• Journal of Korean Academy of Nursing Administration
• /
• v.7 no.1
• /
• pp.97-110
• /
• 2001

An image exists in the thought of every subjective person and it exercises its influence over everything, having a great power in the real world. An positive image of the nurse has an influence on her faith, value and confidence, therefore increasing her job satisfaction, helping to upgrade her level of profession of nursing through qualitative nursing service as a result, considering the necessity of such an image when it comes to improvement of the profession, the confirmation of the image is indispensable to its evaluation of a speciality in nursing. This study is intended to help that improvement of the nursing profession in the present so that the total effort in every field of nursing is made and to offer basic material for developing a strategy to improve the image of nurses. This study is designed to investigate such an image descriptively. The subjects include 105 nurses, 60 doctors, 68 office workers, 88 medical engineers, 127 patients and there protectors with a total of 448 adapted with accidental sampling, who work at Y and W general hospital in Chonju. The measuring instrument consists of 40 question, with the researcher amended and made from on of Inja Song(1993), Donsoon Lee(1995), Ilsim yang(1998), and its Cronbach's alpha coefficient is .95. Data were collected from March 1 2000 to March 20, 2000 using self-reported questionnairs, analyzed with SPSS WIN 7.5 after encoding. The results are as follows: 1. Most of the subjects thinks the nursing as a hard, stressful, always busy job(more than 75%), and consider nurses as good-looking, supportive and responsible to co-workers to above average degree($50.0{\sim}74.9%$), especially it shows the idea that nursing is independently academic job and has come to fasten itself upon the public. But it shows below the everage($25.0%{\sim}49.9%$) in regard to self development as a specialist, affection for there job, an association activity, service to the community, high intelligence level and direct given patient nursing service. It also rated low as a recommendable job, independently nursing accomplishment, social position. 2. The nurses, patients and there protectors expressed more positive opinions than doctors, medical engineers, office workers about the image of the nurse(F=18.80, p=.00). This fact indicates that the former group evaluated the image similarly contrary to lowness of the latter. 3. In the study on what influenced upon the image, it defines to 79.8% by direct contact in the hospital or acquaintance with nurses, and 16.3% by mass media. 67.3% answered that they saw the image in a new light through hospitalization, which suggests an important source for the image management originates from caring for the quality of nursing service. Considering the evaluation of the image above, we need strategies to lead a unique professional knowledge and technological development, insurance of professional self-determination, high social position, participation in group activities, dedication to lifetime job, in order that nursing comes to expand as a professional occupation. Also, as for generating more positive images, we must take the quality of nursing service into account and offer and monitor correct information about the expanded role and function of the nurse continuously so that mass media reflect a more accurate image of nurses in general.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.3
• /
• pp.107-112
• /
• 2010

The Cu$(In_{1-x}Ga_x)Se_2$ is the absorber material for thin film solar cell with high absorption coefficient of $1{\times}10^5cm^{-1}$. In the case of CIGS, the movable energy band gap from $CuInSe_2$ (1.00 eV) to $CuGaSe_2$ (1.68 eV) can be acquired while controlling Ga contain ratio. Generally, the co-evaporator method have used for development and fabrication of the CIGS absorption layer. However, this method should need many steps and lengthy deposition time with high temperature. For these reasons, in this paper, a new growth method of CIGS layer was attempted to hydride vapor transport (HVT) method. The CIGS mixed-source material reacted for HCl gas in the source zone was deposited on the substrate after transporting to growth zone. c-plane $Al_2O_3$ and undoped GaN were used as substrates for growth. The characteristics of grown samples were measured from SEM and EDS.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.4
• /
• pp.365-369
• /
• 2016

Red sorrel (Rumex acetosella L.), as one of exotic weeds in Korea, was dominated in grassland and reduced the quality of forage. Improving current pasture productivity by precision management requires practical tools to collect site-specific pasture weed data. Recent development in unmanned aerial vehicle (UAV) technology has offered cost effective and real time applications for site-specific data collection. To map red sorrel on a hill pasture, we tested the potential use of an UAV system with digital cameras (visible and near-infrared (NIR) camera). Field measurements were conducted on grazing hill pasture at Hanwoo Improvement Office, Seosan City, Chungcheongnam-do Province, Korea on May 17, 2014. Plant samples were obtained at 20 sites. An UAV system was used to obtain aerial photos from a height of approximately 50 m (approximately 30 cm spatial resolution). Normalized digital number values of Red, Green, Blue, and NIR channels were extracted from aerial photos. Multiple linear regression analysis results showed that the correlation coefficient between Rumex content and 4 bands of UAV image was 0.96 with root mean square error of 9.3. Therefore, UAV monitoring system can be a quick and cost effective tool to obtain spatial distribution of red sorrel data for precision management of hilly grazing pasture.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.320-320
• /
• 2016

Nanocrystalline Carbon thin films have numerous applications in different areas such as mechanical, biotechnology and optoelectronic devices due to attractive properties like high excellent hardness, low friction coefficient, good chemical inertness, low surface roughness, non-toxic and biocompatibility. In this work, we studied the comparison of pure DC power and pulsed DC power in plasma sputtering process of carbon thin films synthesis. Using a close field unbalanced magnetron sputtering system, films were deposited on glass and Si wafer substrates by varying the power density and pulsed DC frequency variations. The plasma characteristics has been studied using the I-V discharge characteristics and optical emission spectroscopy. The films properties were studied using Raman spectroscopy, Hall effect measurement, contact angle measurement. Through the Raman results, ID/IG ratio was found to be increased by increasing either of DC power density and pulsed DC frequency. Film deposition rate, measured by Alpha step measurement, increased with increasing DC power density and decreased with pulsed DC frequency. The electrical resistivity results show that the resistivity increased with increasing DC power density and pulsed DC frequency. The film surface energy was estimated using the calculated values of contact angle of DI water and di-iodo-methane. Our results exhibit a tailoring of surface energies from 52.69 to $55.42mJ/m^2$ by controlling the plasma parameters.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.11
• /
• pp.32-40
• /
• 2016

IEEE 802.15.4 is the one of the protocols for radio communication in a personal area network. Because of low cost and low power communication for IoT communication, it requires the highest optimization level in the implementation. Recently, the studies of location aware algorithm based on IEEE802.15.4 standard has been achieved. Location estimation is performed basically in equal consideration of reference node information and blind node information. However, an error is not calculated in this algorithm despite the fact that the coordinates of the estimated location of the blind node include an error. In this paper, we enhanced a conventual maximum likelihood estimation using weighted coefficient and implement the hardwired location aware engine for small code size and low power consumption. On the field test using test-beds, the suggested hardware based location awareness method results better accuracy by 10 percents and reduces both calculation and memory access by 30 percents, which improves the systems power consumption.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.6
• /
• pp.286-304
• /
• 2017

In this study, we proposed a new-type of circular perforated caisson breakwater consisting of a bundle of latticed blocks that can be applied to a small port such as a fishing port, and numerically investigated the hydraulic characteristics of the breakwater. The numerical method used in this study is OLAFOAM which newly added wave generation module, porous media analysis module and reflected wave control module based on OpenFOAM that is open source CFD software published under the GPL license. To investigate the applicability of OLAFOAM, the variations of wave pressure acting on the three-dimensional slit caisson were compared to the previous experimental results under the regular wave conditions, and then the performance for irregular waves was examined from the reproducibility of the target irregular waves and frequency spectrum analysis. As a result, a series of numerical simulations for the new-type of circular perforated caisson breakwaters, which is similar to slit caisson breakwater, was carried out under the irregular wave actions. The hydraulic characteristics of the breakwater such as wave overtopping, reflection, and wave pressure distribution were carefully investigated respect to the significant wave height and period, the wave chamber width, and the interconnectivity between them. The numerical results revealed that the wave pressure acting on the new-type of circular perforated caisson breakwaters was considerably smaller than the result of the impermeable vertical wall computed by the Goda equation. Also, the reflection of the new-type caisson breakwater was similar to the variation range of the reflection coefficient of the existing slit caisson breakwater.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.5
• /
• pp.28-39
• /
• 2015

The purpose of this study is to analyze users' behavior and facility satisfaction and to suggest the practical solution plans for environmental improvement of trails in Suseong recreation park in Daegu. Therefore, satisfaction factor analysis on trails was carried out based on a field and questionnaire survey in Suseong recreation park. First, from users' behavior, 48% of users visited Suseong recreation park for walking. The greatest response to number of visits was once or twice a week, and average use time per visit was 80.4 minutes. In terms of trails, the greater responses to the number of visits were once(38.1%) or more than 5 times(23.8%), and average use time was 45.4 minutes. According to the results from the analysis of facility satisfaction, management condition, length, slope, and adjacent natural landscape of trails were evaluated at a satisfaction rate higher than 3.4 points. However, water pollution, and number of exits and parking lots were analyzed at a low rate of 2.75 and 2.78 points, respectively. In terms of analyzing determining factors of facility satisfaction for trails, use of facilities, walking convenience, surrounding landscapes, amenities, and noise had a significantly positive effect on satisfaction. In particular, walking convenience was the highest effect factor; its standardized coefficient was 0.533. The findings from this study can contribute to the improvement of the physical environment for trails of Suseong recreation park and provide basic data for plan and maintenance of similar waterside trails.

• Korean Journal of Environmental Agriculture
• /
• v.35 no.3
• /
• pp.166-174
• /
• 2016

BACKGROUND: The current study developed a monitoring method of 6 veterinary antibiotics (amoxicillin, ampicillin, enrofloxacin, tetracycline, chlortetracycline, oxytetracycline) in agricultural soils using liquid chromatography-tandem mass spectrometry (LC-MS/MS) in positive electrospray ionization mode.METHODS AND RESULTS: Sample preparation was carried out using acidic acetonitrile and citrate salts followed by purification with dispersive solid phase extraction (d-SPE). Separation on Eclipse Plus C₁₈ column was conducted in gradient of the mobile phase, 0.1% formic acid and 5 mM ammonium formate in methanol (A) and 0.1% formic acid and 5 mM ammonium formate in distilled water (B). The linearity of the matrix-matched calibrations expressed as the coefficient of determination was good with R²≥0.9900. The limit of quantifications (LOQs) ranged from 0.5 to 10 μg/kg for all analytes. Analysis of 51 agricultural soil samples taken in the Republic of Korea revealed concentrations less than 1.9 μg/kg for enrofloxacin, 75.5 μg/kg for chlortetracycline.CONCLUSION: The method was successfully applied to monitor 6 veterinary antibiotics from 51 field incurred agricultural soil samples in 17 provincial areas throughout the Republic of Korea. The developed method was simple, easy, and versatile and can be used for monitoring various veterinary antibiotics in soil.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.10
• /
• pp.39-49
• /
• 2018

In this study, aimed at determining the elastic modulus of deep mixed samples, 320 test specimens were developed by mixing 8%, 10%, 12%, and 14% of stabilizer mixture in the granular conditions of clay, sand and gravel. Uniaxial compression tests were carried out using these specimens, and the uniaxial compression strength and strain were analyzed to determine the secant elastic modulus and tangent elastic modulus. Laboratory test results showed that the uniaxial compression strength of all deep mixed samples increased with increasing curing time and stabilizer mixing ratio, and that the secant elastic modulus and the tangen elastic modulus also increased. The increase of the elastic modulus according to the curing period turned out greater in the tangent elastic modulus than in the secant elastic modulus. In order to measure elastic modulus with changes in stabilizer mixing ratio, the correlation coefficient between the elastic modulus for stabilizer mixing ratio of 8% and that of 10%, 12% and 14% was calculated respectively by the specimen condition. The elastic modulus tended to increase as the grain size in a deep mixed specimen increased. The distribution of grain size that had the greatest effect appeared when the composition ratio of sand was high. On the other hand, the increase in the elastic modulus was larger in the sand specimens than in the clay and gravel specimens. Based on these results, it is suggested that a pertinent soil parameter of the deep mixed ground in the field may be obtained by the particle size distribution and the mixing ratio of stabilizer of the deep mixed soil.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_3
• /
• pp.1187-1195
• /
• 2019

We, for the first time, developed a Raman lidar system which can remotely detect surface CO₂ volume mixing ratio (VMR). The Raman lidar system consists of the Nd: YAG laser of wavelength 355 nm with 80 mJ, an optical receiver, and detectors. Indoor CO₂ cell measurements show that the accuracy of the Raman lidar system is calculated to be 99.89%. We carried out the field measurement using our Raman lidar at Pukyong National University over a seven-day period in October 2019. The results show good agreement between CO₂ VMRs measured by the Raman lidar (CO₂ Raman Lidar) and those measured by in situ instruments (CO₂ In situ) which located 300 m and 350 m away from the Raman lidar system. The correlation coefficient (R), mean absolute error (MAE), and root mean square error (RMSE) between CO₂ In situ and CO₂ Raman Lidar are 0.67, 2.78 ppm, and 3.26 ppm, respectively.