• 센서학회지
• /
• 제30권1호
• /
• pp.1-9
• /
• 2021

This mini review summarizes some of the recent advances in machine-learning (ML)-driven chemical and biological sensors. Specific focus is on field-effect-transistor (FET)-based sensors with a description of their structures and detection mechanisms. Key ML techniques are briefly reviewed for an audience not familiar with the basic principles. We mainly discuss two aspects: (1) data analysis based on ML and (2) ML applied to sensor design. In conclusion, the challenges and opportunities for the advancement of ML-based sensors are briefly considered.

• Macromolecular Research
• /
• 제10권2호
• /
• pp.75-79
• /
• 2002

Organic materials have considerable attention as active semiconductors for device applications such as thin-film transistors (TFTs) and diodes. Pentacene is a p-type organic semiconducting material investigated for TFTs. In this paper, we reported the morphological and electrical characteristics of pentacene TFT films. The pentacene transistors showed the mobility of 0.8 $\textrm{cm}^2$/Vs and the grains larger than 1 ${\mu}{\textrm}{m}$. Deep-level transient spectroscopy (DLTS) measurements were carried out on metal/insulator/organic semiconductor structure devices that had a depletion region at the insulator/organic-semiconductor interface. The duration of the capacitance transient in DLTS signals was several ten of seconds in the pentacene, which was longer than that of inorganic semiconductors such as Si. Based on the DLTS characteristics, the energy levels of hole and electron traps for the pentacene films were approximately 0.24, 1.08, and 0.31 eV above Ev, and 0.69 eV below Ec.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.9-10
• /
• 2006

Recent work in our laboratory has focused on the molecular and supramolecular engineering of conjugated polymers and oligomers for device applications, including light emitting diodes for displays and lighting, photovoltaic cells, and thin film transistors. A central finding is that the supramolecular structure of conjugated polymers can have a dominant influence on their properties and the performance of devices. Some major results include: highly efficient RGB light-emitting diodes from polymers and oligomers; high mobility n-channel polymer field effect transistors; ambipolar thin film transistors from copolymer semiconductors; and self-assembly and ambipolar charge transport in polymer nanowires.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.896-898
• /
• 2009

The printed electrodes of organic thin-film transistors (OTFTs) were fabricated by screen printing using nanoparticle silver pastes. The screen printed OTFT corresponds to channel lengths between 7.6 to 82.6 ${\mu}m$ (designed L=10 to 80 ${\mu}m$) on the $150{\times}150mm^2$ paper. The channel length deviations for 40 to 80 ${\mu}m$ patterns were less than 5 %. However, the channel lengths for 10 to 30 ${\mu}m$ patterns were increased by 20 %. The screen printed bis(triisopropyl-silylethynyl) pentacene (TIPS-pentacene) OTFTs obtained had a field-effect mobility as large as 0.08 (${\pm}0.02$) $cm^2$/Vs, an on/off current ratio of $10^5$ and a subthreshold slope of 1.95 V/decade.

• 한국전기전자재료학회논문지
• /
• 제29권9호
• /
• pp.527-531
• /
• 2016

In this study, p-type thin film transistors consisting of CuO channels were fabricated by sol-gel process, with copper (II) acetate monohydrate precursors. At $500^{\circ}C$, the deposited films were fully converted into monoclinic phase CuO. The fabricated CuO thin film transistors deliver field effect mobility in saturation regime of $0.015cm^2/Vs$, and $I_{on}/I_{off}$ of ${\sim}10^3$. The degradation of the performance of the fabricated CuO thin film transistor caused by the exposure to air has been studied.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(2)
• /
• pp.401-406
• /
• 1997

This paper presents preliminary results on the degradation of BJTs(Bipolar Junction Transistors) and MOSFETs(Metal Oxide Semiconductor Field Effect Transistors) by 1MeV electron beam. Exposure experimental results show that the change of minority-carrier life time in base region dominates the behavior of BJTs and that the buildup of charges in oxide region can affect the value of threshold voltage for MOSFETs. It was possible to correlate the decrease of the minority-carrier life time of BJTs with irradiation dose, while the shift of MOSFETs' threshold voltage was not only a function of charge buildup in oxide region.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권5호
• /
• pp.525-536
• /
• 2014

Recently, the first generation of mass production of FinFET-based microprocessors has begun, and scaling of FinFET transistors is ongoing. Traditional capacitance and resistance models cannot be applied to nonplanar-gate transistors like FinFETs. Although scaling of nanoscale FinFETs may alleviate electrostatic limitations, parasitic capacitances and resistances increase owing to the increasing proximity of the source/drain (S/D) region and metal contact. In this paper, we develop analytical models of parasitic components of FinFETs that employ the raised source/drain structure and metal contact. The accuracy of the proposed model is verified with the results of a 3-D field solver, Raphael. We also investigate the effects of layout changes on the parasitic components and the current-gain cutoff frequency ($f_T$). The optimal FinFET layout design for RF performance is predicted using the proposed analytical models. The proposed analytical model can be implemented as a compact model for accurate circuit simulations.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.190-193
• /
• 2002

The processing technology of organic thin-film transistors (Ons) performances have improved fur the last decade. Gate insulator layer has generally used inorganic layer, such as silicon oxide which has properties of a low electrical conductivity and a high breakdown field. However, inorganic insulating layers, which are formed at high temperature, may affect other layers termed on a substrate through preceding processes. On the other hand, organic insulating layers, which are formed at low temperature, dose not affect pre-process. Known wet-processing methods for fabricating organic insulating layers include a spin coating, dipping and Langmuir-Blodgett film processes. In this paper, we propose the new dry-processing method of organic gate dielectric film in field-effect transistors. Vapor deposition polymerization (VDP) that is mainly used to the conducting polymers is introduced to form the gate dielectric. This method is appropriate to mass production in various end-user applications, for example, flat panel displays, because it has the advantages of shadow mask patterning and in-situ dry process with flexible low-cost large area displays. Also we fabricated four by four active pixels with all-organic thin-film transistors and phosphorescent organic light emitting devices.

• 마이크로전자및패키징학회지
• /
• 제30권3호
• /
• pp.83-87
• /
• 2023

전자 및 반도체 기술 분야에서는 Si를 대체할 혁신적인 반도체 소재 연구가 활발하게 진행 중이다. 그러나 대체 소재에 대한 연구는 진행 중이지만 2차원 물질을 채널로 사용하는 트랜지스터의 구성요소, 특히 기생 저항과 RF(고주파) 응용 프로그램과의 관계에 대한 연구는 매우 부족한 편이다. 본 연구는 이러한 부족한 부분을 메우기 위해 다양한 트랜지스터 구조에 중점을 두고 전기적 성능에 미치는 영향을 체계적으로 분석하였다. 연구 결과, Access 저항과 Contact 저항이 반도체 소자 성능 저하의 주요 요인 중 하나로 작용함을 확인하였으며, 특히 고도로 scaling down된 경우 그 영향이 더욱 두드러지는 것을 확인하였다. 고주파 RF 소자에 대한 수요가 계속해서 증가함에 따라 원하는 RF 성능을 달성하기 위한 소자 구조 및 구성 요소를 최적화하기 위한 가이드라인을 수립하는 것은 매우 중요하다. 본 연구는 2차원 물질을 채널로 사용하는 다음 세대 RF 트랜지스터의 설계 및 개발에 도움이 될 수 있는 구조적 가이드라인을 제공함으로써 이 목표에 기여할 수 있다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1150-1153
• /
• 2006

In this paper, we investigated the effect of solvent on electrical properties of triisopropylsilyl (TIPS) pentacene organic thin-film transistors (OTFTs). The TIPS pentacene was spin coated by using chlorobenzene, p-xylene, chloroform and toluene as solvent. Fabricated OTFT with chlorobenzene showed field-effect mobility of $0.01\;cm^2/V{\cdot}s$, on/off ratio $4.3{\times}10^3$ and threshold voltage of 5.5 V. In contrast, with chloroform the mobility was $5.8{\times}10^{-7}\;cm^2/Vs$, on/off ratio $1.1{\times}10^2$ and threshold voltage of 1.7 V.