• 한국산업보건학회지
• /
• 제34권1호
• /
• pp.1-7
• /
• 2024

Objectives: The study was performed to investigate characteristics of hazardous factors regarding chemical(liquid lime) tank dredging workers by case survey. Methods: Field data such as working condition, MSDS and respirators applied to chemical tank dredging work were analyzed and the work environmental factors of noise and indoor air quality were measured to compare existing data with actual work situations. Results: No health hazards to workers due to working conditions were confirmed during dredging work inside the chemical storage tank. All air quality measurement data during dredging work satisfied the management standards, and there were no by-products. During dredging work, there was a significant change in noise depending on the type of work, but considering the noise reduction rate(NRR) of the earplugs worn by workers, there was no actual health hazard due to noise exposure. Conclusions: A fit test for respirator and the expiration date of the safety helmet should be observed to ensure an appropriate level of safety and health for dredging workers in the chemical storage tank.

• 한국가정과교육학회지
• /
• 제4권1호
• /
• pp.57-75
• /
• 1992

The purpose of this study was to survey the actual condition of education on the western clothing construction in Home Economics and Housework curriculum of high school. And the finding of this study will the helpful to the persons in authority who take part in the course of compilation of the western clothing contruction. The subjects of this study were 101 high school teachers in Chonbuk province. Their responses to the questionaires were analyzed by frequencies and percentiles. The major findings of the study were as follows. 1. Most high school had only a little educational facilities for learning of clothing construction of, if any, they could only show examples in practice. 2 In case of making clothes, students who sew by hand carried out drafting and cutting on their desks in the classroom. When they have practical training, 56.4% of them cheese only one of one-piece dress trousers, and skirt which are presented in the textbook. The related teachers indicated that content composition of the texbook was not fit for the purpose of the students level, and also pointed out the deficiencies of educational facilities, lack of teacher’s research and training, and lack of school hours of evaluation, practical skill was performed in parallel with paper-test at 73.3%. 3. Pajamas and one-piece dress presented in the textbook were the most suitable for the practice at 64.7%. They hoped that illustrations in textbook are so large and full that clothes made through the practice can be worn. Also they hoped that their opinions and wearable guidance will be reflected in the textbook. They emphasized the need of western clothing construction unit because of acquistion of elementary knowledge. The current amount of content composition was enough or excessive. In addition, they understood the curriculum of high school is rather closely connected with that of middles school. Their recognition of the rate of difficulty is very similar to that of other school teachers. They recognized the goal of learning should be applied to the real home life.

• 디지털콘텐츠학회 논문지
• /
• 제16권1호
• /
• pp.63-70
• /
• 2015

본 연구는 PACS의 영상저장부의 디스크 배열에 들어가는 하드디스크의 수명을 제조회사의 가속 수명시험 결과로 예측하고자 하였다. $50^{\circ}C$, $60^{\circ}C$의 고장시간 데이터로 Anderson-Darling 적합도 검증을 진행하여 와이블 분포를 채택하였다. 형상모수와 척도모수로 동일성 검증을 진행한 결과, 가속 수명 시험 $50^{\circ}C$ 조건과 가속 수명 시험 $60^{\circ}C$ 조건의 확률분포가 통계적으로 유의하지 않았다. 온도 가속인자를 포함한 와이블-아레니우스 모형으로부터 추정한 형상모수는 1.0409이며, 사용조건($30^{\circ}C$)의 특성수명은 24603.5 시간이었다. 또한 아레니우스 모델 식에 반영하여 활성화 에너지 0.5011 eV을 산출하였다. 그리고 가속시험의 정확성 확보차원에서 가속시험 불량시료와 시장 반품 시료로 고장 분석을 진행한 결과, 불량 모드별 점유율의 세부 차이는 있으나, 점유율 순서는 일치 하였다. 본 연구는 PACS 환경 하에서 하드디스크의 가속시험절차를 제안하며, 제조자와 사용자간에 수명예측에 도움을 주고자 한다.

• 한국인구학
• /
• 제35권1호
• /
• pp.53-75
• /
• 2012

본 연구의 목적은 노인집단에 대한 사회적 인식과 태도를 평가할 수 있는 연령주의(Ageism) 척도를 개발하는 것이다. 기존 연구를 통해 개발된 노인집단에 대한 인식 및 태도와 관련된 측정도구들을 평가하고 이에 기초하여 노화불안, 노인에 대한 인식(편견, 고정관념, 기피), 차별행동 등 연령주의에 대한 다차원적인 내용이 포함되도록 문항을 개발했으며 이에 대한 검증작업을 수행하였다. 연구결과를 요약하면, 연령주의 척도를 개발하기 위하여 기존 연구를 바탕으로 다차원적 문항을 정리하고 전문가 자문을 거쳐 예비문항 44개 문항을 구성하였으며, 사전조사 분석을 통하여 31개의 예비문항을 제안하였다. 그리고 18세 이상 1,535명을 대상으로 문항에 대한 검증을 실시하였다. 내적신뢰도 분석을 통해 8문항을 정리하여 23개 문항을 대상으로 탐색적 요인분석과 확인적 요인분석을 하였다. 연구결과 최종적으로 7개 하위요인으로 구성된 21개 문항이 구성되었다. 하위 요인으로는, 노화에 대한 인식으로서 노화에 대한 불안, 외모변화에 대한 태도를 설명하는 요인과 한편 노년에 대한 긍정적인 기대를 나타내는 요인도 나타났다. 그리고 노인에 대한 편견, 기피/회피를 나타내고 극단적으로 노인집단과의 분리를 나타내는 요인, 연령(고령)에 대한 차별 행동이 주요한 요인으로 추출되었다. 연령주의 척도는 사회구성원으로서 노인집단의 위치와 상황을 파악하는데 도움이 될 것이다. 그리고 나아가 이 결과는 노인관련 정책을 수립하고 노인관련 업무를 실천하는 현장에 노인에 대한 사회적 인식 및 태도에 대해 재인식할 수 있는 기회를 제공할 것이다.

• 한국항해항만학회지
• /
• 제38권6호
• /
• pp.689-694
• /
• 2014

The Korean government has introduced and enforced maritime traffic safety assessment to secure traffic safety since 2010. The maritime traffic safety assessment is needed by law to design a new port or modify an existing one. According to Korea Maritime Safety Act, in the assessment the propriety of marine traffic system consists of the safety of channel transit and berthing/unberthing maneuver, safety of mooring, and safety of marine traffic flow. The safety of channel transit and berthing/unberthing maneuver can be evaluated only by ship-handling simulation. The ship-handling simulation is carried out by sea pilots working with the port concerned. The vessel's proximity measure is an important factor to evaluate traffic safety. The proximity measure is composed of vessel's closest distance to channel boundary and probability of grounding/collision. What is more, the probability of grounding becomes important. According to central limit theorem, a sample has a normal distribution on condition that its size is more than 30. However, more than 30 simulation runs bring about the increase of assessment period and difficulty of employing sea pilots. Therefore this paper is to find out minimum sample size for evaluating vessel's proximity. First sample sets of size of 3, 5, 7, 9 etc. are selected randomly on the basis of normal distribution. And then KS test for goodness of fit and t-test for confidence interval are applied to each sample set. Finally this paper decides the minimum sample size. As a result this paper suggests the minimum sample size of 5, that is, the simulation of more than five times.

• 한국압력기기공학회 논문집
• /
• 제15권2호
• /
• pp.19-30
• /
• 2019

In this study, to evaluate conservatism of various fatigue life evaluation procedures, fatigue tests were conducted using compact tension (CT) specimens with a round notch, made of A516 Gr.70 carbon steel and A240 TP304 stainless steel, under load-controlled cyclic condition. Experimental fatigue failure cycles were measured and compared with predicted fatigue lives using two different life evaluation methods; (1) Design-By-Analysis (DBA) procedure given in ASME B&PV Code, Sec. III, Div. 1, Subsec. NB-3200 and (2) structural stress-based approach provided in ASME B&PV Code, Sec. VIII, Div. 2, Part 5. To predict fatigue failure cycles, three-dimensional elastic finite element analysis was conducted. Fatigue lives were predicted by both design fatigue curve given in ASME B&PV Code, Sec. III, Div. 1, Appendices and best-fit fatigue curve suggested in NUREG/CR-6815 for the DBA procedure. Finally, fatigue lives evaluated by various methods were compared with test results, and then conservatism between each evaluation procedure was discussed.

• 임상간호연구
• /
• 제27권3호
• /
• pp.279-293
• /
• 2021

Purpose: The purpose of this study was to develop a Korean nursing work environment scale for critical care nurses (KNWES-CCN) and verify its validity and reliability. Methods: A total of 46 preliminary items were selected using content validity analysis of experts on 64 candidate items derived through literature reviews and in-depth interviews with critical care nurses. 535 critical care nurses from 21 hospitals responded to the preliminary questionnaire from February to March 2021. The collected data were analysed using construct, convergent and discriminant validities, and internal consistency and test-retest reliability. Results: The 23 items in 4 factors accounted for 55.6% of the total variance were identified through item analysis and exploratory factor analysis (EFA). EFA was performed with maximum likelihood method including direct oblimin method. In the confirmatory factor analysis, KNWES-CCN consisted of 21 items in 4 factors by deleting the items that were not meet the condition that the factor loading over .50 or the squared multiple correlation over .30. This model was considered to be suitable because it satisfied the fit index and acceptable criteria of the model [𝒳²=440.47 (p<.001), CMIN/DF=2.41, GFI=.86, SRMR=.06, RMSEA=.07, TLI=.90, CFI=.91]. The item total correlation values ranged form .32 to .73 and its internal consistency was Cronbach's α=.92. The reliability of the test-retest correlation coefficient was .72 and the intra-class correlation coefficient was .83. Conclusion: The KNWES-CCN showed good validity and reliability. Therefore, it is expected that the use of this scale would measure and improve nursing work environment for critical care nurses in Korea.

• Journal of Periodontal and Implant Science
• /
• 제35권3호
• /
• pp.563-575
• /
• 2005

The aim of present study is to evaluate the influence of adjacent tooth to the microbiology of clinically healthy implant. Control group included patients who had clinically healthy implant and tooth with healthy $periodontium(PD{\leq}3mm)$, test group was composed of patients who had clinically healthy implant and tooth with periodontal pocket(PD>3mm). The criteria of clinically health implant are no pain or discomfort, the restorative suprastructure provide satisfactory fit and function, and the tissue around the fixtures were firm and probing with standard periodontal probe with a rounded tip 0.5mm in diameter resulted in penetration of no more than 5mm when using a force of 0.5N at any location. 38 patients, partially edentulous subjects with endosseous root-form implants were selected. All subjects were medically healthy and had not taken systemic antibiotics and professional plaque control 3 months before sampling. Number of control group is 25(mean age $52{\pm}13$, 26 teeth, 34 implants) and test group is 13(mean age $60{\pm}13$, 13 teeth, 17 implants). All teeth and implants of each patient were examined probing depth(PD), bleeding on probing(BOP), and plaque index(PI), and samples of subgingival plaque were obtained at each site with sterile curet or fine paper points, then the plaque transferred to PBS. Obtained samples were examined for the presence of P. gingivalis, T. forsythensis, and T. denticola by the polymerase chain reaction(PCR). The relationship among clinical parameters and the colonizations by the 3 bacterial species from natural teeth and implants region were analyzed by student t-test. The results of this study were as follows: 1. PD was different in teeth between 2 groups(p<0.05), but the other parameters were not. 2. Statistically significant difference was not found in clinical parameters of implants between 2 groups. 3. All bacterial prevalences of teeth were higher in test group than in control group, and prevalence of T. forsythensis had statistically significant difference between 2 groups(p<0.05). 4. Prevalences of P. gingivalis and T. forsythensis are higher in test group than control group, and that of T. denticola is higher in control group than in test group. But there were no statistically significant differences between 2 groups. In conclusion, there is no statistically significant difference in prevalence of implant microbiology between 2 groups. But if the number of samples increased, it will be possible to find out statistical significance in prevalence of P. gingivalis. It seems that pocket of adjacent tooth influences prevalence of P. gingivalis. These results mean that improvement of the periodontal condition before implantation is very important.

• 대한치과보철학회지
• /
• 제45권5호
• /
• pp.611-620
• /
• 2007

Statement of problem: Second-generation indirect composite resins have been improved flexural strength, compressive strength, hydrolytic degradation resistance, wear resistance compared to first-generation indirect composite resins, but there are still some problems as hydrolysis and low wear resistance. Some manufacturers claim that wear resistance of their materials has been improved, but little independent study has been published on wear properties of these materials and the properties specified in the advertising materials are largely derived from in-house or contracted testing. Purpose: This study was to evaluate the wear of indirect composite resins (SR Adore, Sinfony, Tescera ATL) and gold alloy against the human enamel. Material and method: Extracted human incisors and premolars were sectioned to $2{\times}2{\times}2mm$ cube and embedded in the clear resin and formed conical shaped antagonist to fit the jig of pin-on-disk tribometer. Total 20 antagonists were stored in distilled water. Five disk samples, 24mm in diameter and 1.5mm thick, were made for each of three groups of indirect composite resins and gold alloy group, and polished to #2,000 SiC paper on auto-polishing machine. Disk specimens were tested for wear against enamel antagonists. Wear test were conducted in distilled water using a pin-on-disk tribometer under condition (sliding speed 200rpm contact load 24N, sliding distance 160m). The wear of the enamel was determined by weighing the enamel antagonist before and after test, and the weight was converted to volumes by average density. The wear tracks were analyzed by scanning electron microscopy and surface profilometer to elucidate the wear mechanisms. Statistical analysis of the enamel wear volume, wear track depth and wear tract width of disk specimens were accomplished with one-way ANOVA and the means were compared for significant differences with Scheffe's test. Results: 1. The enamel wear was most in gold alloy, but there were no statistically significant differences among all the groups (P>.05). 2. In indirect composite resin groups, the group to make the most shallow depth of wear tract was Sinfony, followed by Tescera ATL, SR Adoro (P<.05). Gold alloy was shallower than Sinfony, but there was no statistically significant difference between Sinfony and gold alloy (P>.05). 3. The width of wear tract of SR Adore was larger than the other groups (P<.05), and there were no statistically significant differences among the other groups (P>.05). 4. SEM analysis revealed that Sinfony and gold alloy showed less wear scars after test, Tescera ATL showed more wear scars and SR Adore showed the most. Conclusion: Within the limits of this study, Sinfony and gold alloy showed the least wear rates and showed similar wear patterns.

• 한국식품위생안전성학회지
• /
• 제25권3호
• /
• pp.238-244
• /
• 2010

현재 살균소독제의 국가 공인시험법은 시험관 내에서 행하는 현탁액시험법으로 실제 현장의 표면 살균을 정확히 평가하기에는 무리가 있다. 본 연구는 국제적으로 표준화되어 있는 3가지 정량적 표면시험법간의 유효성 평가력 비교를 목적으로 E. coli와 S. aureus를 대상으로 시중 유통되는 대표적 5개 계열 살균소독제의 유효성을 평가하였다. 그 결과 E. coli와 S. aureus에 대한 각 방법별 살균소독력은 ASTM(1)법에서 5.18 $\pm$ 0.03, 5.27 $\pm$ 0.04 log cfu/carrier, ASTM (2)법에서 4.63 $\pm$ 0.04, 3.97 $\pm$ 0.03 log cfu/carrier, CEN EN 13697법의 청정조건(CEN(1))에서 6.14 $\pm$ 0.05, 5.31 $\pm$ 0.10 log cfu/carrier, 오염조건(CEN(2))에서 4.37 $\pm$ 0.02, 4.06 $\pm$ 0.01 log cfu/carrier로 나타났다. CEN(1)시험법이 ASTM(2)와 CEN(2) 시험법에 비해 살균소독력이 유의적으로 높게 평가되었다. 적용된 3개의 시험법 중 유리를 담체로 사용한 ASTM(1)법에 비해 스테인리스 스틸을 사용한 ASTM(2)와 CEN법 적용 시 살균소독효과가 낮게 평가되었다. 결론적으로 3 가지 국가 공인시험법간 유효성 평가결과가 달랐으며, 실제 식품제조 현장에서 사용되는 표면에서의 살균소독력을 정확히 평가하기 어렵다는 것을 확인할 수 있었다.