the region that needs correction is selected, a new point 1 mm higher than the original control point in the direction of the average surface normal is displayed. And the surface is corrected by giving the amount of control point movement interactively. Since the direction of correction is given by the program and the amount of correction is selected by the user, the method is called semiautomatic. sufficiently smooth surface can be obtained by this method. Examples are given to illustrate the method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1992.11a
• /
• pp.3-6
• /
• 1992

A new analytical expression for the saturated I-V characteristics of hydrogenerated amorphous silicon thin film transistors(a-si:H TFT) is presented and experimentally verified. The results show that the experimental transfer and output characteristics at several temperatures are easily modeled. The model is based on three functions obtained from the experimental data of $I_D$ versus $V_G$. Theoretical results confirm the simple form of the model in terms of the device geometry. It was determined that the saturated drain current increased at a fixed gate voltage and the device saturated at increasingly larger drain voltages while the threshold voltages decreased.

• Journal of applied mathematics & informatics
• /
• v.14 no.1_2
• /
• pp.237-249
• /
• 2004

Consider the second order self-adjoint neutral difference equation of form $\Delta(a_n$\mid$\Delta(x_n\;-\;{p_n}{x_{{\tau}_n}}$\mid$^{\alpha}sgn{\Delta}(x_n\;-\;{p_n}{x_{{\tau}_n}}\;+\;f(n,\;{x_{g_n}}\;=\;0$. In this paper, we will give the classification of nonoscillatory solutions of the above equation; and by the fixed point theorem, we present some existence results for some kinds of nonoscillatory solutions of the equation.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.10 no.2
• /
• pp.54-64
• /
• 1985

Biomass conversion processes have the potential for satisfying approximately 25% of the national demand for methane gas. At the current time very littel analytical work has been done to optimally design and operate the production facilities associated with these processes. This study was motivated by the high cost of these proposed systems. The biomass in storage decays (exponentially) with time while the batch methane production rate decreases (exponentially) over time. The basic problem is to determine the optimal residence times for batches in the anaerobic degester to maximize total production over a fixed planning horizon. The analysis characteries the form of the optimal policy and presents efficient algorithm for obtaining this solution.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.E1
• /
• pp.29-38
• /
• 2007

A cylindrical tube connection that has a voltage difference and is separated electrically by an insulator was modelled. The penetration efficiencies of charged particles passing through the connector tube were investigated. Typically, as the particle size decreases and the applied voltage difference increases, the penetration efficiency decreases. To assess the effect of the electrode geometry, various lengths of electric insulator and aerosol flow rate with a fixed tube length and tube diameter were used when calculating penetration efficiencies. The comparison of penetration efficiencies for various electrode geometry setups suggests that the penetration efficiency can be described as a function of the product of applied voltage and electrical mobility of charged particles. The diffusion loss from this and previous studies are compared. Further, an explicit form for penetration efficiency is provided as a function of a new non-dimensional parameter, $Es(=Z_pV/U_{avg}W);\;P_{es}=0.2{\cdot}{\exp}(-Es/0.6342)+0.8{\cdot}{\exp}(-Es/4.7914)$.