Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Selection and Verification of Press Forming Pipe Model using Pipefitting

피팅용 프레스 포밍 파이프 성형 모델 선정 및 검증

  • Received : 2014.12.05
  • Accepted : 2014.12.11
  • Published : 2015.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

This paper describes the design of a forged fitting form to acquire a method of product design measurement by target measurement standards. The pipefitting connects each pipe and combines seals and nipples with the pipes normally. Therefore, the section combined with the fitting pipe was measured by a 3D scanner, and the acquired measurement and the design measurement were obtained after modification of the forged fitting pipe by that standard. Moreover, the accuracy of the model was verified through leakage testing of the oil and verification of the design measurement for accuracy decisions on the design measurement after modification of the product.

Keywords

Acknowledgement

Supported by : 우수제조기술연구센터(ATC)

References

  1. S. Yuan, Z. R. Wang and Q. He, "Finite element analysis of hydro-forming precess of a toroidal shell", International journal of Machine Tools and Manufacture, Vol. 39, pp. 1439-1450, 1999 https://doi.org/10.1016/S0890-6955(98)00096-0
  2. S.H. Teoh and E. H. Ong, "Tenshil and pressure rupture behaviour of flow-formed high density polyethylene pipes", polymer, Vol.36, pp. 101-107, 1995 https://doi.org/10.1016/0032-3861(95)90681-Q
  3. R. Velasco and N. Boudeau, "Tube bulging test: Theoretical analysis and numerical validation", Journal of Materials Processing Technology, Vol.205, pp.51-59, 2008 https://doi.org/10.1016/j.jmatprotec.2007.11.106
  4. T. Ohashi, and K. Hayashi, "Lateral Extrusion of A6063 Aluminum Alloy Pipes", Journal of Materials Processing Technology, Vol.138, pp.560-563, 2003 https://doi.org/10.1016/S0924-0136(03)00146-8
  5. N. Akkus, K. Manabe, M. Kawahara, and H. Nishimura , "A Finite-element Model for the Superplastic Bulging Deformation of Ti-alloy pipe", Journal of Materials Processing Technology, Vol.68, pp.215-220, 1997 https://doi.org/10.1016/S0924-0136(96)00104-5
  6. S. J. Yuan, Z. Xu, Z. R. Wang, and W. Hai, "The Integrally Hydro-forming Process of Pipe Elbows", International Journal of Pressure Vessels and Piping, Vol.75, pp.7-9, 1998 https://doi.org/10.1016/S0308-0161(97)00107-5