• Journal of information and communication convergence engineering
• /
• v.13 no.3
• /
• pp.215-219
• /
• 2015

Cells in a culture process transform with time and produce many overlapping cells in their vicinity. We are interested in a separation algorithm for images of overlapping cells taken using a fluorescence optical microscope system during a cell culture process. In this study, all cells are assumed to have an ellipse-like shape. For an ellipse fitting-based method, an improved least squares method is used by decomposing the design matrix into quadratic and linear parts for the separation of overlapping cells. Through various experiments, the improved least squares method (numerically stable direct least squares fitting [NSDLSF]) is compared with the conventional least squares method (direct least squares fitting [DLSF]). The results reveal that NSDLSF has a successful separation ratio with an average accuracy of 95% for two overlapping cells, an average accuracy of 91% for three overlapping cells, and about 82% accuracy for four overlapping cells.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.413-414
• /
• 2009

• The Journal of Information Systems
• /
• v.31 no.1
• /
• pp.25-58
• /
• 2022

Purpose The purpose of this study is to analyzes the RPA fitting processes by the casese of manufacturing SMEs(Small and Medium-sized Enterprises) in an exploraty approach. Based on the findings on the RPA fitting processes, we intend to provide a cornerstone for developing a general-purpose RPA introduction model in the future. Design/methodology/approach In this study, empirical cases of RPA fitting processes were analyzed based on interviews with project managers of specialized IT suppliers in charge of RPA development and managers of IT departments of manufacturing SMEs that actually introduced RPA. In order to explore various RPA fitting process in the manufacturing value chain, a total of 7 manufacturing SMEs were interviewed, ranging from companies using a legacy system to companies without a legacy system. Over the primary and secondary activity processes, the details of RPA processes were analyzed in the steps of 'Frequency Identification, Input Processing, Source Identification, Inquiry and Processing, Information Registration, Result Reporting'. Findings From the analysis, we derived some exploratory results that the processes over 0.25 FTE and related with many suppliers and clients are fitting for RPA introduction in manufacturing SMEs Our results will provide basic data for the development of the future general-purpose RPA introduction model for manufacturing SMEs, providing practical reference for RPA introduction.

• Journal of the military operations research society of Korea
• /
• v.25 no.2
• /
• pp.158-169
• /
• 1999

This paper is concerned with the application of generalized linear interactive modelling(GLIM) to the binary categorical data. To analyze the categorical data given by a contingency table, finding a good-fitting loglinear model is commonly adopted. In the case of a contingency table with a response variable, we can fit a logit model to find a good-fitting loglinear model. For a given $2^4$ contingency table with a binary response variable, we show the process of fitting a loglinear model by fitting a logit model using GLIM and SAS and then we estimate parameters to interpret the nature of associations implied by the model.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.04a
• /
• pp.63-66
• /
• 2003

Thermoforming of fiber reinforced thermoplastic (FRTP) braided tubes was studied as a new forming technique. FRTP braided tubes with four plies are fabricated by the pressure bonding method are used in thermoforming. Bulge forming, bending process, pipe fittings and FE analysis are carried out in this study. In bulge forming the composite tube can be expanded up to about two times initial diameter. The suggested bending process can be obtained bent products with various bending radii. In pipe fitting it is possible to fabricate T-shape fitting, cross fitting and two-branch fitting. These results exhibit developed forming processes become useful processes for textile composite tubes.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.3
• /
• pp.43-49
• /
• 2015

This paper describes the design of a forged fitting form to acquire a method of product design measurement by target measurement standards. The pipefitting connects each pipe and combines seals and nipples with the pipes normally. Therefore, the section combined with the fitting pipe was measured by a 3D scanner, and the acquired measurement and the design measurement were obtained after modification of the forged fitting pipe by that standard. Moreover, the accuracy of the model was verified through leakage testing of the oil and verification of the design measurement for accuracy decisions on the design measurement after modification of the product.

• Journal of Korea Multimedia Society
• /
• v.15 no.7
• /
• pp.941-950
• /
• 2012

A virtual garment fitting system which fits the top and bottom of a garment on 3D body data is introduced. This system uses the laser scanned 3D body data and the digital images photographed the front and back of a garment. The digital images are modeled to reflect tensions among particles in the images and the friction and gravity effects are considered in the fitting process to the body data. When a bottom is fitted, a virtual belt to hold the bottom in the waist is introduced since gravity effects pull down it. Also the process for fitting the top and bottom on layers is proposed here. The system has the strengths that it uses only the front and back image of a garment instead of using complicated patterns of a garment, and provides a realistic fit result as a 3D figure. As on-line retailing shop in present displays front and back images of garments, this system also does. However this system provides a differentiated service to user than present retailing shop as showing a 3D fit image. It will make a new trend in online shop retailing of garment.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.3 no.1
• /
• pp.21-25
• /
• 2009

Generally, fully implantable middle ear hearing device (F-IMEHD) is implanted under the skin nearby human temporal bone with all components including implantable microphone and vibration transducer. The microphone and transducer have different characteristic before and after implant. Fitting process is performed for this characteristic change of them and proper performance of hearing aids for each patient. Conventional hearing aids and partially implantable hearing aids, they have wired connector for fitting process. However in case of F-IMEHD, it is difficult this wired connection, because all components of F-IMEHD is implanted. In this paper, fitting software that can be apply wireless fitting hardware for F-IMEHD has been designed and implemented. It can find out proper fitting parameter reflecting characteristics of the microphone and transducer for patients who has difficulty in hearing.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.1
• /
• pp.87-95
• /
• 2009

The applicability of optimization techniques for hull surface fitting has been important in the ship design process. In this research, the Genetic Algorithm has been used as a searching technique for solving surface fitting problem and minimizing errors between B-spline surface and the ship's offset data. The encoded design variables are the location of the vertex points and parametric values. The sufficient accuracy in surface fitting implies not only various techniques for computer-aided design, but also the future production design.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.49-53
• /
• 2001

Recently hydroforming process became a process which is increasingly applied in the automotive industry. As the hydroforming process is a new technology, there is no abundant data to assist manufacturing the products. To investigate the effects of process parameters on the tube hydroforming process, simple bulging, circular bulging and Tee-fitting tests are performed. The optimal leading path to escape the failure modes(bursting, wrinkling) is determined and the effects of the process parameters, the internal pressure and axial feeding on the product quality, such as thickness distribution, forming height and branch dome shape are investigated.