• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.2
• /
• pp.166-175
• /
• 1990

The conventional FIR filters can be very expensive to implement due to the complexity of multibit multipliers. This paper presents an new type of multiplierless structure which is particularly suited to the hardware implementation of small, low cost, low power, high speed digital filters. The filter structures consisting of a transversal filter with tap coefficiented to the combination of two elements of the set {0, $\pm$$2^n$;n = integer} and cascaded with a integrator are proposed. Performance has been tested via simulation on a digital computer, and the results show that the response characteristics of presented filters are as equally good as those of conventional finitewordlength filters.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.9
• /
• pp.570-576
• /
• 2005

In FIR (Finite Impulse Response) filter applications, Nth-band FIR digital filters are known to be important due to their reduced computational requirements. The conventional methods for designing FIR filters use iterative approaches such as the well-known Parks-Mcclellan algorithm. the Parks-Mcclellan algorithm is also used to design Nth-band FIR digital filters. But a disadvantage of the Parks-McClellan algorithm Is that it needs a good amount of design time. This paper describes a direct design method for third-band FIR Filters using Chebyshev polynomial, which provide a reduction in design time over indirect methods such as the Parks-McClellan algorithm. The response of the resulting filter is equi-ripple in passband. The proposed method of design produces a passband response that is equi-ripple to within a minuscule error, compare to that of the Parks-McClellan algorithm.

• Journal of applied mathematics & informatics
• /
• v.40 no.3_4
• /
• pp.445-460
• /
• 2022

In this paper, we studied on 𝛽-fuzzy filters of Stone almost distributive lattices. An isomorphism between the lattice of 𝛽-fuzzy filters of a Stone ADL A onto the lattice of fuzzy ideals of the set of all boosters of A is established. The fact that any 𝛽-fuzzy filter of A is an e-fuzzy filter of A is proved. We discuss on some properties of prime 𝛽-fuzzy filters and some topological concepts on the collection of prime 𝛽-fuzzy filters of a Stone ADL. Further we show that the collection 𝓣 = {X^𝛽(λ) : λ is a fuzzy ideal of A} is a topology on 𝓕Spec_𝛽(A) where X^𝛽(λ) = {𝜇 ∈ 𝓕Spec_𝛽(A) : λ ⊈ 𝜇}.

• International Journal of Internet, Broadcasting and Communication
• /
• v.7 no.2
• /
• pp.9-15
• /
• 2015

Various studies with regard to increasing the optical efficiency of plasmonic color filters have previously been conducted, such as mixing materials or applying diverse pattern shapes. Fundamentally, it is important to maximize the photonic crystal effect by finding the optimum periods of lattice as well as calculating the most efficient transmission area. In this study, we propose a technical method for optimizing the plasmonic color filters that have a high color gamut and luminance by analyzing the light spectrums based on the 1931 color coordinate system. Moreover, we suggest a calculation method in order to define the individual color purity of red and green and blue filters. Consequently, efficiency values are obtained independently from each color filter by evaluating the color purity and the luminance. The final result obtained from simulation are 27.6% of relative luminance and 25.3% of color gamut. The proposed optimization method is applicable to all plasmonic color filters having photonic crystal arrays.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.344-347
• /
• 1995

The standard estimation and filtering theory are well known and has recently been incorporated with the H$_{\infty}$ optimization techniques where the parametrizations of all estimators and filters are utilized. The issue of reducing its order is always of interest. This paper presents a method for synthesizing low-order stable state estimators. The method presented in this paper is based on the utilization of a free parameter function contained in the parametrization of all state estimators. The results obtained in the paper are compared with standard results on low-order estimators. Both results are shown to be the same in a sense of its orders, but the approaches taken are largely different. It is also shown in the paper that the method can easily and directly be extended to the Kalman filters and the H$_{\infty}$ (sub)optimal filters. Consequently, the orders of all state estimators, Kalman filters, and H$_{\infty}$ filters are shown to be reduced down to the number of states minus the number of outputs, respectively.ly.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.1
• /
• pp.1-7
• /
• 2004

This study has been numerically conducted to investigate the removal efficiency of Volatile Organic Compound (VOC) for different photocatalytic honeycomb filters. Recently, the photocatalysis is being applied to air-cleaner, air-conditioner and vacuum-cleaner with the capability of air-purification, sterilization and antibiosis. However, photocatalysis is less efficient than other methods for removing VOC except in the case of low concentration. So far most of studies have focused on an improvement of the photocatalytic materials, but this study have placed emphasis on the improvements of shape of photocatalytic honeycomb filter. UV irradiation, concentration profile and pressure drop have been investigated for different cross sections of filters and for different filter lengths. Light intensity is dropped sharply with increasing distance from the UV-lamp, and becomes very low in the middle of the filters. Since photocatalytic reaction rate is a function of light intensity, VOC concentration gradient might be small in the middle of long filters. Thus, most of reaction have risen within only three times of dimensionless axial distance. These results can be used effectively for the design of advanced photocatalytic honeycomb filters.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.89-94
• /
• 2006

In order to increase the signal-to-noise ratio in multi-component seismic data, we developed new polarization filters based on the method of multicomponent complex trace analysis. Unlike the previous polarization filters, the present filters separately compute linear and elliptic components at each time sample using amplitude ratio of horizontal and vertical components of body waves and ellipticity of Rayleigh waves. The polarization filters work ideally even with low S/N data. Application of the filters to both synthetic and real seismic data shows that Rayleigh waves of elliptic motions are effectively eliminated and both P and S waves of linear motions are well separated each other.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.6
• /
• pp.276-282
• /
• 2019

The purpose of this study was to analyze the structure of general filter using ultrafine filter (Profilter), dust collector filter, HEPA (HAPA-High Efficiency Particulate Air) filter, deodorized filters, etc. of air purifiers and to study new types of purified filters that can improve ultrafine dust, harmful gases, and sterilization cleanup performance. The study was also conducted by adding photocatalyst filters to the existing step-by-step filtration filter types, which were proposed in the design three coupling structure filters of the left and right UV-LED installation frames and the photocatalyst coating honeycomb frame. Future research is needed on the effect of photocatalyst filters. This study was to investigate the application and structure of photocatalyst filters to air purifiers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.5
• /
• pp.340-348
• /
• 1986

The design of two-dimensional zero-phase FIR digital filters by transformations is a popular and well-developed technique, but is suffers from the disadvantage that in its current form the filters with only four quadrant symmetry can not be designed exactly circular symmetry at frequencies far from the origin. it is shown how symmetry requirement for the filters with any number of dimensions can be fulfilled with arbbitrary percision by adapting transformation with the appropriate series expansions. this transformation has been known generally as the McClellan transformation. In this paper, a simple method for ensuring exelent circular symmetry at frequencies far from the origin is presented. This method which employs the Modified Mcclellan trnsformation for the design of 2-D FIR filter form 1-D FIR filters is quite useful for the design of 2-D FIR filters with multiple cutoff boundaries such as band-pass filters.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.7
• /
• pp.1424-1428
• /
• 2004

In this paper, CMOS analog filters for use in the Analog front End of digital subscriber loop(DSL) chip set are proposed. Designed filters contain receiver continuous-time filters which are composed of lowpass and highpass functions. And their cutoff frequency are 138H1z and 1.1MHz respectively. A low-voltage gm-c integrator is improved and used to design filters. Desisned filters are verified by HSPICE simulation with the 0.25${\mu}m$ CMOS n-well parameter.