• Transactions of Materials Processing
• /
• v.19 no.8
• /
• pp.468-473
• /
• 2010

Shape memory alloys (SMAs) have the ability to recover their original shape upon thermo-mechanical loading even after large inelastic deformation. The unique feature is known as pseudoelasticity and shape memory effect caused by the crystalline structural transformation between two solid-state phases called austenite and martensite. To support the engineering application, a number of constitutive models, which can be formally classified into either micromechanics-based or phenomenological model, have been developed. Most of the constitutive models include a kinetic law governing the crystallographic transformation. The present work presents a one-dimensional, phenomenological constitutive model for SMAs in the context of the unified viscoplasticity theory. The proposed model does not incorporate the complex mechanisms of phase transformation. Instead, the effects induced by the transformation are depicted through the growth law for the back stress that is an internal state variable of the model.

• Elastomers and Composites
• /
• v.53 no.2
• /
• pp.52-56
• /
• 2018

The present study examines the transformation of dynamic DSC data into the equivalent isothermal data for the formation kinetics of a polyurethane elastomer. The reaction of 2'-dichloro-4,4'-methylenedianiline (MOCA) with a PTMG/TDI-based isocyanate prepolymer was evaluated. DSC measurement was performed in the dynamic scanning mode with several different heating rates to obtain the reaction thermograms. Then, the data was transformed into the isothermal data through a procedure based on Ozawa analysis. The main feature of this procedure was the transformation of $({\alpha}-T)_{\beta}$ curves from dynamic DSC into $({\alpha}-t)_T$ curves using the isoconversional $(t-T)_{\alpha}$ diagram. Validity was discussed for the relationship between the dynamic DSC data and the transformed isothermal results.

• KIPS Transactions on Software and Data Engineering
• /
• v.3 no.9
• /
• pp.375-380
• /
• 2014

Under controlled environment, such as fixed viewpoints or consistent illumination, the performance of face recognition is usually high enough to be acceptable nowadays. Face recognition is, however, a still challenging task in real world. SIFT(Scale Invariant Feature Transformation) algorithm is scale and rotation invariant, which is powerful only in the case of small viewpoint changes. However, it often fails when viewpoint of faces changes in wide range. In this paper, we use Affine SIFT (Scale Invariant Feature Transformation; ASIFT) to detect affine invariant local descriptors for face recognition under wide viewpoint changes. The ASIFT is an extension of SIFT algorithm to solve this weakness. In our scheme, ASIFT is applied only to gallery face, while SIFT algorithm is applied to probe face. ASIFT generates a series of different viewpoints using affine transformation. Therefore, the ASIFT allows viewpoint differences between gallery face and probe face. Experiment results showed our framework achieved higher recognition accuracy than the original SIFT algorithm on FERET database.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.5
• /
• pp.1413-1432
• /
• 2023

Recommender systems aim to recommend items to users by taking into account their probable interests. This study focuses on creating a model that utilizes multiple sources of information about users and items by employing a multimodality approach. The study addresses the task of how to gather information from different sources (modalities) and transform them into a uniform format, resulting in a multi-modal feature description for users and items. This work also aims to transform and represent the features extracted from different modalities so that the information is in a compatible format for integration and contains important, useful information for the prediction model. To achieve this goal, we propose a novel multi-modal recommendation model, which involves extracting latent features of users and items from a utility matrix using matrix factorization techniques. Various transformation techniques are utilized to extract features from other sources of information such as user reviews, item descriptions, and item categories. We also proposed the use of Principal Component Analysis (PCA) and Feature Selection techniques to reduce the data dimension and extract important features as well as remove noisy features to increase the accuracy of the model. We conducted several different experimental models based on different subsets of modalities on the MovieLens and Amazon sub-category datasets. According to the experimental results, the proposed model significantly enhances the accuracy of recommendations when compared to SVD, which is acknowledged as one of the most effective models for recommender systems. Specifically, the proposed model reduces the RMSE by a range of 4.8% to 21.43% and increases the Precision by a range of 2.07% to 26.49% for the Amazon datasets. Similarly, for the MovieLens dataset, the proposed model reduces the RMSE by 45.61% and increases the Precision by 14.06%. Additionally, the experimental results on both datasets demonstrate that combining information from multiple modalities in the proposed model leads to superior outcomes compared to relying on a single type of information.

• Korean Journal of Remote Sensing
• /
• v.17 no.1
• /
• pp.85-97
• /
• 2001

The KT(Kauth-Thomas) and IHS(Intensity-Hue-Saturation) transformation techniques were introduced and compared to investigate fire-scarred areas with single post-fire Landsat 7 ETM+ image. This study consists of two parts. First, using only geometrically corrected imagery, it was examined whether or not the different level of fire-damaged areas could be detected by simple slicing method within the image enhanced by the IHS transform. As a result, since the spectral distribution of each class on each IHS component was overlaid, the simple slicing method did not seem appropriate for the delineation of the areas of the different level of fire severity. Second, the image rectified by both radiometrically and topographically was enhanced by the KT transformation and the IHS transformation, respectively. Then, the images were classified by the maximum likelihood method. The cross-validation was performed for the compensation of relatively small set of ground truth data. The results showed that KT transformation produced better accuracy than IHS transformation. In addition, the KT feature spaces and the spectral distribution of IHS components were analyzed on the graph. This study has shown that, as for the detection of the different level of fire severity, the KT transformation reflects the ground physical conditions better than the IHS transformation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.5
• /
• pp.297-311
• /
• 2021

Around the world, there is an increasing interest in Digital Twin cities. Although geospatial data is critical for building a digital twin city, currently-established spatial data cannot be used directly for its implementation. Integration of geospatial data is vital in order to construct and simulate the virtual space. Existing studies for data integration have focused on data transformation. The conversion method is fundamental and convenient, but the information loss during this process remains a limitation. With this, standardization of the data model is an approach to solve the integration problem while hurdling conversion limitations. However, the standardization within indoor space data models is still insufficient compared to 3D building and city models. Therefore, in this study, we present a comparative analysis of data models commonly used in indoor space modeling as a basis for establishing a generic indoor space feature model. By comparing five models of IFC (Industry Foundation Classes), CityGML (City Geographic Markup Language), AIIM (ArcGIS Indoors Information Model), IMDF (Indoor Mapping Data Format), and OmniClass, we identify essential elements for modeling indoor space and the feature classes commonly included in the models. The proposed generic model can serve as a basis for developing further indoor feature models through specifying minimum required structure and feature classes.

• Spatial Information Research
• /
• v.12 no.2
• /
• pp.151-163
• /
• 2004

This study aims to develop a standard protocol by which users can exchange data information efficiently between KOSDIC and GIS. The ultimate goal from this study is to propose a data exchange format using KOSIC. The background of this study is that GIS industry sector is vigorously developing linked to spatial information construction such as UIS, LIS, EIS, AM/FM through supporting by regional government institution. According to do, the format of data transformation becomes major issue. GIS data can easily transfer to CAD version but when CAD data convert to GIS format (DWG->DXF->SHP) cannot get high success rate due to errors and problems. In addition, CAD data feature is made from oriental structure which is made of point and line faeture so that GIS system is impossible to data transformation. In the reason, the biggest problem is discordance of symbolization in integration and standard of data format. By investigation the usability of this study, conclusion are drawn efficient alternative plan in data transformation. Though this wort we will be able to provide a better transformation of data conversion between CAD format and GIS format. Accordingly, it is of important to enrich the integrated construction information infrastructure, which accommodates ever-changing constructions environment.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.1E
• /
• pp.43-48
• /
• 2003

The effects of linear acoustic channels have been analyzed and compensated at mel-frequency feature domain. Unlike popular RASTA filtering our approach incorporates separate filters for each mel-frequency band, which results in better recognition performance for heavy-reverberated speeches.

• Korean Journal of Cognitive Science
• /
• v.14 no.1
• /
• pp.11-16
• /
• 2003

This Paper extracts the edge of main components of face with Gator wavelets transformation in facial expression images. FCM(Fuzzy C-Means) clustering algorithm then extracts the representative feature points of low dimensionality from the edge extracted in neutral face. The feature-points of the neutral face is used as a template to extract the feature-points of facial expression images. To match point to Point feature points on an expression face against each feature point on a neutral face, it consists of two steps using a dynamic linking model, which are called the coarse mapping and the fine mapping. This paper presents an automatic extraction of feature-points by dynamic linking model based on Gabor wavelets and fuzzy C-means(FCM) algorithm. The result of this study was applied to extract features automatically in facial expression recognition based on dimension[1].

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.05a
• /
• pp.249-252
• /
• 2008

소프트웨어 제품 개발에 있어서 생산성 증가와 비용 절감을 위해 기존 생성된 산출물의 재사용이 중요시 되고 있다. 이 재사용의 초점은 소스 코드의 재사용에서, 설계의 재사용, 도메인 공학에 초점을 둔 재사용으로 발전 되어 왔고, 재사용 자원을 만들기 위한 도메인 분석방법에 대한 연구가 이루어지고 있다. 현재 유사한 도메인에 대한 온톨로지 기반 feature 공통성과 가변성 분석 기법에 대한 연구가 있으나, feature 와 온톨로지에 대한 메타모델 차원의 명확한 분석과 모델들간의 매핑 프로파일이 없어서 일관성 있는 변환을 저해하고 있다. 본 논문에서는 메타모델 차원에서 온톨로지를 이용한 feature 모델과 OWL 간의 변환 방법을 제시한다. 이를 위해 feature 와 OWL 에 대한 메타모델을 정의하고, 이 속성들에 기반하여 feature 모델과 OWL 간 변환 프로파일과 알고리즘을 생성한다. 그리고 제시한 변환 규칙을 이용하여 전자결재 시스템을 통해 실제 적용함으로써 일관성 있는 모델 변환을 보여준다.