• Title/Summary/Keyword: field resistance

Search Result 2,408, Processing Time 0.034 seconds

Structural Analysis of Class I Integron Gene Cassette and Assessment of Genetic Relationships by PFGE of Salmonella enterica Serovar Typhimurium Isolated in Gyeongbuk Area (경북지역에서 분리된 Salmonella enterica Serovar Typhimurium의 Class I Integron Gene Cassette 특성과 PEGE 유형분석)

  • Sohn, Chang-Kyu;Lee, Jung-A;Lee, Do-Young;Hun, Wan;Jung, Jung-Kyo
    • Korean Journal of Microbiology
    • /
    • v.42 no.1
    • /
    • pp.12-18
    • /
    • 2006
  • Thirty five Salmonella enterica serovar Typhimurium strains were isolated from diarrheic patients and pigs in Gyeongbuk area from 2003 to 2004. All 35 strains (17 strains from diarrheic patients and 18 from pigs) were resistant to more than one drug and most of strains isolated from pigs were resistant to ampicillin, ohloram-phenicol, streptomycin, sulfamethoxazole-trimethoprime, tetracyclin and nalidixic acid. Each isolate was also screened or the presence of class I, II and III integron gene cassettes. Among 35 strains,3 out of 17 strains isolated from diarrheic patients, carried dhfrX-orfF-aadA2 integron gene cassette and among 18 strains isolated from diseased pigs, 11 strains carried dhfrX-orfF-aadA2 integron gene cassette and 1 strain carried aadA2 integron only. But any class II and class II integron gene cassette were not detected in 35 strains. Thirty five strains were divided by five pulsotypes. Thirty one strains out of thirty five were pulsotype A. Among the remaining 4 strains, one each strain belonged to pulsotype B, C, D and pulsotype E. This data of pulsotypes showed that the widespread of pulsotype A, Salmonella enterica serovar Typhimurium in human and pigs in Gyeongbuk area may have been caused by the dissemination of a few epidemic strains in this area. Thirteen strains contain dhfrX-orfF-aadA2 integron gene cassette showed pulsotype A and one strain contains dhfrX-orfF-aadA2 integron gene cassette showed pulsotype B. One strain contains aadA2 integron showed pulsotype E. But fifteen strains do not contain any integron showed pulsotype A.

Environment-Friendly Control of Beet Armyworm, Spodoptera exigua (Noctuidae: Lepidoptera) to Reduce Insecticide Use (농약 사용 저감화를 위한 환경 친화적인 파밤나방(Spodoptera exigua)의 방제)

  • Jin, Da-Yong;Paek, Seung-Kyung;Kim, Jin-Su;Choi, Su-Yeon;Park, Chan;Kim, Tae-Hwan;Jin, Na-Young;Jung, Sun-Young;Youn, Young-Nam;Yu, Yong-Man
    • Korean journal of applied entomology
    • /
    • v.48 no.2
    • /
    • pp.253-261
    • /
    • 2009
  • For the environment-friendly control of beet armyworm, Spodoptera exigua, in spring onion fields, we have examined an alternative application method. Twenty-five insecticides registered for spring onion were tested for control effect against the beet armyworm in the laboratory, then the best 9 chemical and a single biological insecticides were selected and compared with 2 new isolates of Bacillus thuringiensis in a polyvinyl house. After that, 4 chemical and 3 B. thuringiensis treatments were used in the field for the control of beet armyworm in the spring onion. Two application methods are used: one is triple treatments with the same chemical and the other is alternative application with different chemicals and B. thuringiensis for 7 days intervals. Indoxacarb WP - chlorfluazuron EC - B.t. var. kurstaki CAB141 and indoxacarb WP - methoxyfenozide + spinosad SC - Chlorfluazuron EC - B.t. var. aizawai CAB109, B.t. var. kurstaki CAB141 showed greater than 78% mortality of beet armyworm larvae and greater than 43% damage decrease in spring onions infested by beet armyworm. These results showed that alternative applications had higher control effect than any other applications. It was suggested that alternative applications with microbial biological agents such as B. thuringiensis might minimize the development of insecticide resistance and might be used as the environment-friendly control of the beet armyworm.

A Dynamic Behavior Evaluation of the Curved Rail according to Lateral Spring Stiffness of Track System (궤도시스템의 횡탄성에 따른 곡선부 레일의 동적거동평가)

  • Kim, Bag-Jin;Choi, Jung-Youl;Chun, Dae-Sung;Eom, Mac;Kang, Yun-Suk;Park, Yong-Gul
    • Proceedings of the KSR Conference
    • /
    • 2007.11a
    • /
    • pp.517-528
    • /
    • 2007
  • Domestic or international existing researches regarding rail damage factors are focused on laying, vehicle conditions, driving speed and driving habits and overlook characteristics of track structure (elasticity, maintenance etc). Also in ballast track, as there is no special lateral spring stiffness of track also called as ballast lateral resistance in concrete track, generally, existing study shows concrete track has 2 time shorter life cycle for rail replacement than ballast track due to abrasion. As a result of domestic concrete track design and operation performance review, concrete track elasticity is lower than track elasticity of ballast track resulting higher damage on rail and tracks. Generally, concrete track has advantage in track elasticity adjustment than ballast track and in case of Europe, in concrete track design, it is recommended to have same or higher performance range of vertical elastic stiffness of ballast track but domestically or internationally review on lateral spring stiffness of track is very minimal. Therefore, through analysis of service line track on site measurement and analysis on performance of maintenance, in this research, dynamic characteristic behaviors of commonly used ballast and concrete track are studied to infer elasticity of service line track and experimentally prove effects of track lateral spring stiffness that influence curved rail damage as well as correlation between track elasticity by track system and rail damage to propose importance of appropriate elastic stiffness level for concrete and ballast track.

  • PDF

The Effect of IAA on $Colocasia$ $esculenta$'s Growth and Morphogenesis (IAA가 토란의 생장 및 형태 발생에 미치는 영향)

  • Kim, Young-Eun;Lee, Joon-Sang
    • Korean Journal of Environmental Biology
    • /
    • v.29 no.2
    • /
    • pp.92-97
    • /
    • 2011
  • Morphological and physiological differences of $Colocasia$ $esculenta$ were investigated in the cultivation of hydorphonic and soil culture. $C.$ $esculenta$ grown in Hoa.+IAA (indole-acetic acid) showed higher growth activity representing 9%, 32%, 38% and 60% than those of the cultivation of vermiculate, Hoagland solution, soil and water, respectively. In case of $F_v/F_m$ ratio experiments, the value $F_v/F_m$ of $C.$ $esculenta$ cultivated in the water showed 0.55 after 6 weeks. $F_v/F_m$ values of $C.$ $esculenta$ cultivated in Hoagland+IAA, vermiculate and soil were between 0.84 and 0.80 indicating $F_v/F_m$ values were about 45% higher than that of $C.$ $esculenta$ cultivated in the water. Diffusion resistance was 45~35% lower in $C.$ $esculenta$ grown in Hoa.+IAA solution than that of $C.$ $esculenta$ grown in water only after 5 and 6 weeks. Therefore, the high standing levels of the growth rate, fluorescence activity and transpiration rate were Hoa.+IAA, vermiculate, Hoagland, soil and water. The distinct morphological differences of $C.$ $esculenta$ cultivated in hydorphonic and soil culture were the appearance of the seed corm and root hair. The development of seed corm was well established in soil culture but the corm in hydorphonic was slowly hydrolyzed and then disappeared. The fibrous root systems of hydorphonic were very well distinguishable compared with that in soil culture. Outstanding results of this experiment were appeared in $C.$ $esculenta$ which was cultivated in the field provided with enough mineral nutrition, organic fertilizers and compound fertilizers. The most height taros were almost 2m and the numbers of seed corm were 30~40 after 7 months.

A Numerical Study of Hydraulic Fractures Propagation with Rock Bridges (Rock bridges를 고려한 수치 해석적 수압파쇄 균열거동 연구)

  • 최성웅
    • Proceedings of the Korean Society for Rock Mechanics Conference
    • /
    • 2000.09a
    • /
    • pp.201-210
    • /
    • 2000
  • Rock bridge in rock masses can be considered as one of several types of opening-mode fractures, and also it has been known to have a great influence on the stability of structures in rock mats. In the beginning of researching a rock bridge it used to be studied only in characteristics of its behavior, as considering resistance of material itself. However the distribution pattern of rock bridges, which can affect the stability of rock structures, is currently researched with a fracture mechanical approach in numerical studies. For investigating the effect of rock bridges on the development pattern of hydraulic fractures, the author analyzed numerically the stress state transition in rock bridges and their phenomena with a different pattern of the rock bridge distributons. From the numerical studies, a two-crack configuration could be defined to be representative of the most critical conditions for rock bridges, only when cracks are systematic and same in their length and angle. Moreover, coalescence stresses and onset of propagation stresses could be known to increase with decreasing s/L ratio or increasing d/L ratio. The effect of pre-existing crack on hydraulic fracturing was studied also in numerical models. Different to the simple hydraulic fracturing modeling in which the fractures propagated exactly parallel to the maximum remote stress, the hydraulic fractures with pre-existing cracks dial not propagate parallel to the maximum remote stress direction. These are representative of the tendency to change the hydraulic fractures direction because of the existence of pre-existing crack. Therefore s/L, d/L ratios will be identical as a function effective on hydraulic fractures propagation, that is, the $K_{I}$ vague increase with decreasing s/L ratio or increasing d/L ratio and its magnification from onset to propagation increases with decreasing s/L ratio. The scanline is a commonly used method to estimate the fracture distribution on outcrops. The data obtained from the scanline method can be applied to the evaluation of stress field in rock mass.s.

  • PDF

A Numerical Study of Hydraulic Fractures Propagation with Rock Bridges (Rock bridges를 고려한 수치 해석적 수압파쇄 균열거동 연구)

  • 최성웅
    • Tunnel and Underground Space
    • /
    • v.10 no.3
    • /
    • pp.447-456
    • /
    • 2000
  • Rock bridge in rock masses can be considered as one of several types of opening-mode fractures, and also it has been known to have a great influence on the stability of structures in rock mass. In the beginning of researching a rock bridge it used to be studied only in characteristics of its behavior, as considering resistance of material itself. However the distribution pattern of rock bridges, which can affect the stability of rock structures, is currently researched with a fracture mechanical approach in numerical studies. For investigating the effect of rock bridges on the development pattern of hydraulic fractures, the author analyzed numerically the stress state transition in rock bridges and their phenomena with a different pattern of the rock bridge distributions. From the numerical studies, a two-crack configuration could be defined to be representative of the most critical conditions for rock bridges, only when cracks are systematic and same in their length and angle. Moreover, coalescence stresses and onset of propagation stresses could be known to increase with decreasing s/L ratio or increasing d/L ratio. The effect of pre-existing crack on hydraulic fracturing was studied also in numerical models. Different to the simple hydraulic fracturing modeling in which the fractures propagated exactly parallel to the maximum remote stress, the hydraulic fractures with pre-existing cracks did not propagate parallel to the maximum remote stress direction. These are representative of the tendency to change the hydraulic fractures direction because of the existence of pre-existing crack. Therefore s/L, d/L ratios will be identical as a function effective on hydraulic fractures propagation, that is, the K$_1$ value increase with decreasing s/L ratio or increasing d/L ratio and its magnification from onset to propagation increases with decreasing s/L ratio. The scanline is a commonly used method to estimate the fracture distribution on outcrops. The data obtained from the scanline method can be applied to the evaluation of stress field in rock mass.

  • PDF

Freeze-thaw Resistance Estimation of Concrete using Surface Roughness and Image Analysis (콘크리트의 동결융해 저항성 추정을 위한 표면 거칠기 및 이미지 분석의 적용성)

  • Lee, Binna;Lee, Jong Suk
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.22 no.3
    • /
    • pp.1-7
    • /
    • 2018
  • As part of a research dedicated to the field evaluation of the durability of concrete subjected to freezing-thawing, this study analyzes the relationship between the surface roughness and the relative dynamic elastic modulus through image analysis. Four mix compositions with water-to-binder ratios (W/B) of 40%, 50%, 60% and 70% and without AE agent were considered to provoke early freezing. The basic physical properties of the mixes including the relative dynamic elastic modulus and the compressive strength were first evaluated experimentally according to W/B. Then, tests were performed to measure the surface roughness followed by photographs and SEM image analysis. The measured surface roughness tended to increase with larger number of freezing-thawing cycles regardless of W/B. The relative dynamic elastic modulus appeared to increase gradually with the number of cycles for the relatively denser mixes with W/B of 40% and 50%. Besides, the surface roughness increased only at rupture for the mixes with W/B of 60% and 70%. Moreover, the analysis of the photographs of the surface of the mixes with W/B of 40% and 50% revealed that the degradation progressed gradually from the surface with the freezing-thawing cycles. However, for the mixes with W/B of 60% and 70%, apparent change of the surface remained very insignificant until rupture at which damage like cracking could be observed. Consequently, the analysis of surface photograph or the measurement of the surface roughness presented some limitation in assessing the degree of freezing-thawing-induced degradation in case of relatively porous specimens. On the other hand, the photograph and surface roughness appeared to be sufficient for assessing such degradation for the mixes with W/B of 40% and 50%. Accordingly, the image of the surface and the surface roughness are potentially applicable on site for the assessment of freezing-thawing damages in relatively dense mixes.

Effect of Seed Method and Seeding Rate on the Agronomic Characteristics and Yield of Forage Barley (파종방법 및 파종량이 사료용 보리의 생육특성 및 수량에 미치는 영향)

  • Kim, W.H.;Seo, S.;Shin, J.S.;Lim, Y.C.;Kim, K.Y;Choi, K.C.;Kim, C.H.
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.24 no.4
    • /
    • pp.317-323
    • /
    • 2004
  • This study was carried out to determine the effect of seed method and seeding rate on the desirable agronomic characteristics and yield of forage barley(Hordeum vuigare) at paddy field, National Livestock Research Institute, RDA, Suwon from October 2001 to May 2003. The experiment was arranged in a spilt plot design with three replications. Main plots consisted of tow seed method; Broadcasting and drilling, Sub-plots consisted of seeding rates; 130. 160, 190 and 220 kg/ha. The results obtained were summarized as fellows ; The resistance of cold, disease and lodging of barley for the seeding method and seed rate were not different. And dry matter percentage of barley for a seeding method of 130 kg/ha at the broadcasting was the lowest of $32.0\%$, and that for the drilling at 130 kg/ha was $32.7\%(P<0.05). Fresh yield of barley for a seeding method of drilling at 130 kg/ha was the highest of 32,073 kg/ha, and that for a seeding method of broadcasting at 130 kg/ha was the lowest of 20,944 kg/ha(P<0.05). Dry matter yield of barley for a seeding method of drilling at 160 and 130 kg/ha were the highest 9,170 and 9,138 kg/ha, and that fur a seeding method of broadcasting at 130 kg/ha was the lowest of 5,710 kg/ha(P<0.05). Based on the results of this experiment, it appears that the seeding method and rate of barley could be enhanced by drilling from 130 to 160 kg/ha, and broadcasting from 190 to 220 kg/ha. respectively.

Growth Characteristics, Seed and Forage Productivity of New Naked Oat (Avena nuda L.) Cultivar "Jungmo2005" (귀리 품종 '중모2005'의 생육특성과 종실 및 조사료 생산성)

  • Han, Ouk-Kyu;Park, Tae-Il;Park, Hyung-Ho;Park, Ki-Hun;Oh, Young-Jin;Ku, Ja-Hwan;Kweon, Soon-Jong;Ahn, Jong-Woong
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.37 no.1
    • /
    • pp.28-34
    • /
    • 2017
  • A new naked oat cultivar, 'Jungmo2005'(Avena nuda L.), was developed for food and forage use by National Institute of Crop Science, RDA in 2010. It was derived from a cross between $F_1$['Early80'/'Gwiri33'] and $F_1$['Early80'/'Gwiri23']. 'Early80', a covered oats, has early heading and high yielding, while 'Gwiri23' of covered type and 'Gwiri33' of naked type has early heading with large-size grain. 'Jungmo2005' has the characteristics of narrow and long leaves of pale green color, middle diameter culm of yellow color and medium grain of whitish yellow color. Cultivar 'Jungmo2005' had 2 days earlier heading date (May 9) than the check cultivar 'Seonyang' (May 11) in field condition. The 'Jungmo2005' showed better winter hardiness than that of the check cultivar, and similar to the check cultivar in respect to lodging resistance. The 'Jungmo2005' had 105 cm of culm length, 21.5 cm of spike length, 658 spikes per $m^2$, 82 grains per spike, 23.3 g of 1,000-grain weight, and 622 g of test weight. The grain yield of 'Jungmo2005' was averaged $3.38MT\;ha^{-1}$, which was 6% higher than that of the check. Average forage fresh and dry matter yield of 'Jungmo2005' harvested at milk-ripe stage were 44.8 and $12.6tone\;ha^{-1}$, respectively, compared with 47.5 and $12.5tone\;ha^{-1}$ of the check. The protein content of the 'Jungmo2005' was similar to the check (7.6% and 7.5%, respectively), while ADF (28.6%) and NDF (51.5%) were lower than the check (31.4% and 57.0%, respectively). TDN content and RFV were higher than those of the check (66.3%, 120.3 and 64.1, 105.2, respectively). 'Jungmo2005' is recommended for fall sowing cropping only in the south area where daily minimum mean temperatures are averaged higher than $-4^{\circ}C$ in January, and it should not be cultivated in mountain areas, where frost damages is likely to occur. The areas would do better only to sow in spring season.

Comparative Study on the Productivity for Silage Corn (Zea mays L.) Variety Certified Import Adaptability in Pyeongchang Area (사일리지용 옥수수 수입적응성 인증 품종의 평창지역 생산성 비교 연구)

  • Kim, Jong Geun;Li, Yu Wei;Park, Hyung Soo;Kim, Jong Duk
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.37 no.2
    • /
    • pp.161-167
    • /
    • 2017
  • This experiment was conducted to comparison study on the productivity for certified varieties of import adaptability of silage corn in Pyeongchang area. Total eight varieties (Gangpyeongok, 31N27, 32P75, 32W86, P3156, P3394, DK 689 및 DK 729) were evaluated. The experimental design was 8 treatment of randomized block with three replications. Corn varieties were cultivated in experimental field of Pyeongchang campus, SNU from 1 May to 2 September, 2015 and plot size was $15m^2$. Plant height of 32W86 and ear height of Gwanpyeongok was the highest (p<0.05). Tasseling and silking date was 27 July-3 August and silking occurred after 1-3 day of tasseling. Average day to silking was 92 days and that of 31N27 variety was short (p<0.05). The varieties of DeKalbo Company (DK 689 and DK 729) required more times to silking. Average GDD (growth degree day) of eight varieties was $1,023^{\circ}C$ and P3352 was the lowest GDD. In the trials of resistance evaluation, P3394 was strong in disease, P3156 was the highest in insect. All varieties did not show the lodging and variety of DK 729 showed the highest stay green score (p<0.05). Average dry matter content was 30.77%, it showed higher trend in DM. 32W86 was the highest DM content among the varieties, but there was no significant difference among varieties (p>0.05). The weight per ear was the highest in 32W86 and the lowest in Gwanpyeongok. The ration of ear to whole plant was higher in 32W86 and P3394, but it was not found the significant difference (p>0.05). Average yield of fresh and DM was 59,017 and 13,476 kg/ha, respectively. DK 689 showed higher DM and TDN yield than others, but there was not significant difference (p>0.05). According to results, the difference of productivity was not found among certified variety of import adaptability of silage corn. The varieties Gwanpyeongok, 32W86 and 32P75 would be recommendable in Pyeongchang area for stable cultivation.