• 한국표면공학회지
• /
• 제57권3호
• /
• pp.201-207
• /
• 2024

This study compared the chemical resistance properties according to various sealing treatment methods for the anode film formed during the anodization process of Al6061 alloy. Al6061 aluminum was used in four different sealing treatment methods: boiling water sealing, lithium sealing, nickel sealing, and pressurized sealing, and each sample was evaluated for corrosion resistance through a 5% HCl bubble test and the microstructure was observed through a scanning electron microscope(SEM). According to the results, corrosion resistance increased as time and temperature increased in all sealing treatment methods. Relatively, corrosion resistance was high in the order of boiling water sealing, lithium sealing, nickel sealing, and pressure sealing, and the best corrosion resistance was found in pressure sealing. These research results can be helpful in selecting a process necessary to improve the efficiency and performance of anodizing process in the industrial field using aluminum alloys.

• 한국안전학회지
• /
• 제39권2호
• /
• pp.22-27
• /
• 2024

The purpose of this study is to explore the trend in insulation resistance values according to temperature and overcurrent by conducting an investigation on the actual condition and experiments on the electrical wiring during the melting furnace process. In addition, the Arrhenius equation is used to determine whether temperatures in the furnace operating process can be applied to the actual field. In the investigation of the actual condition, the insulation resistance started to decrease seven years after replacement, even though cables in oil pump A were replaced in 2010. Both the experimental and theoretical values of the insulation resistance obtained using the Arrhenius equation decreased with an increase in temperature. Errors in insulation resistance (MΩ) values between tests and the Arrhenius equation ranged from ±2 to ±10, demonstrating a high similarity. Results revealed that when the insulation resistance cannot be measured in a manufacturing workplace (quarterly analysis), it can be estimated by partially applying the Arrhenius equation.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 봄 학술발표회 논문집
• /
• pp.201-208
• /
• 2004

To substitute conventional reinforced-concrete bridge deck, glass composite precast bridge deck - Delta Deck/sup TM/, which possesses advantages of light weight, high strength, corrosion resistance and durability, is developed for the DB24 truck load. Pultruded composite bridge deck is designed and fabricated. To verify serviceability and structural safety, finite element analysis, structural testing such as flexural test, local fatigue test, flexural fatigue test and field tests are conducted. In this paper structural characteristics of developed deck and its field application in Korea is presented.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.113-120
• /
• 2005

To substitute conventional reinforced-concrete bridge deck glass composite precast bridge deck - Delta $Deck^{TM}$, which possesses advantages of light weight, high strength, corrosion resistance and durability, is developed for the DB24 truck load. Pultruded composite bridge deck is designed and fabricated. In this paper some field applications and field load test of developed composite deck bridge are presented.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.676-681
• /
• 2000

This paper covers durability and field application of marine concrete which have been enhanced the resistance against deterioration in seawater. Fly ash concrete is applied to make the concrete with good durability. It is well known fly ash in concrete has a good performance preventing fro a sulphate attack and a steel corrosion. Several durability tests were performed to find characteristics of marine concrete which is proposed in this paper comparing with normal concrete. Field application was executed to compare results with laboratory test and to give a reliability to engineers. The project was supported by Ministry of Marine Affairs and Fisheries for two years.

• Journal of the Korean Wood Science and Technology
• /
• 제46권5호
• /
• pp.497-510
• /
• 2018

본 연구에서는 과열증기를 이용하여 열처리한 낙엽송재의 야외 내후성 시험을 통해 부후균과 해충에 대한 저항성을 평가하였다. 12개월간 진행된 야외 내후성 시험 결과, 무처리재는 흰개미에 의한 피해가 두드러지게 나타났지만 방부목재와 과열증기 열처리재에서는 육안으로 관찰되는 피해는 발견되지 않았다. 무처리재와 방부목재는 약 5%의 질량 감소를 보였으며, 과열증기 열처리재는 약 1%의 질량 감소를 보였다. 야외 내후성 시험이 진행된 후 방부목재에 남아있는 방부약제의 함량이 야외 내후성 시험 전보다 감소한 것으로 보아 야외 내후성 시험이 진행되는 동안 방부약제가 일부 용출된 것으로 보이며, 이에 따라 방부목재의 질량 감소가 무처리재와 유사한 수준으로 나타난 것으로 생각되었다. 과열증기를 이용한 열처리는 방부약제 주입과 같은 화학적인 처리 없이 친환경적으로 목재의 부후균과 해충에 대한 저항성을 개선시킬 수 있는 가능성이 확인되었으며, 이를 위하여 장기적인 관찰이 추가적으로 필요할 것이라 생각된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.200-200
• /
• 2012

We investigated a flexible transparent film using the spinning multi-walled carbon nanotubes (MWCNTs). Spin-capable MWCNTs on iron catalyzed on a SiO2 wafer was grown by chemical vapor deposition, which was performed at $780^{\circ}C$ using C2H2 and H2 gas. The average diameter and length of MWCNTs grown on the substrate were ~15 nm and $250{\sim}300{\mu}m$, respectively. The MWCNT sheets were produced by continuously pulling out from well-aligned MWCNTs on a substrate. The MWCNT sheet films were produced simply by direct coating on the flexible film or grass. The thickness of sheet film was remarkably decreased by alcohol spraying on the surface of sheet. The alcohol splay increased transmittance and decreased electrical resistance of MWCNT sheet films. Single and double sheets were produced with sheet resistance of ~699 and ${\sim}349{\Omega}/sq$, respectively, transmittance of 81~85 % and 67~72%, respectively. The MWCNT sheet films were heated through the application of direct current power. The flexible transparent heaters showed a rapid thermal response and uniform distribution of temperature. In addition, MWCNT yarns were prepared by spinning a bundle of MWCNTs from vertically super-aligned MWCNTs on a substrate, and field emission from the tip and side of the yarns was induced in a scanning electron microscope. We found that the field emission behavior from the tip of the yarn was better than the field emission from the side. The field emission turn-on voltages from the tip and side of MWCNT yarns were 1.6 and $1.7V/{\mu}m$, respectively, after the yarn was subjected to an aging process. Both the configuration of the tip end and the body of the yarn were changed remarkably during the field emission. We also performed the field emission of the sheet films. The sheet films showed the turn on voltage of ${\sim}1.45V/{\mu}m$ during the field emission.

• 한국지반공학회지:지반
• /
• 제14권6호
• /
• pp.139-151
• /
• 1998

SI 앵커는 지반개량 앵커를 의미한다. 이는 앵커를 지지하는 지반을 JSP로 개량한 것으로, SI 앵커체는 80cm 정도의 직경을 가지게 된다. SI 앵커는 앵커체와 지반사이의 마찰저항력과 앵커체 앞면의 지압저항력으로 인해 높은 인발저항력을 발휘하게 되는데, 특히 마찰저항력은 JSP로 개량된 앵커체의 직경의 증대로 인해 상당히 증가하게 된다. 본 연구에서는 SI 앵커의 인발저항기구를 분석하기 위해 실내 모형실험과 현장실험을 실시하였다. 공기건조 모래지반 내에서의 실내 모형실험을 통해 SI 앵커 주변지반의 변형률장을 분석하였는데, 이는 토조 벽면에 설치된 라텍스 멤브레인을 이용한 사진 분석법을 통해 이루어 졌다. 10매의 변형률게이지가 부착된 특수 설계된 PVC 파이프를 앵커체 내에 설치하고 변형률을 측정하여 현장실험의 결과를 분석하였는데, 역시 실내 모형실험과 같이 앵커체 내에서의 변형률을 측정하였다.

• 한국응용곤충학회지
• /
• 제36권1호
• /
• pp.105-110
• /
• 1997

Fenvalerate, cypermethrin, furathiocarb 및 prothiofos에 대해 각각 581, 18, 19, 11배의 저항성을 보인 진주계통과 fenvalerate와 furathiocarb에 대해 각각 38배와 9배의 저항성을 나타내고 있는 함양.서상계동을 bifenthrin과 prothiofos의 혼합조합으로 방제하기 위해 실내 엽침지법과 포장방제시험을 수행하였다. Bifenthrin 1EC와 prothiofos 50EC을 1:50으로 혼합하여 실내엽침지법으로 처리하였을 때 공력계수가 273.2로 최고점에 도달한 후 급격히 감소하는 양상을 보였다. 침지법에서 가장 효과적이었던 혼용비율의 조합을 함양.서상현지 농가에서 실증시험을 수행한 결과, 처리구에서 처리약량을 절반으로 줄였음에도 배추좀나방의 방제효과가 농가관행구와 마찬가지로 우수하였다. 또한 이 조합은 여러가지 대표적인 살충제에 대해 높은 저항성을 나타내고 있는 진주지역계통에 대해서도 합리적인 농약혼합으로 저항성문제에 적절히 대처할 수 있음을 보여주었다.

• 한국축산식품학회지
• /
• 제40권5호
• /
• pp.758-771
• /
• 2020

This study was to investigate the prevalence and characteristics of antimicrobial-resistant Staphylococcus aureus and methicillin-resistant S. aureus (MRSA) from 4,264 retail meat samples including beef, pork, and chicken in Korea between 2013 and 2018. A broth microdilution antimicrobial susceptibility testing was performed for S. aureus. Molecular typing by multilocus sequence typing (MLST), spa typing, and pulsed-field gel electrophoresis (PFGE), was performed on mecA-positive S. aureus strain. S. aureus was isolated at a rate of 18.2% (777/4,264), of which MRSA comprised 0.7% (29 strains). MLST analysis showed that 11 out of the 29 MRSA isolates were predominantly sequence type (ST) 398 (37.9%). In addition, ST72, ST692, ST188, ST9, and ST630 were identified in the MRSA isolates. The spa typing results were classified into 11 types and showed a high correlation with MLST. The antimicrobial resistance assays revealed that MRSA showed 100% resistance to cefoxitin and penicillin. In addition, resistance to tetracycline (62.1%), clindamycin (55.2%), and erythromycin (55.2%) was relatively high; 27 of the 29 MRSA isolates exhibited multidrug resistance. PFGE analysis of the 18 strains excluding the 11 ST398 strains exhibited a maximum of 100% homology and a minimum of 64.0% homology. Among these, three pairs of isolates showed 100% homology in PFGE; these results were consistent with the MLST and spa typing results. Identification of MRSA at the final consumption stage has potential risks, suggesting that continuous monitoring of retail meat products is required.